I would like to change the order of the point grip/roll over from
move lable
rotate lable
reset lable rotation
reset lable
to
rotate lable
move lable
reset lable rotation
reset lable
I can not find this in the CUI.
I still having this issue: in Civil 3D 2013 spanish, after intalled SP1, draw order commands (right click > draw order) get a message " command not recognized"
View 3 Replies View RelatedIs there a way to change the order of the Profile Hatch after it's been done as later solid hatches are displaying over the earlier ones?
The only way I've been able to do this is to delete all and then create in the correct order which is a bit of a PITA.
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
Is there a better an easier way to change the order of input/output parameters in the subassembly that i've created in SAC 2013 than the one where you have to go into a XML-file in the PKT archive file?
I've created my subassembly and I want to control the order of parameters to have a flow similar to the actual workflow.
how do I re-order or change the order of images within a file?
View 2 Replies View RelatedI have an HP Designjet 800 that is currently loaded with a 36" roll. I'd like to print to ANSI D in a landscape orientation, but D (landscape) isn't an option in the paper size drop down. Printing D in portrait orientation just wastes a bunch of paper space.
How do I change the paper from 22x34 to 34x22? (or vice versa, whichever way I need).
I've got most of my most commonly used keyboard commands changed to simplified versions that suit me, however, I have not figured out how to change the snap commands. I still type "nea" and "per" to snap to nearest and perpendicular. How do I change these?
Also, how do you change the F keys?
I need to change the shortcut commands but cannot find the file or how to do it in AutoCAD LT 2012. I had to reinstall due to a virus in my computer and I cannot remember how to do this, it has been too long.
View 2 Replies View RelatedI'm having trouble with the renaming of X-refs.i have made a script file that re-paths required x-refs to a new project, but this leaves the x-ref name as the old x-ref. Any keyboard commands to change the name? or to set the name to file name?
View 9 Replies View RelatedI didn't like the name of my custom Pulldown that I made:
DSI-Menu.cuix
I Did a Save as:
DSI-Menu_sc.cuix
All the custom Commands list the original DSI-Menu as the source. Can I somehow change that so that the source is DSI-Menu_sc?
I know that when I select a group of objects and then list them, the list displays the properties in the order I drew them, is there any option I can change this order? I mean, for example the direction I select them or something like that.
View 1 Replies View RelatedIs there any way to modify the order of the views that have been placed on the drawing sheet? We have a lot of times where we place an assembly view to drive the title block and then place the child components for detailing. Too many time the assembly view gets forgotten until you are done detailing the other parts, now instead of the assembly name showing on that sheet it is the first part you inserted. I would like to be able to select a view and tell Inventor that I would like this view to be the first view instead so I don't have to copy and past everything from one sheet to another. I used to have some code that looked at that first view but I can't find it anymore.
View 1 Replies View RelatedHow to change the attribut order in the question sequence.
View 6 Replies View Relatedhow to change the order of custom iProperties. I would like to group like iProperties together to make editing a bit easier.
Windows 7 Pro, SP1
Inventor 2012 SP1
Due to the nature of our business, I am not permitted to attach any files showing models or .idw environments of any actual work-related components.
I have been working on an extensive template and wanted to add some layer filters too it. I was wondering if there was a list anywhere that outlines what different characters mean to the fillter? What I mean is... I know that ~*|* excludes xfref layers because ~ means 'not' and * means "anything" and | is the character we are looking for. But what are all the other things that filters understand?
View 2 Replies View RelatedCivil 3D 2013 on Windows 7 64-bit:
Cannot use UNDO on command line because I have to enter the command many, many times to ever undo anything.
I therefore use the UNDO pull-down in the quick access toolbar; however, a few simple zooms and/or pans using the mouse wheel results in many, many (it seems like hundreds of them) "Group of Commands" items. I have to work my way back through (that is highlighting) many of these to ever get back far enough to undo something simple like an erase of an object. It works like this even if the erase (or whatever) was the last command issued--besides zooming and panning.
The mouse wheel zooming and panning seems to be what is adding all of the "group of commands" listings in the undo list. I must say this seems like a terrible bug in the software to me.
Combine zoom and pan IS checked under user preferences of options.
Just had to repair my installation, now I am unable to use any Civil 3D commands, anything with "AECC" in front of it is coming back with "unknown command"?
View 1 Replies View RelatedMy program crashed and upon restarting it some settings have changed. The biggest change is that I am unable to select objects and then execute a command. What the program is doing is when I select the objects I want a particular command executed, it will de-select all of the object and then execute the command. I then will have to reselect my objects. This makes deleting line work a little mor inconvenient. What setting is this and where can I change it back.
View 1 Replies View RelatedI'm trying to update company title blocks, I have had success loading in the raster image and plotting a few.
Although everynow and then the image frame prints.
So I have checked,
IMAGEFRAME > is 2
FRAME > is 2
Can you think or know of any other varibles I might need to change in order to plot the raster without the frame?
We have lost the use of the two transparent commands 'spe and 'sse. When I either click on the toolbar or type 'spe or '_spe in the middle of a command, they don't work like the other transparent commands. When I click on toolbar by itself, I get an error "Unknown comment "SPE". The other transparent commands say something like "PSE must be called from within another command".
Also, is the actual comment 'spe the command name or is it an alias. I was thinking that if I knew the command name, I could create another allias as a work around.
This is happening on multiple computers.
I recently upgraded to Civil 3D 2013 and now all of my "Create Surface" commands do not work. I get the message " _AeccCreateSurfaceGridFromDEM Unknown command "AECCCREATESURFACEGRIDFROMDEM".
View 2 Replies View RelatedI have come across a situation whereby when a user redefines a block in a drawing it is changing the draw order of the xrefs.The block in question is the Plan frame, and is located in paperspace. The user redefines the block and the xrefs change their draw order in the viewport. A regen does not unfortunately correct the issue.Drawings were created with Civil 3D 2010. The plan frame block is a dynamic block.
View 0 Replies View RelatedI have the "create section view" command.
Ok, I'd want to have other (others) custom command "create section view2" and optionally call it from an icon.
These commands are saved with the drawing? ( I think yes). Would be there a possiblity to have easy access to this elements to deal with them ? Is it impossible?
Having custom commands cloned and customized from existing
Is there a known problem with 2013 undo? I can be in a new drawing issue 2 commands and the undo drop down is populated with 100's of group commands, makinf Ctrl z useless
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
Note: Its all Resistentialism, so keep calm and carry on
64 Bit Win7 OS
I am using Civil 3D 2013, Windows 7 x64.
Intellizoom does not seem to work properly on certain drawings, where if I undo... nothing happens. Rather, it tries to undo *each* click of my scroll wheel, without doing anything. This results in dozens and hundreds of undo commands, most of which are totally useless. This of course breaks my undo command, rendering it almost pointless. If I make a change, zoom out and decide that the change is not needed, I cannot easily undo; I have to undo something like 50 "commands" that do nothing, before I get to the "real" undo that I wanted to undo in the first place.
I understand there is the "Combine zoom and pan commands"; this is checked off. It does not seem to do anything. How do I make my undo command useful again? As a keyboard user, I want to use ctrl-z for my undos. I do not want to go to the undo button, pull down the menu, and search trhough the 50 commands to find the correct command to undo to, especially since I never had this problem before in previous versions of Civil 3D.
Some additional information:
1. I can open some other drawings that get the correct undo/zoom behaviour.
2. I can open the drawing I have problems with using a previous version of Civil 3d (2012), and get the correct undo/zoom behaviour.
I am using Batch files created under the Survey Command. I want to list the coordinate value of points created, What setting do I set to show this.
View 2 Replies View RelatedHow to keep the snap mode settings from disappearing after certain commands. For example every time I use a lisp routine I have to go and reset my settings because they are no longer the way I had them set before I performed the lisp command.
View 9 Replies View RelatedMy company upgraded our AutoCAD from 2007 to 2009 this past Monday. I'm getting an error message when trying to change the order of objects in model space.
Command: Unknown command "AI_DRAWORDER". Press F1 for help.
Command: Unknown command "FRONT". Press F1 for help.
My draworder tool bar buttons and pull down commands are not working. I click on them and get
Command: Unknown command "AI_DRAWORDER". Press F1 for help.
Command: Unknown command "FRONT". Press F1 for help.
This is the same issue for all of the draworder commands.
If I type draworder in the commande line I can get it to work. How do I restore my tool bar commands to get them to work?
Why the Layer Order in the dropdown isn't in alphabetical order (undocumented software feature perhaps....?)
View 2 Replies View RelatedI am needing to grade out from a featureline that is in cut to daylight in the fill direction (drainage flows away from the featureline). To do this I have created a grading critieria that has the Fill First Search Order parameter locked. I have verified that there is a fill solution if I use a 0.2% slope on the grading. Yet when I apply the grading it always uses the cut solution. It refuses to find a fill solution even if I apply 0.05% slope to the grading.
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
[URL]...