I have been working on an extensive template and wanted to add some layer filters too it. I was wondering if there was a list anywhere that outlines what different characters mean to the fillter? What I mean is... I know that ~*|* excludes xfref layers because ~ means 'not' and * means "anything" and | is the character we are looking for. But what are all the other things that filters understand?
View 2 RepliesI want to create a Layer Filter that excludes both Civil Layers and Xrefs.
I have created one that excludes Civil objects (Excel Civil.jpg) but when I add a filter for excluding xrefs as well the Civil objects appear in the filter again indeed all the layers are included again (Excel Xref.jpg) if I invert the filter nothing is displayed.
On one of the machines here we seem to have lost the functionality of the layer filters. When a group filter is created, it shows in the list, you can add layers to the filter, but when you view the filtered layers, its all the layers. Also, when there are unreconciled layers and you navigate to this filter, it shows the entire layer list. Is there some setting that may have been changed?
Civil 3D 2013.
Windows 7 64
Intel Core i7 2.0 GHz 2.0 GHz
8 GB RAM
Nvidia GeForce GTX460M
Civil 3D 2012 SP2.1
I have the Layer Filter Control as per the screenshot but can it be moved as per the arrow location using the CUI, and if so, how?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
In my template, is there a way to setup a layer filter or layer state to automatically plot a different viewport color when a new drawing is created and viewports are made? Note, my template does not have viewports premade.
I've set all my Existing and Proposed Utilities to use the WV Miss Utility colors, but I designated either pale (odd color#) for existing and bold (even color#) for proposed so that in model space there's a visual difference. See a few examples below:
V-SSWR-PIPE (color 91)
V-WATR-PIPE (color 151)
C-SSWR-PIPE (color 92)
C-WATR-PIPE (color 152)
Our Civil dept doesn't use colors, but our Utility dept does occasionally especially when Aerials are used.
When we create layouts/viewports in a drawing, it would be nice to have viewport layer colors automatically be set to plot black or gray or be on/off depending on existing conditions sheet or proposed site plan sheet. The only way I know of is if I would set up viewports inside my template with VP Color Overrides preset and/or VP freezes for certain layers, which I'm hesitant in doing.
In my layer properties manager. If I insert an xref I get all kinds of extra layers. I have to scroll through a long list. How can I create a filter to not display these?
View 6 Replies View RelatedScript (command) to make filter and then select any filter.
I have to run this operation on several files. So, needs it script.
It appears that the Layer Filters functionality is broken again with 2013. Unchecking the "Apply layer filter to layer toolbar" disables the function of layer filters in the tool palette.
View 5 Replies View RelatedI'm adjusting a photographic image and am using both a filter effect and a layer style in the same layer on a Smart Object. I want to separate the two effects into two layers, so one layer has the filter effect (Nik) and one layer has the layer style (Color Overlay) (with the goal of merging/rasterizing the Nik filter effect with the Smart Object but keeping the layer style unmerged). I can make two layers and move one effect without problem, but the visual result of each effect on a separate layer is quite different from having both effects in the same layer. The Blend Mode for all my layers is Normal. Within the Color Overlay panel, the blend mode is Linear Burn.
Layer 1: a layer style and a filter effect, stacked
looks very different from....
Layer 2: a layer style
Layer 1: a filter effect
I made a wax seal on Photoshop with a lot of embossment, bedevilment and a Smart Filter. It's done and I just need to make it smaller so it fits well on my certificate. When I resize it (Ctr + T) It pops up a message that reads:
______________________________________________
Adobe Photoshop CS6 Extended
"Smart Filters applied to layers contained in this group will be turned off temporarily while the transform is being previewed. They will be applied after committing the transform."
OK
[] Don't show again
______________________________________________
I click OK and I re-size the layer with free transform, and then hit enter. The Layer is resized but my Smart Filter which creates a wavy affect around the seal is totally distorted.
How do re-size my layer with smart filter without affecting the smart filter aspect of the layer.
Civil 3D 2013 on Windows 7 64-bit:
Cannot use UNDO on command line because I have to enter the command many, many times to ever undo anything.
I therefore use the UNDO pull-down in the quick access toolbar; however, a few simple zooms and/or pans using the mouse wheel results in many, many (it seems like hundreds of them) "Group of Commands" items. I have to work my way back through (that is highlighting) many of these to ever get back far enough to undo something simple like an erase of an object. It works like this even if the erase (or whatever) was the last command issued--besides zooming and panning.
The mouse wheel zooming and panning seems to be what is adding all of the "group of commands" listings in the undo list. I must say this seems like a terrible bug in the software to me.
Combine zoom and pan IS checked under user preferences of options.
Just had to repair my installation, now I am unable to use any Civil 3D commands, anything with "AECC" in front of it is coming back with "unknown command"?
View 1 Replies View RelatedMy program crashed and upon restarting it some settings have changed. The biggest change is that I am unable to select objects and then execute a command. What the program is doing is when I select the objects I want a particular command executed, it will de-select all of the object and then execute the command. I then will have to reselect my objects. This makes deleting line work a little mor inconvenient. What setting is this and where can I change it back.
View 1 Replies View RelatedI still having this issue: in Civil 3D 2013 spanish, after intalled SP1, draw order commands (right click > draw order) get a message " command not recognized"
View 3 Replies View RelatedI would like to change the order of the point grip/roll over from
move lable
rotate lable
reset lable rotation
reset lable
to
rotate lable
move lable
reset lable rotation
reset lable
I can not find this in the CUI.
We have lost the use of the two transparent commands 'spe and 'sse. When I either click on the toolbar or type 'spe or '_spe in the middle of a command, they don't work like the other transparent commands. When I click on toolbar by itself, I get an error "Unknown comment "SPE". The other transparent commands say something like "PSE must be called from within another command".
Also, is the actual comment 'spe the command name or is it an alias. I was thinking that if I knew the command name, I could create another allias as a work around.
This is happening on multiple computers.
I recently upgraded to Civil 3D 2013 and now all of my "Create Surface" commands do not work. I get the message " _AeccCreateSurfaceGridFromDEM Unknown command "AECCCREATESURFACEGRIDFROMDEM".
View 2 Replies View RelatedI have the "create section view" command.
Ok, I'd want to have other (others) custom command "create section view2" and optionally call it from an icon.
These commands are saved with the drawing? ( I think yes). Would be there a possiblity to have easy access to this elements to deal with them ? Is it impossible?
Having custom commands cloned and customized from existing
Is there a known problem with 2013 undo? I can be in a new drawing issue 2 commands and the undo drop down is populated with 100's of group commands, makinf Ctrl z useless
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
Note: Its all Resistentialism, so keep calm and carry on
64 Bit Win7 OS
I am using Civil 3D 2013, Windows 7 x64.
Intellizoom does not seem to work properly on certain drawings, where if I undo... nothing happens. Rather, it tries to undo *each* click of my scroll wheel, without doing anything. This results in dozens and hundreds of undo commands, most of which are totally useless. This of course breaks my undo command, rendering it almost pointless. If I make a change, zoom out and decide that the change is not needed, I cannot easily undo; I have to undo something like 50 "commands" that do nothing, before I get to the "real" undo that I wanted to undo in the first place.
I understand there is the "Combine zoom and pan commands"; this is checked off. It does not seem to do anything. How do I make my undo command useful again? As a keyboard user, I want to use ctrl-z for my undos. I do not want to go to the undo button, pull down the menu, and search trhough the 50 commands to find the correct command to undo to, especially since I never had this problem before in previous versions of Civil 3D.
Some additional information:
1. I can open some other drawings that get the correct undo/zoom behaviour.
2. I can open the drawing I have problems with using a previous version of Civil 3d (2012), and get the correct undo/zoom behaviour.
I am using Batch files created under the Survey Command. I want to list the coordinate value of points created, What setting do I set to show this.
View 2 Replies View RelatedHow to keep the snap mode settings from disappearing after certain commands. For example every time I use a lisp routine I have to go and reset my settings because they are no longer the way I had them set before I performed the lisp command.
View 9 Replies View RelatedMy draworder tool bar buttons and pull down commands are not working. I click on them and get
Command: Unknown command "AI_DRAWORDER". Press F1 for help.
Command: Unknown command "FRONT". Press F1 for help.
This is the same issue for all of the draworder commands.
If I type draworder in the commande line I can get it to work. How do I restore my tool bar commands to get them to work?
I have a curve which is a set of lines and arcs.This is present on a layer. code to filter these objects based on layer.I also need to convert all the object ids to a single entity.
View 4 Replies View RelatedJust upgraded to LT13 from LT12 and noticed that the layer filters don't change the list of layers in the manager. for example if I click on an xref'd drawing in the filter tree in past versions only the layers in that drawing would be visible. In 13 all layers are still visible. Is there a setting in this version I am unaware of?
I'm sure this is the first of several "quirks" I will discover with the new version that I will most assuredly ascribe to a step backwards in functionality in the interest of pushing out a new piece of software. How many days before the first service pack is available?
How to bring Layer filter from one drawing to another drawing?
View 1 Replies View RelatedI'm trying to set the active Layer filter. I tried myDB.LayerFilters.Root.Name = "Filter1" but it wouldn't work.
View 9 Replies View RelatedI'm having issues with Civ3d 2013. I pushed off upgrading because of the format change and the service pack release. I was hoping little glitches would be fixed.Here are the a couple of glitches to date that I saw no resolution to in the long list of threads.
1. Layer filters do not filter, unless I have checked "Apply filter to toolbar". The problem is, I don't want to apply them to the toolbar.
2. Publishing to PDF - when set to lines merge (set in the page layout and the publish setting), the wipe outs don't work, and the background masks on leaders makes a faint border around the text in the PDF. When set to overwrite, to get the wipeouts to not print to the PDF as a big black blob, they have to be on a layer set to color 255. I can work around most of the wipeouts, except for dimensions because the background mask doesn't seem to take.
another complaint that doesn't have anything to do with AutoCAD, but since I'm venting... we just got a KIP 7100 printer/scanner. WORST printer/scanner we've ever had. Period. Getting the right driver, then getting the driver to produce good drawings to the correct paper size was ridiculous, and the gray shades still look like we're using a big dot matrix printer. Scanning is the most painful thing; compared to the Xerox 6204 we gave up, the quality is poor and PDF file sizes are huge.
I'm attempting to create a layer property filter so that all used layers except xref ones show up. I can use the Invert filter option, but that doesn't stay checked between sessions for some reason. How can I set up this property filter?
View 2 Replies View RelatedI have AutoCAD LT 2008 soon to be LT 2012 and I also have AutoCAD 2012.
I would like to know if there is a way that I can set up a Layer Filter and transfer it from one drawing to another.
Ideally we would be able to do this in the LT version not full. If there is some way to do this with Tool Palletes that would be great.
I have files with oodles and oodles of layers, mostly from various x-refs. I Purge as many layers from x-refs as I can but we all know how fond some *cough*engineers*cough* are of layers. When I use the Layer Manager, I first click on the X-ref-category and then tick the Invert-box at the bottom. This nifty trick means that I only see the layers that I have created in my drawing.
The problem comes when I open the drawing the next time.
The X-ref-category is still in effect but the Invert-box is unticked. This means that I see all layers that I didn't create that are in the drawing. This is all fine and dandy if I am in the Layer Manager. But I also use the drop-down-layer-list on the Ribbon to quickly change layer on obejcts. And that drop-down-list is affected by the sorting in the Layer Manager. So I can't move my objects to the layer I want, because all I see in the drop-down-list are the x-ref layers.
As I said, this is more of a peeve than anything, and it's not a big deal to open the layer manager, click All Layers and then go on with my life. But it's just one more sigh each time I open a drawing.
Why can't the Invert-box stay ticked?
Or why can't the selection revert back to All and not stay on x-ref-layers?