My draworder tool bar buttons and pull down commands are not working. I click on them and get
Command: Unknown command "AI_DRAWORDER". Press F1 for help.
Command: Unknown command "FRONT". Press F1 for help.
This is the same issue for all of the draworder commands.
If I type draworder in the commande line I can get it to work. How do I restore my tool bar commands to get them to work?
I am unable to use pull down menu commands, for example when I want to save as, I have to type it manually in the command menu...to open a file I have to type the file name at command line..
when I click save as or any other command from the pull down menu, it does not work, the command line apprars at the buttom of the drawing asking me to manually make an imput...
Just had to repair my installation, now I am unable to use any Civil 3D commands, anything with "AECC" in front of it is coming back with "unknown command"?
View 1 Replies View RelatedWe have lost the use of the two transparent commands 'spe and 'sse. When I either click on the toolbar or type 'spe or '_spe in the middle of a command, they don't work like the other transparent commands. When I click on toolbar by itself, I get an error "Unknown comment "SPE". The other transparent commands say something like "PSE must be called from within another command".
Also, is the actual comment 'spe the command name or is it an alias. I was thinking that if I knew the command name, I could create another allias as a work around.
This is happening on multiple computers.
I just had to replace my desktop computer, reinstalled AutoCad, set it up using a saved profile, everything was working fine until this morning when I came in and most of my buttons on the toolbars return "Unknown Command". Now even when I type in the command on the command line it doesn't recognize the commands. ie _layfrz Unknown command "LAYFRZ) I've gone in and "repaired" the program, shut down the computer for a full restart, to no avail.
View 3 Replies View RelatedIs there a way to lock draworder objects in place?
At the very least, I'd like to position x-refs in a particular order and then lock them there so that they never mistakenly change order. For example...
Back: Aerial photo *.dwg x-ref file
Next: Hatch pattern *.dwg x-ref file
Next: Existing topo *.dwg x-ref file
Next: Proposed linework *.dwg x-ref file
Front: Everything else in that specific primary file
I generally dislike nesting x-refs if I can avoid it.
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
Working in 2013 Raster Design. The commands for raster tools are not working. When attempting to insert an image the following message appears:
c:program filesautodeskautocad raster design 2013aeciibui56.arx cannot find a dll or other file that it needs. Unknown command "IINSERT". Press F1 for help.
Similar messages appear when trying other commands located within the Raster Tools tab.
When I try typing "L" for line and hit enter (space bar), then click the mouse to draw a line nothing happens. The command is active and the grips are active like the command is ready for me to click mouse to draw a line. Also, hitting the space bar again does nothing.
View 9 Replies View RelatedI have autocad 2011 and commands not working. I reinstall autocad but command not working.
View 2 Replies View RelatedMy Client save AutoCAD 2012 file into AutoCAD 2002. Now he is facing a problem that whenever he is working on that file some commands in AutoCAD 2007 like Extend and Trim is not working on existing lines and X-ref lines. And when i open that file into AutoCAD 2012 and 2013 then all commands are working.
when he create new line and try to use these commands then all commands are working but when he try these commands on existing lines and X-ref then commands are not working.
I am having problems with the selection commands,
Ctrl + A
Deselect all as they seem to be unknown commands? (Quick select in properties does work) I have loaded my own profile (but have used the default profile aswell to check, still no joy)
If I am working in Autocad classic workspace and i will switch my workspace in 3d modelling, all the command (interface) that i brought inside the workspace will lost. How to prevent that?is there an option for this??
View 3 Replies View RelatedI have acad 13 installed on an asus laptop. I wanted to do some serious work last night so I plugged in the mouse to the usb port. Doing my usual quick clicking, anytime i was "inside the dwg" like say select or pick a point on the screen, i needed a second pick to do anything. Same with rt click for return. picking a menu item or dropdown or button works fine, "outside the dwg".
Noticed that a slow deliberate click seems to work.I reloaded the asus mouse driver, no dice.I took a 10 year logitech old mouse out, same problem.This problem does not occur using the pointing/click device built into the laptop.Is there something that is looking at the duration of my click in acad? in asus computer ?
We are working in AutoCAD 2010 and the keyboard shortcut commands are not working for one of our users. we are having difficulty getting it back online for her. we tried a menu load for the acad.pgp file and it isn't working .
View 2 Replies View RelatedI am new to Autocad, Everything was working fine until now...I can access a command via command line or menu or toolbar just fine, but although the command line prompts are working, the model space is not showing my lines, circles, rectangles etc. Nothing new is appearing on my model space. I am not sure what I accidentally changed. This is only true in this particular file, my other files are working fine.
View 1 Replies View RelatedI am using short cut keys for commands and recently commands are not working right.
'Ctrl + 1' is copy so if i have something selected it will go directly in to the copy command and allow me to pick a point.
but now its doing this.
Command:
Command:
Command: _copy
witch makes me think its hitting enter twice that deselects what i had selected.
the macro in cui is as follows
$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP ),_copy,^C^C_copy)
is their some command set so it will stop doing that double enter? it just started doing it today. I have closed out autocad, restarted, made sure a key isn't stuck on my keyboard.
How to the fix the little buttons (icons) on the tool palette(s)?
Sometimes, by mistake, I drag an (or many) icon(s) to another place. I work with autocad 2010.
AutoCAD Map 2010 has just been installed in my PC and since i first runned AC the command line, menu browser and key commands don´t work. This way I can´t do anything.
View 4 Replies View RelatedI have loaded the Express Tools as here [URL] .... says. The Express Tools appear in my menu bar like normal, but when i try to do anything with any of them —FLATTEN, for instance— autocad does not recognize any.
I am running on Windows 8, Autocad Student Version language Spanish.
I'm setting up some custom toolbars and that's no problem, but what I'd like to do is have one of the buttons be a toggle, so the icon changes depending on what state it is in. I'm just having a bit of trouble figuring out how I find those buttons programatically from within C#. I've included Autodesk.Autocad.Customization which gives me the Toolbar, Tool bar button, etc classes, but I don't know how to find the existing toolbars from the running session of AutoCAD.
View 9 Replies View RelatedI mad e the mistake of creating my corridors for a large site in the same drawing, and now I would like to pull them apart into individual drawing files for each corridor. I thought that last time I tried it, the drawings or data somehow got corrupted. I am running C3D 2009.
View 1 Replies View RelatedAuto cad 2006 and 2012; after loading commands from tool pallet The keyboard function Ctrl+Z function is not working.This error is happening all computers.
View 6 Replies View RelatedI need the image to ALWAYS be on the bottom, but as I draw things sometimes, for no rhyme or reason, it draws it underneath the image and i have to do draworder again to bring it to the front?
View 4 Replies View RelatedI want to make a block with an attribute. But over the attribute I want to make a hatch. So at the place of the hatch the attribute shouldnt be visible. When I make the block AutoCAD puts the attribute on top. Is there a way that the hatch will be on top?
View 2 Replies View RelatedHow do i get my number buttons working again?
View 3 Replies View Related"Snap to object", "To Front of Page", and "To Back of Page" buttons stopped working.
View 14 Replies View RelatedMy illustrator CS6 short commands have stopped working. Any time I try to use any CMD + Key, illustrator will not react. This has been on going for a few months, I have tried resetting preferences but nothing has changed.
View 6 Replies View RelatedI'm having some problems using some existing MX highway design data I've brought into Civil3D using the genio import extension. Basically I can bring in all the alignments that I want to be able to use but am unsure where to go next in terms of creating a proposed profile line. My goal is to be able to pull out long sections and cross sections based on this data. Ideally I'd like to avoid doubling up on work in MX and Civil3D as much as possible.
View 2 Replies View RelatedI'm trying to hide an object behind another without hatching it. Is this possible using AutoCAD LT 2012?
If hatching is required to hide an object than how do I not print the object in b&w without the hatching?
I am creating a new block that includes text, lines and a solid object. The block is creating properly, however, the linework is behind the solid object.
How do I control the draworder of the items in the block?
Is there a way to set the order before I create the block, OR do I have to modify the block after I have created it?
I cannot seem to add the pen tool button.
I know there is a general way to do this but it seems to elude me at the moment. I go to the button palette and can use the tool from there but would prefer that is was on the side bar.