If I am working in Autocad classic workspace and i will switch my workspace in 3d modelling, all the command (interface) that i brought inside the workspace will lost. How to prevent that?is there an option for this??
View 3 RepliesI can't see the area where I write commands any more, may be a configuration thing because never happened to me before.
View 2 Replies View RelatedI create 9 Premiere projects, each under a root directory (proj/p1;proj/p2;proj/p3;etc.).
As I was working on my videos I was capturing screen shots of the video and using them on different layers. that is, I would be in proj/p2 and I woud capture screen shots to proj/p2/assets. The problem is that sometimes I would forget to change the capture directory and I would be in proj/p3 and I'd capture the image to proj/p2. I did that a lot.
So, I changed to a different computer that had a different real path to proj and now, all the images I did the "cross capture" incorrectly don't show up. When I try to do a "reattach" the file that is showing not found, it does not actually attach it. I have to re-add it to my project and surgically replace the new file on the time line (very painful and slow).
When I try typing "L" for line and hit enter (space bar), then click the mouse to draw a line nothing happens. The command is active and the grips are active like the command is ready for me to click mouse to draw a line. Also, hitting the space bar again does nothing.
View 9 Replies View RelatedI have autocad 2011 and commands not working. I reinstall autocad but command not working.
View 2 Replies View RelatedJust had to repair my installation, now I am unable to use any Civil 3D commands, anything with "AECC" in front of it is coming back with "unknown command"?
View 1 Replies View RelatedMy Client save AutoCAD 2012 file into AutoCAD 2002. Now he is facing a problem that whenever he is working on that file some commands in AutoCAD 2007 like Extend and Trim is not working on existing lines and X-ref lines. And when i open that file into AutoCAD 2012 and 2013 then all commands are working.
when he create new line and try to use these commands then all commands are working but when he try these commands on existing lines and X-ref then commands are not working.
I am having problems with the selection commands,
Ctrl + A
Deselect all as they seem to be unknown commands? (Quick select in properties does work) I have loaded my own profile (but have used the default profile aswell to check, still no joy)
I've just installed Maya 2013 and when i try to run hypershade i get this message: line 631: Designated Work Area graph tab not found!
View 1 Replies View RelatedWe have lost the use of the two transparent commands 'spe and 'sse. When I either click on the toolbar or type 'spe or '_spe in the middle of a command, they don't work like the other transparent commands. When I click on toolbar by itself, I get an error "Unknown comment "SPE". The other transparent commands say something like "PSE must be called from within another command".
Also, is the actual comment 'spe the command name or is it an alias. I was thinking that if I knew the command name, I could create another allias as a work around.
This is happening on multiple computers.
We are working in AutoCAD 2010 and the keyboard shortcut commands are not working for one of our users. we are having difficulty getting it back online for her. we tried a menu load for the acad.pgp file and it isn't working .
View 2 Replies View RelatedI am new to Autocad, Everything was working fine until now...I can access a command via command line or menu or toolbar just fine, but although the command line prompts are working, the model space is not showing my lines, circles, rectangles etc. Nothing new is appearing on my model space. I am not sure what I accidentally changed. This is only true in this particular file, my other files are working fine.
View 1 Replies View RelatedI am using short cut keys for commands and recently commands are not working right.
'Ctrl + 1' is copy so if i have something selected it will go directly in to the copy command and allow me to pick a point.
but now its doing this.
Command:
Command:
Command: _copy
witch makes me think its hitting enter twice that deselects what i had selected.
the macro in cui is as follows
$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP ),_copy,^C^C_copy)
is their some command set so it will stop doing that double enter? it just started doing it today. I have closed out autocad, restarted, made sure a key isn't stuck on my keyboard.
AutoCAD Map 2010 has just been installed in my PC and since i first runned AC the command line, menu browser and key commands don´t work. This way I can´t do anything.
View 4 Replies View RelatedI have loaded the Express Tools as here [URL] .... says. The Express Tools appear in my menu bar like normal, but when i try to do anything with any of them —FLATTEN, for instance— autocad does not recognize any.
I am running on Windows 8, Autocad Student Version language Spanish.
In the process of releasing 2013 to the office. We have about 60 machines being loaded, varying from 64-bit Win 7, 32-bit Win 7 and 32-bit Win XP. I have gone through and created new PC3 files for our two KIP printers (3000 & 7000 series). I added one custom page size to each to create a PMP that goes along with them. These files have been placed onto a network folder for all users to access. This is where my confusion begins.
When other users go to utilize these files it is giving an error stating that "the plotter configuration cannot be found, driver cannot be found, device cannot be found, yada yada. The none has been substituted."
So we began to look at the PC3 files and see what the issues are. When the same file on the Server is copied down to a local machine it changes back to a KIP10 driver down from a KIP11 driver on the network. Make Sense?
In order to fix I began running the "Add-A-Plotter Wizard" on the local machine. Created a new PC3 wiih a different name and went back into the program. Now the PC3's that did not work before WORK.
In short, since the 2013 version has a new file format do we have to run the "Add-A-Plotter Wizard" on all local machines before the standard PC3 file will work effectively? Or does having 2011 version still on the machines have an effect on these files?
Win 7 Pro 64-Bit - Dell T1600
Intel Xeon 3.30Ghz
8Gb RAM
Civil 3D 2013
My draworder tool bar buttons and pull down commands are not working. I click on them and get
Command: Unknown command "AI_DRAWORDER". Press F1 for help.
Command: Unknown command "FRONT". Press F1 for help.
This is the same issue for all of the draworder commands.
If I type draworder in the commande line I can get it to work. How do I restore my tool bar commands to get them to work?
My illustrator CS6 short commands have stopped working. Any time I try to use any CMD + Key, illustrator will not react. This has been on going for a few months, I have tried resetting preferences but nothing has changed.
View 6 Replies View RelatedMost of my Command Line Commands have stopped working !!! I noticed when I wanted to mirror/flip an object, I could not get those Command Line commands to "expand". When I tried other Command Line commands under "Image", "Effects", etc, most of these would not work either.
View 12 Replies View RelatedFound that in certain drawings, the measure area tool will just suddenly stop working? It's very odd. It let's me pick points, but won't let me press enter to see the total.
Closing and reopening AutoCAD doesn't work. It seems to be a permanent thing to the affected drawing.
It's happened to me in a few drawings, but only in those specific ones. Other drawings are fine. I'm guessing it's a setting I've changed somehow?
I've been getting round it by creating shapes using the polyline, and then looking at the area in the properties window. It's an ok solution, but not ideal.
Working in 2013 Raster Design. The commands for raster tools are not working. When attempting to insert an image the following message appears:
c:program filesautodeskautocad raster design 2013aeciibui56.arx cannot find a dll or other file that it needs. Unknown command "IINSERT". Press F1 for help.
Similar messages appear when trying other commands located within the Raster Tools tab.
1, the commands DO work if the text is confined to just ONE page, even if there are multiple linked text frames.
2, it's only the Copy command that doesn't work. Once copied, text does paste irrespective of the amount of text or linked pages.
And do I have to wait for 6.3 to get a resolution ? On Win 7, 64 bit
how do you type in a specific area? i dragged my cursor and formed a square but when i type, it appears out of that square. i'm using ps cs6
View 2 Replies View RelatedI have a simple scene. Cylinder with Target Photometric light casting toward it. Plane.
the nitrous viewport creates correct soft shadow adjustments as I change the width and height of a rectangular light source. the render does NOT.
I would like to change the Dark color working area for a lighter one such as grey used in old Paint Shop 6 or 7.
View 2 Replies View RelatedDepth of Field works but select area to clear does not?
View 4 Replies View RelatedI installed express tools with ACADE abd ACAD, some of them don't work, example:
_.sysvdlg Unknown command "SYSVDLG". Press F1 for help.
other commands missing:
arctextx, txt2mtxt,mocoro,dimex,dimin,qlattach
I've recently migrated from AutoCAD 2008 (non-industry specific) to AutoCAD 2010 so I don't know if this was an issue in 2009.
Back in 2008, when I choose the 'window' option when specifying a plot area, AutoCAD would show the workspace so that I could manually select a windowed plot area, and at the same time the whole workspace would be greyed out except the previously active window area.
This was handy, because we can have as many two dozen title-blocks (and therefore separate viewports) in paperspace, and knowing what plot area I last plotted or added as a saved page setup.
In 2010, it no longer does that. I now have to rely on the dashed border to know where the active plot area is/was (checked 'display printable area' in options>display tab) which I personally don't really like using.
How to changes the settings for the "Square Area" in mapcheck's closure summary. When I right-click the dwg name in the Settings tab of Toolspace and choose Edit Drawing Settings, then Ambient Settings, I see the Area settings, but in the closure summary, there is also "Square Area". Why are these both there? It WOULD be nice to show sq. ft. as well as acres, but I can't find anywhere to edit it.
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
I want to know if there is an easier ACAD solution for drawing. In the given triangle of ABC (sides and angels are known) I want to draw line CM so that the area of BCM becomes 2000 cm (are of ABC is 5311.7 cm3).
Is there an easy ACAD way for drawing this line without using trigonometry for calculation?
I need to determine whether an area intersects with another area.The left case can be easily determined by Polyline.IntersectWith(Polyline...).But in the right case, the two polygons intersect/overlap each other while polylines do not intersect.
What would be the efficient way to determine the right case polygons are intersecting polygons?