AutoCAD Architecture :: Can't See Area Where Write Commands
Feb 12, 2011I can't see the area where I write commands any more, may be a configuration thing because never happened to me before.
View 2 Replies
ADVERTISEMENT
AutoCad :: Commands Found In Working Area
Apr 3, 2012If I am working in Autocad classic workspace and i will switch my workspace in 3d modelling, all the command (interface) that i brought inside the workspace will lost. How to prevent that?is there an option for this??
View 3 Replies View RelatedAutoCAD Architecture :: Commands Won't Work On 2010 64 Bit?
May 6, 2009I've just installed ACA 2010 on my laptop on Windows XP64 bit
When I select a command such as the wall or door command. The command starts then exits out before I can draw anything.
AutoCAD Architecture :: Profile Does Not Load AEC Commands
Oct 22, 2010We have AutoCAD Architecture 2011. By default, our profile does not load the AEC commands. I am looking for a way to enable them in session. Short of this I am looking for what controls them.
We have a custom CUI that loads, it was created from the default AutoCAD one. If I switch to the AutoCAD Architecture profile while in AutoCAD the AEC commands do not become active. If I launch AutoCAD from a shortcut that specifies AutoCAD Architecture profile then the AEC commands do load. I have tried loading the AECARCHXOE cui as a partial CUI in our custom CUI but that does not load the ARC commands (either in session or as a new session)
what controls weather the AEC commands load?
AutoCAD Architecture :: 2011 Freezes On Commands
Apr 29, 2011When I give keyboard commands to open, save or save as the program freezes. Pulldown menu to open and save work fine but pulldown save as freezes and freezes when using commands on "A". Happening in 2009 also. Same thing happened yesterday, repair did not fix it, so uninstalled and reinstalled and all was fine. Now today freezing again.
Had a blue screen message yesterday when I turned on the computer, bad spooler something. Are these problems related or just a coincidence? Using Windows XP. Autocad is up to date as is Windows.
AutoCAD Architecture :: Unable To Use Pull Down Menu Commands
Jul 6, 2011I am unable to use pull down menu commands, for example when I want to save as, I have to type it manually in the command menu...to open a file I have to type the file name at command line..
when I click save as or any other command from the pull down menu, it does not work, the command line apprars at the buttom of the drawing asking me to manually make an imput...
AutoCAD Architecture :: 2012 Stopped Recognizing Commands
Apr 3, 2013I am using autocad Architecture 2012. the other day it randomly stopped recognizing most commands. I cannot TRIM, CO, OFFSET, ect. all of the main ones. a couple things still work, If I need to draw a circle I can type D and still input diameter. But for all of the rest of those it says "Unknown Command, press f1 for help."
View 3 Replies View RelatedAutoCAD Architecture :: 2013 Express Tools Missing Commands
May 6, 2013finally I got my express tools ribbon but a lot of commands are missing....REDIR for example....
Don't tell me to reinstall AutoCAD Architcture because I already did it twice!
Don't tell my to select the acetmain.cuix by CUILOAD...because..
I also tried the menuload and the appload command but won't load every single lisp routine
from the express folder...can you imagine how many lisp routines the Express Folder has....
AutoCAD Architecture hasn't got such problems with Express Tools.....
AutoCAD Architecture :: Schedule With Area And Perimeter
Mar 4, 2011The architect has a schedule set up that will schedule his room numbers and names. He draws spaces for each room.
I want to add perimeter and area to this. I copied this room schedule in the tool pallete, renamed it with "trial", added columns for perimeter and area, BUT STILL GET ? FOR VALUES!
I've looked everywhere and it should work. When I look at "properties" of the space it shows area and perimeter, but I can't figure out how to extract the info.
AutoCAD Architecture :: Room Area Calculations
Aug 11, 2013Any routine or tool that simplifies calculating and labeling floor areas?
Currently, I draw a polyline around the desired area, list it to get the square footage and then create a text line and type in the square footage. This method takes multiple steps and is easy to mistype the area.
I would love a simple tool that would let you draw a polyline and automatically label it for you.
AutoCAD Architecture :: Fixed Area Rectangle
Dec 27, 2012I would like to draw a rectangle of a certain size (150 s.f.) then stretch it from a corner but have it automatically adjust to maintain the size desired. So I would start with a 10 x 15 shape, then have ability to stretch to 12.5' x ? and as I stretch say the 10' width toward 12.5' the other end of rectangle (15) reduces to 12.
View 4 Replies View RelatedAutoCAD Architecture :: Printable Area In Layout
Mar 16, 2011When I make a new Layout a new Page Setup called *Layout1* is created and assigned to the new Layout. Our plotter is assigned as the plot device, and a dashed rectangle showing printable area appears near the borders of the white sheet area represented in the Layout.
If I choose to Modify the layout, and I change the Paper size, the dashed rectangle disappears, and now I don't know how to position and size a title block to ensure that it stays within the printable area. What controls the presence of the dashed print area rectangle?
AutoCAD Architecture :: Area Schedule Grouping
Oct 20, 2013Is subtotaling still impossible with ACA 2014?
Is there a workaround to what I am trying to do? I just want to create a table that has a list of all the spaces sorted by name, give a quantity of the spaces and the combined area of all those spaces in one row of the table.
Roughly:
King 4 2000sf
Queen 2 1000sf
Suite 4 3000sf
My attached schedule gives a row for each space, except that it groups spaces of exact same areas. I want a single row for each room type.
Also, when working with spaces sometimes using Space_Add, Generate I am met with the response that a space already exists and no space can be added. The "phantom" space does not show up in the schedule, thawing all layers does not reveal any space and I've tried all my selection tricks to parse a space from the closed boundary that appears empty.
AutoCAD Architecture :: Hatch Rotated Area - Alignment
May 10, 2011Not sure if this is possible, but a coworker said he remembers doing something like this. I want to hatch an area that has been rotated. But without knowing what the angle, is it possible to hatch the rotated area so the hatch is orthogonal? I've attached a pdf to show what I want.
View 5 Replies View RelatedAutoCAD Architecture :: Details In Drawing Area Invisible?
Jan 8, 2014I am having a problem with AutoCad Architecture 2014 on my Mac Pro running Parallels and Windows XP.
The crosshair, grid lines,and actual drawing do not show up on my work space, either Model or Paper. When I installed the software two days ago, the software was working properly. I could see what I was supposed to on the drawing space. Something happened that has caused those items to disappear. I have uninstalled and reinstalled the software two or three times but continue to have the problem. Since I am new to ACA, there is likely a setting that I have overlooked or accidentally changed.
AutoCAD Architecture :: Editing Hatched Area Panel Appears
Jan 18, 2012When initiating the hatch command H at the command line my panel changed to the hatch panel. Now the command opens the more traditional hatch dialog. I don't how it happened, but just when i was getting used to the panel.
When editing a hatched area the panel appears. Why when I stretch some hatched geometry does not the adjacent hatch stretch with it?
AutoCAD Architecture :: Associative Spaces And Usable Area Boundaries
Oct 18, 2012We work in space management and deal with associative spaces every day. As a platform we use ACA 2012, with out own Add-on tool (whch simply groups ACA's own tools in one).
We have issues on a daily-basis with the usable boundaries of associative spaces (the green line indicated in the example attachment). Generally when a floorplan is simple, consisting mainly of 90-degree angles wall intersections, everything works fine. However when we work with floorplans consisting of arched, or even more often slanted walls or walls that meet at different angles, the usable boundaries' lines tend to create a "spike" (labled B. on the attachment) which extends outward from the plan, thus creating i.e a 28m2 space out of a 13m2 space (labled A). We use our own calculation standard, however using BOMA or SIS the issue occurs in the same manner, using SIS its even worse.
Generally we solve these issues by changing wall justifications, deleting and re-creating spaces, etc, etc. This can be a very tedious process, one which takes a long time and time is of the essence!
We are aware that by making the spaces non-associative, we can then manually edit the usable boundary, however this is not an option as we handle a great deal of different floorplans each day, and these plans are updated frequently, so we do not want to send out a drawing which has a problem like this because the next person who edits some of the spaces will most likely come across the same problem again.
AutoCAD Architecture :: ERROR Could Not Generate Sash Area From Window Section Profile
Nov 21, 2013This repeats around 100 times in the command line when adding view port to a sheet. "ERROR: Could not generate sash area from window section profile. I'm using ACA 2013 on windows7 64bit. I've tried purging and audit but still happens. It wouldn't bother me except its taking for ever to wait for them to stop running in command line.
View 4 Replies View RelatedAutoCAD Architecture :: Make Getfiled Dialog Box Taller To Include More Of File Selection Area?
Dec 13, 2012How to make the Getfiled dialog box taller to include more of the file selection area? Where to change number of lines displayed. The code is not in the Acad.dcl
Like the Acad.dcl one can edit the width of edit text window: See edit_width = 80;
acad_txtedit : dialog {
label = "Edit Text";
initial_focus = "text_edit";
[Code]....
AutoCAD 2010 :: Choosing A Plot Area - Non-active Area No Longer Grayed Out
Apr 6, 2009I've recently migrated from AutoCAD 2008 (non-industry specific) to AutoCAD 2010 so I don't know if this was an issue in 2009.
Back in 2008, when I choose the 'window' option when specifying a plot area, AutoCAD would show the workspace so that I could manually select a windowed plot area, and at the same time the whole workspace would be greyed out except the previously active window area.
This was handy, because we can have as many two dozen title-blocks (and therefore separate viewports) in paperspace, and knowing what plot area I last plotted or added as a saved page setup.
In 2010, it no longer does that. I now have to rely on the dashed border to know where the active plot area is/was (checked 'display printable area' in options>display tab) which I personally don't really like using.
AutoCAD Civil 3D :: Area / Square Area In Closure Summary Of Mapcheck
Oct 23, 2012How to changes the settings for the "Square Area" in mapcheck's closure summary. When I right-click the dwg name in the Settings tab of Toolspace and choose Edit Drawing Settings, then Ambient Settings, I see the Area settings, but in the closure summary, there is also "Square Area". Why are these both there? It WOULD be nice to show sq. ft. as well as acres, but I can't find anywhere to edit it.
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
AutoCad :: How To Draw Line Based On Area Of Encircles Area
Oct 12, 2011I want to know if there is an easier ACAD solution for drawing. In the given triangle of ABC (sides and angels are known) I want to draw line CM so that the area of BCM becomes 2000 cm (are of ABC is 5311.7 cm3).
Is there an easy ACAD way for drawing this line without using trigonometry for calculation?
AutoCAD .NET :: Efficient Way To Determine Whether Area Intersecting Another Area?
Apr 14, 2013I need to determine whether an area intersects with another area.The left case can be easily determined by Polyline.IntersectWith(Polyline...).But in the right case, the two polygons intersect/overlap each other while polylines do not intersect.
What would be the efficient way to determine the right case polygons are intersecting polygons?
Paint.NET :: Select Area Within JPEG Image To Blur That Selected Area?
Sep 19, 2011Photo editing. How do I select an area within a .jpeg image so I can blur that selected area?
View 2 Replies View RelatedRevit :: Area Takeoff Of Only Selected Faces (red Area)?
Sep 19, 2012See attached file.
How can you do the area takeoff of only the selected faces (red area)?
Right now I have to use the 3rd party software to do something like this. I'm curious if there's a way to do inside Revit?
Illustrator :: Area Type Tool Will Not Draw Area
Sep 9, 2013After selecting the area type tool, I try to click and drag but I get an error message: You must click on a non-compound, non-masking path to create text inside a path. This worked before but I must have screwed something up.
View 3 Replies View RelatedAutoCAD .NET :: Why Cannot Write The XRecord
Jul 30, 2011Why the xrecord not save?
public static void SaveInscCad(ObjectId idEnt, string InscCad) {
Database db = AcadAppServices.Application.DocumentManager.MdiActiveDocument.Database;
using (Transaction tr = db.TransactionManager.StartTransaction())
[Code] ....
AutoCad :: Write 3D Text On Arc
Oct 29, 2012I am trying to design a key chain, and I would like to write a 3D text on an arc. Is there a solution to that chalenge, other than drawing every letter with a polyline and then press pulling it?
I am working in ACad 2008.
AutoCAD VB :: Autodesk - Can't Write Anything Into Textbox
Jun 13, 2011i have a Problem with my Autodesk CAD 2012 version. I wanted to write a VBA-Skript, but then there comes up a problem i cant solve and i don't know if it's a CAD or a VBA problem. When i make a Userform with a Textbox and run the program i can't write anything into the Textbox. I have the impression the program jumps always from cad to vba and back.I tried it then in excel and in the Microsoft Visual Basic 2010 and there it was no problem.
View 2 Replies View RelatedAutoCAD .NET :: Read And Write On Excel?
Mar 28, 2013I want to save and update my form on d:hsezenn.xls.
but when I try this. ı have same eror.
how can I save and update my data on d:hsezenn.xls ?
AutoCad :: How To Write Greek Letters
Jul 20, 2007How can i write greek letter's in the autocad 2005? like alfa, beta....
View 3 Replies View Related