Not sure if this is possible, but a coworker said he remembers doing something like this. I want to hatch an area that has been rotated. But without knowing what the angle, is it possible to hatch the rotated area so the hatch is orthogonal? I've attached a pdf to show what I want.
View 5 RepliesI have many Hatch pattern in my dwg. is there any LISP if i slect any Hatch then it will give me area in table
View 5 Replies View RelatedHow can it be that a hatch object has no area property? Using the AREA command, it says the object has no area.
None shown in properties.
None listed using vlisp (vla-get-Area Obj).
I have seen this before, but why or how it happens.
I have a hatched region that clearly has an area, however the geometry properties indicate that there is no area associated. This a a complex region with many PI's. I really don't want to recreate this area.
Is there any way I can create a boundary around the hatch lines?
im trying to hatch a area inside a box but every time i try it says that there are gaps but they are within tolerance and give me OK or NO
if i select OK it hatches one i want and one beside it and the boundary it creates is all messed up
if i select NO nothing happens
ive tried to find out how to identify the gaps and ill ive found is to look for the red circles.. mine dont seem to display is there anyway to turn them on? or another way to show the gaps i have so i can close them i always draw with snap on
Essentially, I have an odd shape that I fill in with a hatching. SOMETIMES, it will give me the area in the properties window (or when I use the list command). but other times, it will not give me the area.
I just hatched 4 different (but same general shape) areas, and on 3 of them CAD was able to compute the area, but not the 4th hatched area.
I created all 4 hatches using the exact same steps, so I'm not sure what I could be doing wrong. The CAD Tech at the office cant seem to figure it out either .
When creating text in model space it appears both mirrored and rotated 90 degrees to the horizontal. However, when I create text in paper space it is fine. I have tried looking at the properties for the text but although I can find a place to rotate the text back to the horizontal it is still mirrored and therefore unreadable.
When I copy paste stuff from one document to another this also occurs.
I'm having a problem here with hatching in AutoCAD 2000. The existing hatch patterns doesn't fulfill my needs and I need something more specific to hatch a cobble stone area. In my aCAD hatch patterns there's not a good hatch for it and I looked that I can do my own pattern using Notepad etc. but unfortunately I don't have a time to do that.
So, my question is: Is there any simple ways to create your own hatch patterns for example like in Microstation where it is very easy to do. There is an option that I can use cells (blocks in ACAD) as hatch patterns.
Or can I maybe download a custom *.pat file from somewhere and use it?
When I was using AutoCad 2010 I could HATCH within a cube, circle or within any object that was joined together even if it had text in it would HATCH within the boundaries of the area to be hatched. Now that I use AutoCad 2013 this option does not work as if there is text in the object only a partial area will become hatched. This means I have to MOVE the cube or whatever shape to a place where there is no text inside it, HATCH and then move it back to where I wanted it in the first place.
View 1 Replies View RelatedI find conflict area between list command for hatch and calculation.
when do you make calculation list of plines 2381.399
when do you make calculation list of hatch 2545.948
Basically for example (to make this easy to understand) I've got 4 squares with hatches inside and im trying to select one single hatched area in one of the squares (and delete it). But upon selecting it it's selecting the hatches in the other 3 squares (as they were added at the same time). I've carried out a few searches in google etc and experimented with "pickstyle" but with no avail, also I've looked at groups but there are none in the drawing(so I can't ungroup).
I can do it (which I've just realised) by deselecting the boundaries in "edit hatch" but just wondered if there was a quicker way?
How to calculate the AREA of cut and fill analogous to the volume of cut and fill between surfaces, but instead only between the alignment and the road profile in the prolfile view. From what I've read of similar posts a few people have had the same question but have been instructed how to do it with volumes as opposed to area. Also how to insert a table of cut and fill area analogous to the one you can inset from the volumes dashboard.
View 5 Replies View RelatedI need to add a hatch fill polyline area but leave the text island out. What I did is put put Polyline ID and Text island ID into an ObjectIDCollection. The code doesn't throw any error but I can't see the hatch.
Public Function AutoCADAddHatch(ByRef newAddedHatch As Hatch, ByRef HatchElementIDs As ObjectIdCollection, ByVal HatchColour As Autodesk.AutoCAD.Colors.Color,
_ ByVal HatchLayerName As String, Optional ByVal PatternName As String = "SOLID", Optional ByRef strError As String = "") As Boolean
Dim db As Database = acApp.DocumentManager.MdiActiveDocument.Database
[Code] ......
Hatch objects: Note To access this property, use the IAcadHatch2 interface.How can I access the Object.Area of an AutoCAD hatch. AutoCAD 2006 has properties that can be assigned to Fields so why can't I find the object att- area in any lisp vars?
View 7 Replies View RelatedIs it possible to fill an area with hatch patterns in a feature sketch (ipt sketch), not in idw sketch?
I want to show a safety screen (wire mesh) in a 3D model, in order to reduce the file size, I do not want to do solid wire mesh in the model, but the sketch only. I was drawing one by one line and make a hatch cross lines in the sketch, it took me lots of time to draw these lines.
I've been trying to calculate large areas using fills but I keep encountering a problem with some of the hatches not showing an area and thus ruining my calculation. I've found out that I can correct it by removing certain crossing point between lines as is shown below in my screenshots. Is there any reason this is causing a particular problem and can I avoid it to save me having to go back over my hatches checking for these malformed hatches?
area.jpg
altered.jpg
I work with maps, and i hatched a area, with a irregular shape, now i want to know this area, how can i proceed?? I already selected all area and clicked on properties to see Geometry information, acumulative... Did the List Comand.. and nothing.
View 9 Replies View Relatedi have problem with hatch,if i delete any lines from related hatch protion object area, my all related hatch object erased.pls guide me how to solve problem.
View 6 Replies View RelatedI have several days of experience with Autocad 2010... The problem: I have many (a lot) polylines in my 2D drawing that are adjacent to each other, but not joined. What is a good way of joining them, so that those that "touch" each other become one? Maybe I can hatch the area, then delete polylines and then reconstruct the boundary?
View 9 Replies View RelatedMy application has suddenly started to link the hatch pattern to the area boundaries.
The objects remain on their own layers, but I am not able to delete the hatch pattern without deleting the boundaries.
I cannot edit the hatch pattern either as the application no longer recognises the hatch pattern.
Have i changed a setting unwittingly?
I am using AutoCAD Architecture 2012. While using the hatch command, the contextual tab pulled up in the ribbon as expected. But when I went to pick an internal point AutoCAD froze. After closing ACAD and trying to open the drawing again it asked me to recover the drawing because of errors. After recovering the drawing the ribbon still had the contextual hatch tab in it although if you try and hatch ACAD will freeze again.
So as it sits now, no matter how many times you open or close the drawing the contextual hatch tab will not go away and is not functional. If you try and hatch the drawing crashes. I have duplicated the problem on multiple computers so I know its not a problem with my computer as much as it is a problem with this particular drawing.
My hatch shows up in blue when in mspace. when in pspace, the hatch disappears.
View 1 Replies View RelatedACA2011
So I've got a Construct that is the building model. I also have a View file for my 2D extracted elevations. I've just 'Refreshed' one of the elvations based on some updates I did to the construct model. But when the 2D elevation refreshed, it's surface hatching (roof tiles) scaled itself down considerably. What controls this? I need to have that hatching scale back up and don't know how.
I have created hatch in the same drawing but some hatch appears denser than other hatch yet they are all the same type of hatch, scale etc
I have changed the measurement variable from 0 - 1 but no luck
I would like to know how i can find the good scale for hatch. Is there an other mean to find by aleatory ?
View 4 Replies View RelatedI am using Autocad 2013 , and i have download many more hatch pattern from web , But i haven't know how to apply this hatch pattern in autocad 2013 .
View 1 Replies View RelatedI have a viewport that is not showing the hatch pattern. In one layout tab, the hatch shows. In another tab, the hatch does not. The layer is not frozen or off, on the sheet or in the viewport.
Other items and hatch patterns on that same layer show up. The display is set to 2D wireframe. I even cut - paste a viewport from the working layout tab to the non-working layout tab and the pattern disappears.
The hatch appears correct on the screen, but when printing there are voids created on the printout. These voids appear in different areas for each print. Our plotter is HPT790, that has all the software updates.
View 1 Replies View RelatedI have Autocad Architecture 2014 installed on my office PC and Laptop.A drawing with a hatch pattern set to a scale of 1 on my laptop needs to be changed to a scale of 25.4 to look the same on my PC. Both versions of ACA are US metric.
View 3 Replies View RelatedI have new hatchs(extension PAT) patterns and want to put the in my autocad architecture 2010, I can't find where to paste them.
View 1 Replies View RelatedIn architecture 2012, I'm trying to get the Hatch Pattern Dialog Box to come up to see if I have custom hatch patterns loaded.
They do not show up in the drop down menu in Hatch Creations.
How do I get the Hatch Pattern Dialog Box to come up?