AutoCAD Architecture :: Hatch Does Not Appear In Pspace
Jun 12, 2013My hatch shows up in blue when in mspace. when in pspace, the hatch disappears.
View 1 RepliesMy hatch shows up in blue when in mspace. when in pspace, the hatch disappears.
View 1 RepliesI seem to have a problem with having my text view the same in both mspace and pspace! What I see when I am in Model space is the acad default text: txt in Paper Space it appears as it should as Romans. This is specific to my workstation BTW, when I open the dwg file on a colleagues PC it opens Romans in both Model and Paper space.
View 9 Replies View RelatedI have a file with an x-ref. The x-ref drawing colours are changed and the objects colours are set to bylayer. I am trying to make a point of my drawing darker than the rest and the other areas just faded grey. I have colours 211-217 set to print at a darker colour and different line weights. For some reason though, even though I have some buildings in my drawing set to 214, it is still coming out cyan in my current drawing.
View 4 Replies View RelatedI am using AutoCAD Architecture 2012. While using the hatch command, the contextual tab pulled up in the ribbon as expected. But when I went to pick an internal point AutoCAD froze. After closing ACAD and trying to open the drawing again it asked me to recover the drawing because of errors. After recovering the drawing the ribbon still had the contextual hatch tab in it although if you try and hatch ACAD will freeze again.
So as it sits now, no matter how many times you open or close the drawing the contextual hatch tab will not go away and is not functional. If you try and hatch the drawing crashes. I have duplicated the problem on multiple computers so I know its not a problem with my computer as much as it is a problem with this particular drawing.
ACA2011
So I've got a Construct that is the building model. I also have a View file for my 2D extracted elevations. I've just 'Refreshed' one of the elvations based on some updates I did to the construct model. But when the 2D elevation refreshed, it's surface hatching (roof tiles) scaled itself down considerably. What controls this? I need to have that hatching scale back up and don't know how.
I have created hatch in the same drawing but some hatch appears denser than other hatch yet they are all the same type of hatch, scale etc
I have changed the measurement variable from 0 - 1 but no luck
I would like to know how i can find the good scale for hatch. Is there an other mean to find by aleatory ?
View 4 Replies View RelatedI am using Autocad 2013 , and i have download many more hatch pattern from web , But i haven't know how to apply this hatch pattern in autocad 2013 .
View 1 Replies View RelatedI have a viewport that is not showing the hatch pattern. In one layout tab, the hatch shows. In another tab, the hatch does not. The layer is not frozen or off, on the sheet or in the viewport.
Other items and hatch patterns on that same layer show up. The display is set to 2D wireframe. I even cut - paste a viewport from the working layout tab to the non-working layout tab and the pattern disappears.
The hatch appears correct on the screen, but when printing there are voids created on the printout. These voids appear in different areas for each print. Our plotter is HPT790, that has all the software updates.
View 1 Replies View RelatedI have Autocad Architecture 2014 installed on my office PC and Laptop.A drawing with a hatch pattern set to a scale of 1 on my laptop needs to be changed to a scale of 25.4 to look the same on my PC. Both versions of ACA are US metric.
View 3 Replies View RelatedI have new hatchs(extension PAT) patterns and want to put the in my autocad architecture 2010, I can't find where to paste them.
View 1 Replies View RelatedIn architecture 2012, I'm trying to get the Hatch Pattern Dialog Box to come up to see if I have custom hatch patterns loaded.
They do not show up in the drop down menu in Hatch Creations.
How do I get the Hatch Pattern Dialog Box to come up?
I have a drawing from an architect, and they have used a user defined hatch pattern. But I cannot use it. I can find it's name, it shows up in properties and in the hatch tools. But it isn't in any *.pat files and I can't copy it into my tool palettes. where I could find it, it shows up just fine in the drawing, but I can't figure out how to use it in other areas, not even within the same drawing.
View 1 Replies View RelatedI have a CAD station that is having all sorts of issues all of a sudden. When one of our architects opens her drawings she gets the "Hatch - Large, Dense Hatch Patterns" dialogue box.
When I we choose the "Do not convert these hatch patterns" and open the drawing, it converts all the hatch patterns to solid anyway. This is mostly affecting the walls and converting all the hatch into one solid blob of a hatch.
One weird thing is this only happens in the medium detail display configuration. I can go to any other display and it is fine. The other weird thing is that these same drawings open fine on any other computer so it has to be a system problem.
The other gremlin I solved yesterday was that the system all of a sudden was not recognizing the LTYPESHP.SHX file. I had to add the DataCache support folder containing a ltypeshp.shx file to the support file search path.
I have two created wall styles, one is a stud wall with gyp bd each side, the other is a cmu wall with gyp bd each side. I want to use a solid hatch which I am able to do but the problem is one wall style the stud hatch is HATCH 1 and in the other wall style the CMU hatch is HATCH 2. It seems as though the two wall styles are tied together some how for if I turn on / off a hatch in one of the wall styles it turns on / off the hatch in the other wall style.
View 4 Replies View RelatedAnother little problem off the big list. Up until now i have been using Autocad Architecture 2009 but recently upgraded to 2012. For some reason though, my hatches are now no longer linking on wall corners like the attached drawing shows.
View 2 Replies View RelatedWhen I add the hatch pattern to the tool palette and then try to use it, it defaults the boundaries add command to pick points. Is there a way i can have it default to select objects?
View 1 Replies View RelatedMy ACA 2012 won't let me hatch an AEC polygon, or a space for that matter.
Is that a new feature, or a bug? Or am I missing something.
Not sure if this is possible, but a coworker said he remembers doing something like this. I want to hatch an area that has been rotated. But without knowing what the angle, is it possible to hatch the rotated area so the hatch is orthogonal? I've attached a pdf to show what I want.
View 5 Replies View RelatedI've not done custom hatch patterns in the past, but I'd like to create a custom hatch pattern using a block I have. Is there an easy way to do this?
Would like to make a 8" CMU (section) hatch pattern, as an example, to use in automated sections that I generate.
Pretty easy to see where I'm headed w/ this.
Any easy conversion tool or the ability to explode the block, select everything for a hatch pattern and click "OK".
Likely there isn't, but it never hurts to ask when starting out.
I am using AutoCAD Architecture 2012 and I would like to add a hatch file but all the hatch files are located in the following file C:Program filesAutodeskAutoCAD Architecture 2012ContentPackscp_ADT_UKsupport. Adding a hatch file?
View 2 Replies View RelatedMy Computer just recently jusst got switched to a new server...
Somethings are just acting weird now, like my hatching...
All my old hatches that were associative are acting like one seltions like if i hatch a polyline now when i go to select that hatch it now selects the polyline as well.
This never happened before abd the only way to edit it now is to either make it in the properties not associative then i lose my boundary or just to explode it then i a ihave an exploded hatch...before i made it assoc. and i could just edit or select the hatch only i think its an option setting...
I inserted a design component of a concrete wall and the hatch pattern came in with ansi31 instead of a concrete pattern and it is filled in. I dragged another wall style from tool palette and instead of the conc pattern, I'm getting the ansi31 pattern. Also tried the 3" base course with a gravel pattern and got the same thing.
View 7 Replies View RelatedURL.... I cant set the hatch in quick cross section in the wall. I have installed sp1 for ACA 2013. It nothing change. I'm architect from Poland.I use Autocad Architecture five years.
View 4 Replies View RelatedI am trying to edit the flemish bond hatch pattern. How can I find out what each number is the .pat file represents?
View 3 Replies View RelatedWhen I draw a brick wall in the north-south or west-east direction, the pattern is at 45 degrees, but when I draw a wall at any other angle, the pattern is still at 45 degrees but not relative to the brick wall.
View 2 Replies View RelatedI have a shed roof with a series of beams. The roof has a hatch. In the RCP, how can I show the beams "in front" of the hatch? I've tried changing the view to Hidden, but that gives me the top of the roof, not the underside... Also, many of the floor items (such as kitchen cabinets) are showing.
View 4 Replies View RelatedI'm a bit new to the concepts of point labels in C3D; I browsed around for a bit for a solution and haven't been successful. I'm having troubles with my point label styles in Paperspace - they appear about 25x smaller than in model space, but both are the same scale.
This is my label style setup:
This is how it appears in modelspace:
This is my viewport settings and how it appears in paperspace (zoomed in):
The text height in MS is 2mm, and approx 0.078mm in PS.
I am working on my electrical plan with the floor plan xref'd. I am able to get the entire floorplan to plot lighter using the 25% saturation feature in layers. The walls print ghosted, but the hatch that is on the same layer as the walls stays dark. I tried creating a seperate wall section All layers on the floor plan dwg that are xref'd in are the same in the layers dialog.
View 3 Replies View RelatedTypically when I click on the Set Origin button, all I then have to do is click on the page where I want the hatch origin to be, and everything works just fine.
I work on a shared computer. Start working this morning, and now when I click on the Set Origin button, it prompts me to inform it "SIngle or SUbobject?". And through a number of further selections, I can eventually get around to selecting my origin and having things shift around properly. But that really slows me up. Seems like one of the system variables got changed. I've doodled around a bit online, but haven't been able to find how to get things back to how they used to be.
And I tried opening a new page, restarting the program, etc., and the new way the button works has taken hold. I can't get it to reset. So on my computer (not working properly) when you click on the Set Origin button, the command line says "Command: _-hatchedit select hatch objects..select hatch objects: _S" then it says "ambiguous response, please clarify" "SIngle or SUbobject?"
On the computers that are working properly it only displays the "select hatch objects: _O" and doesn't show the _S part.