I have a hatched region that clearly has an area, however the geometry properties indicate that there is no area associated. This a a complex region with many PI's. I really don't want to recreate this area.
Is there any way I can create a boundary around the hatch lines?
I have many Hatch pattern in my dwg. is there any LISP if i slect any Hatch then it will give me area in table
View 5 Replies View RelatedHow can it be that a hatch object has no area property? Using the AREA command, it says the object has no area.
None shown in properties.
None listed using vlisp (vla-get-Area Obj).
I have seen this before, but why or how it happens.
im trying to hatch a area inside a box but every time i try it says that there are gaps but they are within tolerance and give me OK or NO
if i select OK it hatches one i want and one beside it and the boundary it creates is all messed up
if i select NO nothing happens
ive tried to find out how to identify the gaps and ill ive found is to look for the red circles.. mine dont seem to display is there anyway to turn them on? or another way to show the gaps i have so i can close them i always draw with snap on
Essentially, I have an odd shape that I fill in with a hatching. SOMETIMES, it will give me the area in the properties window (or when I use the list command). but other times, it will not give me the area.
I just hatched 4 different (but same general shape) areas, and on 3 of them CAD was able to compute the area, but not the 4th hatched area.
I created all 4 hatches using the exact same steps, so I'm not sure what I could be doing wrong. The CAD Tech at the office cant seem to figure it out either .
I'm having a problem here with hatching in AutoCAD 2000. The existing hatch patterns doesn't fulfill my needs and I need something more specific to hatch a cobble stone area. In my aCAD hatch patterns there's not a good hatch for it and I looked that I can do my own pattern using Notepad etc. but unfortunately I don't have a time to do that.
So, my question is: Is there any simple ways to create your own hatch patterns for example like in Microstation where it is very easy to do. There is an option that I can use cells (blocks in ACAD) as hatch patterns.
Or can I maybe download a custom *.pat file from somewhere and use it?
Not sure if this is possible, but a coworker said he remembers doing something like this. I want to hatch an area that has been rotated. But without knowing what the angle, is it possible to hatch the rotated area so the hatch is orthogonal? I've attached a pdf to show what I want.
View 5 Replies View RelatedWhen I was using AutoCad 2010 I could HATCH within a cube, circle or within any object that was joined together even if it had text in it would HATCH within the boundaries of the area to be hatched. Now that I use AutoCad 2013 this option does not work as if there is text in the object only a partial area will become hatched. This means I have to MOVE the cube or whatever shape to a place where there is no text inside it, HATCH and then move it back to where I wanted it in the first place.
View 1 Replies View RelatedI find conflict area between list command for hatch and calculation.
when do you make calculation list of plines 2381.399
when do you make calculation list of hatch 2545.948
Basically for example (to make this easy to understand) I've got 4 squares with hatches inside and im trying to select one single hatched area in one of the squares (and delete it). But upon selecting it it's selecting the hatches in the other 3 squares (as they were added at the same time). I've carried out a few searches in google etc and experimented with "pickstyle" but with no avail, also I've looked at groups but there are none in the drawing(so I can't ungroup).
I can do it (which I've just realised) by deselecting the boundaries in "edit hatch" but just wondered if there was a quicker way?
How to changes the settings for the "Square Area" in mapcheck's closure summary. When I right-click the dwg name in the Settings tab of Toolspace and choose Edit Drawing Settings, then Ambient Settings, I see the Area settings, but in the closure summary, there is also "Square Area". Why are these both there? It WOULD be nice to show sq. ft. as well as acres, but I can't find anywhere to edit it.
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
I need to add a hatch fill polyline area but leave the text island out. What I did is put put Polyline ID and Text island ID into an ObjectIDCollection. The code doesn't throw any error but I can't see the hatch.
Public Function AutoCADAddHatch(ByRef newAddedHatch As Hatch, ByRef HatchElementIDs As ObjectIdCollection, ByVal HatchColour As Autodesk.AutoCAD.Colors.Color,
_ ByVal HatchLayerName As String, Optional ByVal PatternName As String = "SOLID", Optional ByRef strError As String = "") As Boolean
Dim db As Database = acApp.DocumentManager.MdiActiveDocument.Database
[Code] ......
Hatch objects: Note To access this property, use the IAcadHatch2 interface.How can I access the Object.Area of an AutoCAD hatch. AutoCAD 2006 has properties that can be assigned to Fields so why can't I find the object att- area in any lisp vars?
View 7 Replies View RelatedIs it possible to fill an area with hatch patterns in a feature sketch (ipt sketch), not in idw sketch?
I want to show a safety screen (wire mesh) in a 3D model, in order to reduce the file size, I do not want to do solid wire mesh in the model, but the sketch only. I was drawing one by one line and make a hatch cross lines in the sketch, it took me lots of time to draw these lines.
I've been trying to calculate large areas using fills but I keep encountering a problem with some of the hatches not showing an area and thus ruining my calculation. I've found out that I can correct it by removing certain crossing point between lines as is shown below in my screenshots. Is there any reason this is causing a particular problem and can I avoid it to save me having to go back over my hatches checking for these malformed hatches?
area.jpg
altered.jpg
I work with maps, and i hatched a area, with a irregular shape, now i want to know this area, how can i proceed?? I already selected all area and clicked on properties to see Geometry information, acumulative... Did the List Comand.. and nothing.
View 9 Replies View Relatedi have problem with hatch,if i delete any lines from related hatch protion object area, my all related hatch object erased.pls guide me how to solve problem.
View 6 Replies View RelatedI have several days of experience with Autocad 2010... The problem: I have many (a lot) polylines in my 2D drawing that are adjacent to each other, but not joined. What is a good way of joining them, so that those that "touch" each other become one? Maybe I can hatch the area, then delete polylines and then reconstruct the boundary?
View 9 Replies View RelatedMy application has suddenly started to link the hatch pattern to the area boundaries.
The objects remain on their own layers, but I am not able to delete the hatch pattern without deleting the boundaries.
I cannot edit the hatch pattern either as the application no longer recognises the hatch pattern.
Have i changed a setting unwittingly?
We have 1 machine in the office that when using super hatch it will not "hatch" the entire area as one hatch, it breaks it into separate image based pieces. The rest of the office, it hatches as one entity so it can be changed easily. Even if we use the group command, it will not group them.
View 2 Replies View RelatedI´m trying to plot a picture with a hatch marking a area on the picture. I´m making a overview of the picture with the hatched area on it at scale 1:10000. And then i make smaller plots in scale 1:5000.
My problem is that depending on the scale the color changes (it´s darker in 1:10000).
This might be simple, but what is the best way to hatch a part of a surface at say RL4.00 only so that any part of the surface below RL4.00 is hatched and the rest of the surface is not.
View 2 Replies View Relatedwhenever I try to hatch something the cpu crashes. It even crashes in a new drawing file with nothing in it but a rectangle.
View 3 Replies View RelatedWhere do you go to create new hatch patterns .
View 1 Replies View RelatedIs there any way converting surface to 2d hatch ? I am making plan view to show materials used to make my road , to do that i need to hatch all the plan in different hatches ( for example sidewalks - green, paves -yellow, shoulders - brown... ) .
I could try hatching closed polylines made from corridor feature lines , but i get often an error that my boundaries aint closed . SO i started to think , maybe there is a way to do something from surfaces.
Is there a setting for hatch transparency? My work station it works fine. I have a few other users complining that is doesn't work. One user I imported my arg profile and it seemed to do the trick, but the next user I imported my arg and it had no effect.
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
I've attached a screenshot of the issue I'm dealing with. I have a closed polyline and when I first hatch the area it appears to be correct, but then I'll go do another command and then the hatch seems to extend beyond the boundaries of the polyline.
View 3 Replies View RelatedI would like to know if there is a lisp that would run every time I run the hatch command? I have autosave on, but I never remember to do a good clean save before I run hatch. I remember as autocad locks up and crashes! I would like a list that would prompt me to save when I hit hatch with option of yes, save or cancel. is this a tall order?
View 9 Replies View Relatedhow can I have diferent hatch on the section view, one when I have cut and another when I have fill.
seet attached.
I need to hatch either the pipe or the profile where the sewer pipe is more than 5 feet deep. Would prefer the profile.
View 2 Replies View RelatedI am working on creating a set of plans and have a couple of note pages that are generic and will not need to be change. I am creating a template with layers, layout tabs, styles, etc. I am trying to put these notes straight into a layout tab just simply by pasting them in there. The issue I am having is with the hatching on a couple of objects, the hatches appear correctly right off. When I save the drawing and reopen the hatches are a solid block, regen does not fix this. I can however explode the hatch and then undo the explode command and it appears correctly. Is there a way I can make the hatches appear correct everytime?
View 3 Replies View Related
