AutoCAD 2013 :: Mouse Buttons 1&2 Working Inconsistently
Nov 19, 2013
I have acad 13 installed on an asus laptop. I wanted to do some serious work last night so I plugged in the mouse to the usb port. Doing my usual quick clicking, anytime i was "inside the dwg" like say select or pick a point on the screen, i needed a second pick to do anything. Same with rt click for return. picking a menu item or dropdown or button works fine, "outside the dwg".
Noticed that a slow deliberate click seems to work.I reloaded the asus mouse driver, no dice.I took a 10 year logitech old mouse out, same problem.This problem does not occur using the pointing/click device built into the laptop.Is there something that is looking at the duration of my click in acad? in asus computer ?
View 4 Replies
ADVERTISEMENT
Jan 6, 2014
I have a Logitech M510 wireless mouse, and it works fine for everything, Firefox horizontally scrolls just fine with the tilt-wheel, and the forward and backward buttons on the mouse function as well. But not in GIMP.
I'm running an HP laptop with Windows 7, and GIMP 2.8.
I tried binding brush size decrease/increase to left/right scroll in the mouse wheel input and nothing happens. Then I restarted GIMP from a terminal with --verbose and told the wheel input to dump events and the only ones printed were scroll up/down. Curious, I enabled the dump for the mouse buttons input as well, and the back/previous buttons also don't generate events.
Because it works fine in other applications and because it generates no events in GIMP
View 11 Replies
View Related
Jul 16, 2013
my mouse wheel worked for panning while i am in the middle of a command, put now it stopped working and when i click the wheel i get my osnaps command. how can i get my mouse wheel to pan again?
View 6 Replies
View Related
Jun 19, 2013
I recently installed the Student version of AutoCad 2013 on my Mac through Windows 7. I am not able to use the wheel on my mouse to get to the hand tool to move around. When I hold down the wheel, it swipes over to my Mac dashboard. Also the delete button does not delete. I have to use the E command.
View 9 Replies
View Related
Aug 15, 2013
How do I configure my mouse wheel to "press to pan" in AutoCAD 2014?
View 2 Replies
View Related
Nov 3, 2012
I haven't been able to use the 3D orbiting shortcut since yesterday. I'm using a wireless Microsoft Mouse and keyboard instead of the inbuilt mouse & keyboard on my laptop (which don't seem to be executing the command either).
Up until yesterday I never had any problems orbiting the view.
View 5 Replies
View Related
Jul 28, 2002
I purchased an Inland rf 5 button mouse to use for the F4 rotate and F5 view return. The three programmable buttons work in LT and other programs, but not in inventor 5.3. Is there a setting I am missing? I have the latest driver for the mouse installed and as I said it works well in other software.
The mouse vendor says it's Inventor, not the mouse.
View 5 Replies
View Related
Aug 29, 2006
I downloaded a webtemplate for Dreamweaver. They have some mouse over buttons that I would like to change. What font did they use? Could someone give some tips? I know Photoshop a bit if that is what is needed. (Guess I don't know PS that well if I can't do it.) I attached both buttons.
View 8 Replies
View Related
Jun 16, 2011
As the topic states, I would like to assign hotkeys to mouse buttons. I attempted to do so, but when I use a mouse button for a hotkey it does not register within the customize user interface menu.
View 3 Replies
View Related
Oct 30, 2013
I followed the tutorial on this page: [URL]. However, my animation auto plays and mousing over has no effect. I have searched and sreached to no understandable (to me) avail. Here's a link to the file: [URL]
View 2 Replies
View Related
Jan 8, 2004
How can I set up the two side mouse buttons on my Microsoft mouse (used to go back and forward on web pages) to be the Zoom in and Zoom out functions in Photoshop CS?
View 9 Replies
View Related
Aug 19, 2013
My mouse has a lot of extra buttons on it, and I've set up Maya to open different marking menus when using those buttons. In order to use those marking menus, I have to hold down the extra button and then left-click. Is there a way I can set up the marking menus to open without left-clicking?
View 1 Replies
View Related
Dec 5, 2012
I recently had to reinstall LR 4.2 due to a hard drive failure. Previously, I could cycle through my photos by using the forward or reverse buttons on the side ofmy Microsoft mouse. Now I cannot. How can I get LR to respond again? I have set the mouse to 'enable program specific settings'
View 1 Replies
View Related
Feb 15, 2013
I have two menus that I use often and I would like to add them to my mouse buttons. Attached is a picture of the two menus I like and the two buttons. The Shift + Click has the correct menu already (Osnap menu2) my problem is adding my custom menu to the CTRL + Click doesn't work. I labeled Osnap Menu 1 and 2, 1 being the custom menu I have use in the past and 2 being the default osnap menu that comes with the cui file. How to get the second button to read my menu rather than both read the same osnap 2 menu?
View 1 Replies
View Related
Aug 1, 2012
My draworder tool bar buttons and pull down commands are not working. I click on them and get
Command: Unknown command "AI_DRAWORDER". Press F1 for help.
Command: Unknown command "FRONT". Press F1 for help.
This is the same issue for all of the draworder commands.
If I type draworder in the commande line I can get it to work. How do I restore my tool bar commands to get them to work?
View 9 Replies
View Related
Jun 27, 2013
I recently migrated to the Inventor 2014 release and immediately encountered several issues.
One that I haven't found reported on this site is the problem related with the 3D mouse (3D connexion Space Navigator). I've been working with it beautifully with R2012-2013 but now that I started working on Inventor 2014 it stalls and stops working suddenly. It's so bad that I stopped using the 3D mouse entirely.
[URL]
I uninstalled and re-installed the latest mouse drivers and checked that it's not the device malfunctioning. I also installed the Inventor update available on Autodesk site. No change...
View 9 Replies
View Related
Oct 27, 2011
My lot top mouse is not working no more with the zoom in and out command. I dont have and external mouse other than the one is install from factory on my lot top comp. It was working perfect, but i think i click something by mistake. I only learn enough to draw in cad but when it comes up to problems like this i do not know what to do. I was trying to copy a table with chairs from and other file and when i pasted to my drawing something happen so my mouse is not zooming in or out in my drawing .
View 5 Replies
View Related
Aug 24, 2013
How do i get my number buttons working again?
View 3 Replies
View Related
Dec 26, 2013
"Snap to object", "To Front of Page", and "To Back of Page" buttons stopped working.
View 14 Replies
View Related
Oct 1, 2012
I just had to replace my desktop computer, reinstalled AutoCad, set it up using a saved profile, everything was working fine until this morning when I came in and most of my buttons on the toolbars return "Unknown Command". Now even when I type in the command on the command line it doesn't recognize the commands. ie _layfrz Unknown command "LAYFRZ) I've gone in and "repaired" the program, shut down the computer for a full restart, to no avail.
View 3 Replies
View Related
Aug 17, 2010
I just installed AutoCAD 2011 (32-bit on Windows XP Pro) and my mouse wheel pan capability is not working. I have already confirmed that my Mbuttonpan variable is set to 1. When I press my mouse wheel button I see the 'hand icon' for a moment before my cursor returns to the crosshairs. The mouse wheel zoom works just fine, and the pan function still works on my old 2010 install.
View 7 Replies
View Related
Feb 21, 2013
Is there a way to create a blank toolbar to add custom buttons to?
View 1 Replies
View Related
Nov 21, 2013
I am using AutoCAD 2014 and trying to create custom buttons as a short cut link to open external files, such as a link to company standards, osha, or any file in general. I basically justa want to be able to open the file from with-in autocad. Like a hyperlink without having to click an object.
View 7 Replies
View Related
Apr 8, 2013
I am having a very strange issue with Photoshop CS6 - OSX 10.7 and 10.8 (recently upgraded).I havent been able to figure out how to reproduce this bug though it happens all the time every day while i work.
I work on a file maybe for 10 minutes to 1 hour and when I save a file with command s photoshop does nothing. it will not save until i make any change that registers in the history and then it does save.
Even weirder photohop will close the file as though it had been saved giving no warning box with the "file has been changed, would you like to save?" message.
This has lead to me constantly saving things and double checking if files are saved, it has also lead to me missing a file from time to time and having to redo hour of work. The issue started happening when I recently reformatted and reinstalled all my software.
View 1 Replies
View Related
Mar 27, 2013
I'm using autocad 2013 & the classic workspace instead of ribbon. For some strange reason, if 2 or more drawings are open & I minimize a drawing, it removes the minimize, maximize, close buttons from the right top side of the screen like in the attached picture. To get them back I have to go to the window pulldown & select the drawing from there. I'm using windows 7 pro with a nvidia quadro 1000m card.
View 2 Replies
View Related
Oct 28, 2010
I have a Logitech MX 600 cordless mouse. I just updated the SetPoint software as I got a new cordless keyboard. Now, the middle button pan is erratically working. None of the settings has changed. MBUTTONPAN is set to 1. Middle button is still set to "Middle Button."
Sometimes the pan works. Most of the time it doesn't. If there are new setting on the SetPoint software I need to check or uncheck? I've even tried messing with some CUI settings under the mouse component...
View 5 Replies
View Related
Feb 26, 2012
Can not click on multiple objects or lines for erase,trim or extend commands. Is there a mode that I have turned on by accident , driver warning also comes up in trim offset command.
View 6 Replies
View Related
Sep 15, 2013
I decided to do the Creative Cloud thing. Installed Photoshop CC trial. Opened up a new document and tried to drag out a selection box ... and nothing. I can't drag my mouse. I can click on things. But dragging doesn't seem to work. Neither does right clicking.
So for example, I can't move layers. I can select them in the layers panel, but I can't drag them in the workspace. Same with sliders. I can select a location on a slider, but I can't grab the handle and slide it around. I've tried resetting preferences, restarting, and disabling graphic card acceleration.
I'm running Windows 7 x64. My mouse is a wireless Logitech that I haven't had any trouble with otherwise. I opened up paint and it can track me dragging my mouse around to paint (so it's not just a ****** mouse connection or anything).
View 11 Replies
View Related
Apr 30, 2012
2013 Civil 3D locks up when using mouse scroll.
View 9 Replies
View Related
Nov 1, 2012
is there a way to make it so that i right click on the mouse, it does the 'cancel' command??
View 7 Replies
View Related
Aug 21, 2013
I have a G300 9-button mouse from Logitech and I would like to assign some frequently used commands to each button, is there any way to do this.
View 2 Replies
View Related
