AutoCAD Architecture :: Updated Logitech Mouse Software - Middle Button Pan Not Working Now
Oct 28, 2010
I have a Logitech MX 600 cordless mouse. I just updated the SetPoint software as I got a new cordless keyboard. Now, the middle button pan is erratically working. None of the settings has changed. MBUTTONPAN is set to 1. Middle button is still set to "Middle Button."
Sometimes the pan works. Most of the time it doesn't. If there are new setting on the SetPoint software I need to check or uncheck? I've even tried messing with some CUI settings under the mouse component...
My Logitech Performance MX mouse's left and right scroll does not work in PS CS6. It moves the slide bar, but the image does not follow. it just sits there. I have the latest updates for the SitePoint software. I am running Windows 8 and CS6 64 bit.
I haven't been able to use the 3D orbiting shortcut since yesterday. I'm using a wireless Microsoft Mouse and keyboard instead of the inbuilt mouse & keyboard on my laptop (which don't seem to be executing the command either).
Up until yesterday I never had any problems orbiting the view.
I've been researching this all day and I can't find anything that works for me. Is there a way to change the middle mouse button from "Pan" to "Rotate" my model? Currently, I hold "Shift" while holding down the middle mouse button and that rotates my model. Can I incorporate that into my middle mouse button somehow without having to buy a 3D Connexion mouse?
So recently I started making something in Inventor, and like most programs you can press the middle mouse button and it will pan or orbit. Well I'm pretty sure that in the past if I pressed the middle mpuse button it would pan or orbit. But now it is zooming all for the model, and only when it is zoomed to the whole model does it let me pan or rotate. If I were to zoom in on a line for example and wanted to pan to the right, it zooms me out to the whole model, and then I can pan. I have tried multiple mouse buttona all combinations of shift ctrl and alt and middle mosue, but nothing is working. How can I make it so it does not zoom all when clicking the middle mouse?
On some computers with AutoCAD 2013 SP2, pan and zoom launched with the middle mouse button is significantly slower than pan and zoom performed by launching the PAN or ZOOM command on the command line.
The double middle mouse button click command. I use the middle mouse button to pan, but if I pan too quickly, it interprets it as a double-click and zooms all the way out. I tried changing the double click speed in my mouse settings but that didn't work. I feel like there should be something in the shortcut settings I can change?
3d Max Design 2013. I'm having issues right off the bat with my mouse, especially the middle mouse button. During the tutorial videos, we're instructed that using the MMB with the Ctrl, Alt, or combination there of, a hand icon will appear and certain movements will occur. My mouse is not behaving in this manner. I am wondering if there is a certain setting within windows I need to set the MMB, specifically for this program, since the default setting doesn't seem to work.
I need to be able to work back and forth with sketchup, and revit. Unfortunatly the orbit and pan commands in revit are the exact opposite of sketchup( mmb = pan in revit) (mmb = orbit in sketchup) (shift + mmb = orbit in revit) (shift + mmb = pan in sketch up)
these commands are ingrained in my muscule memory and going back and forth is like writing one sentnce with your left hand and the next with your right. it is totally dibilitating.
Is there any way to customize these in revit? Can i change the MMB to be orbit and shift+MMB to be pan ?
If there is a way to change the behavior of the middle mouse button in the Node Editor so that by default it moves the panel without needing to press the Alt key?
Ideally I'd like to swap the behavior of pressing the Alt Key + Middle Mouse with just the Middle Mouse.
I am working on getting some settings done, moving from 2008 to 2012. How do you set the Middle Mouse Button (wheel) to either Zoom All or Zoom Extents when you double click it? I thought it was set in the Main CUI file.
I have an inactive snap shortcut menu. When clicking shift + right mouse button the menu appears but when I typet
"E" for "ENDpoint", "M" for "Midpoint" or when I just click over the respective icons in the menu nothing really happens and I get the following message in the command bar:
"Command: _endp Unknown command "ENDP". Press F1 for help."
or
"Command: _mid Unknown command "MID". Press F1 for help."
I tried following, none of which worked:
1. resetting the main customization file ACA_Global.cuix
2. switching between different profiles and cuix files
3. reinstalling Autocad Architecture 2013
4. uninstalling and Installing Autocad Architecture 2013 service pack 1
5. installing older versions of Autocad (2008 and Architecture 2012)
6. reinstalling Windows 7 and installing Autocad Architecture 2013 again
I just got a new Logitech wireless keyboard and mouse (MX 5500 Revolution) and I can not pan with the mouse. I love this wireless set up and it was a birthday present so I dont want to just get rid of it. I have the VX Revolution mouse at the office and have no problems with it.
When I am browsing to open drawings for some reson the back button doesn't work with the ACA2011 file browser. The mouse button works fine with all other applications so am I correct to assume something is wrong with the ACA file browser?
I have a Microsoft wireless notebook laser mouse 6000 and I can not pan using the middle button for some reason. I have tried to change the variable in the MBUTTONPAN command from 0 to 1 and it made no difference.
I am new to creating ribbons.Is there any way to put two vertical ribbon button just in the middle of the panel? Is it possible to align Ribbon Buttons? Or changing properties of ribbon buttons like font size?
This is part of my code that creating two vertical buttons in a panel,but unfortunately they aren't align.
Dim ribbonbutton5 As New RibbonButton() ribbonbutton5.Text = "Detail" ribbonbutton5.ShowText = True ribbonbutton5.ShowImage = True ribbonbutton5.LargeImage = getBitmap(My.Resources.Rib_32) ribbonbutton5.Image = getBitmap(My.Resources.Rib_16)
How come the zoom on middle mouse reacts so slowly compared to using the zoom icon (magnifier) ? its slow, clunky and takes a moment to get going, it also has zoom limits which the magnifier does n`t.
Similar to how Minecraft allows you to select the block your cursor is over via middle mouse click,
wouldn't it be intuitive to make the eye dropper/color selector bound to the middle mouse button?
As far as I can tell, a middle mouse click does nothing in PDN right now and when I tested to see if this feature was already implemented, it just felt right to me.
So I say follow in Notch's footsteps with the middle mouse button, afterall he himself advocated PDN on his blog for creating games
How to change the zoom in and out behaviour of the middle mouse wheel in Windows GIMP to work without having to press the ^ (control) button on the keyboard? I'm using to zooming in and out using just the mouse wheel alone and hoping that a setting in GIMP could be changed so that it also works without pressing the ^ (control) button at the same time.
I've googled this along with a few other things over last couple of days but no luck. Can this be done?
I followed the tutorial on this page: [URL]. However, my animation auto plays and mousing over has no effect. I have searched and sreached to no understandable (to me) avail. Here's a link to the file: [URL]
how to make a toolbar button so that when i click it and select a few single text, it will automatically change the text base point to be at "MIDDLE CENTER"....
At the moment, i use to create a button with macro of " ^C^C_text;j;mc "....But the problem is whenever i use this button, i still need to type "MC" at the command prompt.. How to make it so that after i click the button, all i need to to is just select the text..
Logitech M305 - 3-button mounse (Left/Right/Center wheel) Center Wheel may be rotated or pressed for 2 separate functions. When rotated, does scrolling, when pressed USED TO PAN. Now, for some reason it's changed to zoom.
How do I change the middle wheel, when pressed from Zoom to pan. I looked within the help desk and there is informaion on Macros and other commands, can't really understand that, but just simply need to get it back to the PAN command.
I just installed Autocad 2010 student, and now my microsoft wireless mouse 4000 will not pan when I press the scroll button. I have read a few older post that talk about Mbuttons but I can't find how to change my Mbutton from 0 to 1 or whatever it is supposed to be.
I have a Logitech mouse that uses Set Point. I would like the sideways function of my wheel to function as Pan. In Acads CUI there is a list of ten buttons which different functions. How do I know which button is which? None of them have Pan by default, so how can I add it to a specific button?
I've been having this problem for a while with Photoshop and my Wacom pen...
I'll be painting and I'll bump the middle button on my wacom pen and I'll get the circle of circles that spins forever... until I force quit. It's so cumbersome. I have my middle button mapped to the middle mouse click.
I use a mac and currently on CC. I have an intuos 5 but It used to happen to my three too. It's been less of a problem lately because of the crash recovery feature but it's still a huge problem...Like if there was an auto save feature or something then I'd be less frustrated.
I seem to have trouble articulating what's going on as well because all I get back is... did you update the drivers? it must be a wacom issue. try an update... etc.
The wheel spins but the pen still draws... like... FML
how to allow my right click mouse button to the function of the F3 key? I want to be able to draw, move, copy or whatever and mid-command be able to right click (on or off) the snap that are assigned to F3.
I updated to 4.3 today and I was still unable to import my D600 NEF/RAW files. After I updated, I rebooted and it seemed like I could actually import the D600 NEF files. However a few moments later, somehow those images were no longer in my catalog/library and when I try to reimport them again it says the files are not compatible and no preview was available during the import screen.
