My Logitech Performance MX mouse's left and right scroll does not work in PS CS6. It moves the slide bar, but the image does not follow. it just sits there. I have the latest updates for the SitePoint software. I am running Windows 8 and CS6 64 bit.
View 2 RepliesI have a Logitech MX 600 cordless mouse. I just updated the SetPoint software as I got a new cordless keyboard. Now, the middle button pan is erratically working. None of the settings has changed. MBUTTONPAN is set to 1. Middle button is still set to "Middle Button."
Sometimes the pan works. Most of the time it doesn't. If there are new setting on the SetPoint software I need to check or uncheck? I've even tried messing with some CUI settings under the mouse component...
I find it a little hard to use the mouse scroll button for panning and rotating. Often I tend to zoom the scene or in the act of balance the scroll button when pressing it, I don't get the right tool and have to press it again, and that makes it not as intuitive as I would like to. I wounder if it's possible to alter the way I pan and rotate? Can I place the pan and rotate function at the right mouse button? Or is there mouses on the market that have a middle mouse button AND a scroll wheel so I can separate the pan/rotate from the zoom?
View 5 Replies View RelatedI just installed Autocad 2010 student, and now my microsoft wireless mouse 4000 will not pan when I press the scroll button. I have read a few older post that talk about Mbuttons but I can't find how to change my Mbutton from 0 to 1 or whatever it is supposed to be.
View 9 Replies View RelatedWhen holding down the left mouse button in the scroll bar area for just a fraction of a second too long, the scroll bar moves several positions. In the past, it wasn't this touchy. It's so touchy that it's impossible to CONSISTENTLY click once and make the scroll thingy move just one position. In previous versions, it works like a charm. Is there a way to adjust this mouse issue?
I use it on every image for cloning so that I can check one section at a time. For this reason, I've now gone back to CS5, but also because CS6 crashes on me and it sometimes gets stuck on Auto Saving files (possibly because they're big).
Is there a way to create a shortcut for mouse left-click button on the keyboard?
View 8 Replies View Relatedshould alt-left mouse rotate?I can use alt-right mouse to zoom in and out, and alt-ctrl-left mouse to tilt the model, but alt-left mouse does NOTHING?I can use alt-Left mouse in 3D Coat normally, so it's not the mouse.
How can I resolve this? I don't remember doing anything that would mess up my mouse preferences or even seeing where I could change them?I have restarted. I'm on Win7 64 with all Mudbox 2011 service packs installed.
Can not click on multiple objects or lines for erase,trim or extend commands. Is there a mode that I have turned on by accident , driver warning also comes up in trim offset command.
View 6 Replies View RelatedI haven't been able to use the 3D orbiting shortcut since yesterday. I'm using a wireless Microsoft Mouse and keyboard instead of the inbuilt mouse & keyboard on my laptop (which don't seem to be executing the command either).
Up until yesterday I never had any problems orbiting the view.
I just got a new Logitech wireless keyboard and mouse (MX 5500 Revolution) and I can not pan with the mouse. I love this wireless set up and it was a birthday present so I dont want to just get rid of it. I have the VX Revolution mouse at the office and have no problems with it.
View 9 Replies View RelatedIt will scroll right, up, and down but it will not scroll left. I have tried uninstalling photoshop and everything. I am using Win XP and Photoshop 7.
View 2 Replies View Relatedi just installed CS6 on a mid2009 17" MacbookPro and am experiencing an annoying issue with scrolling to zoom. I use a magic mouse, and do not have this problem in CS4. Whenever I scroll the mouse "wheel" to zoom in, it zooms in at like 20% or so levels everytime, instead of smoothly as it did in CS4.
I checked preferences, and I have animated zoom enabled. I have a NVIDIA GeForce 9400M 256 MB video card. Also, here are other details:
Processor 2.8 GHz Intel Core 2 Duo
Memory 8 GB 1333 MHz DDR3
I just switched to a mac from PC and I was used to zoom with my mouse scroll and hold shift to zoom in even increments to keep the image as crisp as possible. Now on a mac I still haven't found a way to do this. When the zoom with mouse scroll is enabled (I use Apple's Magic Mouse), I'm only able to zoom in and out getting uneven values such as 88,7%, 97,6% etc - the same action as in Photoshop WITHOUT shift pressed. I've also tried plenty of different keys with mouse scroll zoom.
Is there any way to zoom in even steps with Magic Mouse on a mac? This is driving me crazy, as now I have to select the zoom tool and use it to zoom in and out, which significantly slows down my work flow.
I just bought Photoshop CS6 and it seems that it isn't working properly. I run Windows 7. The left click and left alt are not working. The buttons work perfectly on other programs.
View 1 Replies View RelatedLightroom 4.3, Win 7 64 bit
I am trying to edit an Adjustment Brush in the Develop module.
I want to fine tune the coverage area for the brush.
I can use Ctrl +/- keys to zoom in/out, and the Page Up/Down keys to scroll up and down when zoomed in, but there does not seem to be any way to scroll right and left when zoomed in. The key shortcut lists I've seen don't list anything for scroll left and right. How to scroll the image left and right when zoomed in ?
After installation I went directly into the editor and right away I saw that the software was very sluggish with my cursor dragging . After clicking on a top menu (File) the menu bar open (5 sec.)and if I scroll it down I do not see the blue color following my cursor, and if I click at the location in the bar of my cursor it takes a few second before it respond. I am also using the following adobe softwares that works flawlessly : Photoshop CS5.5 extended; Bridge; Camera Raw; Lightroom 4.2. My computer uses an Asus P7P55-E Premium motehrboard with Win 7 pro 64 bits with an intel I 860 2.8 mhz and 8 gigs of RAM. All my adobe softs are 64 bits, except for elements 11. After seeing that, I installed the upgrades without any visible problems. Even after that nothing has improved.
I have to say that I have quite a few softwares installed that all work perfectly such has Topaz bundle; Photomatix pro, etc. In fact of all my softwares this is the only one that is giving me troubles.
Is It possible to Zoom In/Out with Scroll Mouse In Lightroom, just like you can do that In Photoshop. Also, I noticed Inside the Library you can Zoom In and Out with the Zoom Slider In the Bottom of the page. But there Is no Zoom Slider Inside the Develop Mode, Why there Is no Zoom Slider Inside the Develop Mode ?
View 2 Replies View RelatedIs it possible to adjust the behavior of Corel Draw X5 in order to have the scroll wheel of the mouse behave like the scrolling action on a web browser. I would like a vertical scroll to vertically scroll the design when I am zoomed in and some of the design continues beyond the current view. Also, I have a mouse that can scroll horizontally when the scroll wheel is nudged from side to side, so I would like to have a horizontal scroll as well, if possible.
View 1 Replies View Related2013 Civil 3D locks up when using mouse scroll.
View 9 Replies View RelatedI have a Logitech MX Laser 1000 mouse, love the mouse. But the Middle scroll button does not pan when you hold down the wheel. And when you double click the wheel it no longer does a zoom extents. When you scroll the wheel it does zoom in and out. My mbuttonpan is set to 1. Not sure if I toggled something on or off.
View 3 Replies View RelatedAlt + mouse scroll (Zoom-In/Out) doesn't work in my illustrator program.What should I do?
View 1 Replies View RelatedI have a tablet and I am trying to change brush size and hardness with the pen but I keep creating new layers. Is there a way to turn this off because I would like it to flow better. With the mouse if I ctrl+alt +left mouse is gives me a new copy of my layer. With the pen I get the pressure/size to come up but it is fickle and mostly just resorts to creating a new layer copy which is what I want to disable so it just does the brush size/hardness option. It seems the left mouse click doesn't display in any keyboard shortcuts.
View 1 Replies View RelatedI've just started with Inventor 2009 and have found that you as default you cannot orbit around by pressing in the mouse scroll wheel, holding ctrl (or shift) and moving around.
This works in AutoCAD 2009 3D and all other 3D software I have used, so I'm assuming that there is a simple setting somewhere to activate this?
I have a CAD 2013 Arch user who is having a strange issue with zooming in or out using the mouse scroll wheel. It doesn't happen all the time which frustrates me because I never see it, but she does. Every now and then when she's working in a drawing she'll try to zoom out slightly, but the it zooms WAY out, so much that the drawing looks like a tiny speck. When she tries to correct it by zooming in, it zooms WAY in. Then for some reason, it starts working fine. This seems to happen to her multiple times a day and I'm sure what to or how to troubleshoot this. She's using a wireless mouse from Logistic and seems to have the current drivers installed.
View 1 Replies View RelatedIt was all told in the heading already: Is possible to Scroll Layers palette usning mouse wheel?
View 2 Replies View RelatedI cannot use my mouse scroll to navigate up and down the numerous folders I have in my library. I can grab the page bar and move up and down (and while I'm hovering over the page bar, I can scroll up and down with the mouse wheel) - but only when I'm actually over the folders, the mouse wheel doesn't work!
It works fine when I'm in develop mode and I can scroll through all the presets and history.
But when I'm in library mode, the mouse scroll doesn't move my folders up and down ?
Is there a way I can move the playhead with my mouse scroll wheel?
I can scroll horizontally through my timeline, but that is not what I need.
I want to move the playhead every scroll-'click' by 15 frames for example.
Pinnacle Studio had that feature, worked really fast.
I am using AutoCad 2012 and have just gotten a new screen and Logitech mouse. I can't get the scroll wheel to pan for me. When I press the scroll wheel I see a zoom button on the screen instead of a pan symbol.
View 1 Replies View RelatedI used to have x4 . One of the features I like is wherever you place the cursor and use your the scroll wheel on the mouse, it will zoom in where the cursor is.
When i switched to x5 , it doesnt center to the cursor. Is that a glitch? is there a way im doing it wrong or any setting i need to fix?
If I use the scroll wheel on my mouse in X3 it changes the zoom and does not scroll.
Using the same in X5 works OK and scrolls.
How I can change a setting somewhere so that it scrolls in X3
When zooming in and out using the mouse wheel, the increments used in zooming are rather course.
I've tried changing the windows mouse options to no effect within Inventor. I've also looked around the application settings and could not readily find any options which adjusts zooming increment.
Is there even such an option, or am I out of luck on this one?