should alt-left mouse rotate?I can use alt-right mouse to zoom in and out, and alt-ctrl-left mouse to tilt the model, but alt-left mouse does NOTHING?I can use alt-Left mouse in 3D Coat normally, so it's not the mouse.
How can I resolve this? I don't remember doing anything that would mess up my mouse preferences or even seeing where I could change them?I have restarted. I'm on Win7 64 with all Mudbox 2011 service packs installed.
My Logitech Performance MX mouse's left and right scroll does not work in PS CS6. It moves the slide bar, but the image does not follow. it just sits there. I have the latest updates for the SitePoint software. I am running Windows 8 and CS6 64 bit.
I recently installed the Student version of AutoCad 2013 on my Mac through Windows 7. I am not able to use the wheel on my mouse to get to the hand tool to move around. When I hold down the wheel, it swipes over to my Mac dashboard. Also the delete button does not delete. I have to use the E command.
I just installed AutoCAD 2011 (32-bit on Windows XP Pro) and my mouse wheel pan capability is not working. I have already confirmed that my Mbuttonpan variable is set to 1. When I press my mouse wheel button I see the 'hand icon' for a moment before my cursor returns to the crosshairs. The mouse wheel zoom works just fine, and the pan function still works on my old 2010 install.
Can not click on multiple objects or lines for erase,trim or extend commands. Is there a mode that I have turned on by accident , driver warning also comes up in trim offset command.
I'm scultping a mesh of 1.8 million and everything is fine and smooth. After 3 or 4 minutes the program starts lagging badly to the point it is not usable. If I leave it idle for 10-15 minutes and resume it's fine again, for another 3 minutes. If I close the program and re-open it (as soon as it starts lagging) the lag persists. If I reboot it's fine (for 3 minutes of course).
I've tried changing the graphic's card driver (currently latest nvidia), changing the features in the nvidia control panel to min, and also the ones in mudbox. To be honest I don't think it's the graphic's card fault.
I thought it had something to do with the memory (leakage maybe?), so I did some tests but the working set size is stable at 300K and the virtual memory slowly goes up to 390K where it stops (this during the 3 minutes of sculpting).
I realize with mb 2012 there will be little interest in solving the old version's problems but I reckoned I'd give it a last shot. It's also a student edition so I can't upgrade.Here's my settings
OPERATING SYSTEM Name: Microsoft Windows 7 Professional Version: 6.1.7600 Service Pack: 0.0 Architecture: 64-bit Registered User: Alessandro Language: 1033 Domain Role: 0 Total Physical Memory: 4026 MB Total Virtual Memory: 8388607 MB
I just bought Photoshop CS6 and it seems that it isn't working properly. I run Windows 7. The left click and left alt are not working. The buttons work perfectly on other programs.
My brushes an sculpting tools arnt doing wht they're supposed to. My sculpting tool is taking from the mesh and my bumpmap is doing the same, even whn i press ctrl my bumpmap dsnt raise as much and ive checked my brush strength. how to reset my settings
I followed the tutorial on this page: [URL]. However, my animation auto plays and mousing over has no effect. I have searched and sreached to no understandable (to me) avail. Here's a link to the file: [URL]
fix to the common errors caused by previous grab brushes surface proximity behavior along center axis. it was a small thing IMO but the solution created evena bigger issue.
now that is works mostly on some sort of volume proximity along x axis it becomes a big problem for moving around two discontinuous surfaces that are close to center axis.
that last version it was good was 2011. 2012 and onwards it seems to be ruined.
I have a tablet and I am trying to change brush size and hardness with the pen but I keep creating new layers. Is there a way to turn this off because I would like it to flow better. With the mouse if I ctrl+alt +left mouse is gives me a new copy of my layer. With the pen I get the pressure/size to come up but it is fickle and mostly just resorts to creating a new layer copy which is what I want to disable so it just does the brush size/hardness option. It seems the left mouse click doesn't display in any keyboard shortcuts.
When holding down the left mouse button in the scroll bar area for just a fraction of a second too long, the scroll bar moves several positions. In the past, it wasn't this touchy. It's so touchy that it's impossible to CONSISTENTLY click once and make the scroll thingy move just one position. In previous versions, it works like a charm. Is there a way to adjust this mouse issue?
I use it on every image for cloning so that I can check one section at a time. For this reason, I've now gone back to CS5, but also because CS6 crashes on me and it sometimes gets stuck on Auto Saving files (possibly because they're big).
I am using Illustrator on a Wacom 24HD on a PC, which works quite well, except that as a right handed person, the tooltips, which appear to the right of the mouse cursor, are covered by my hand. Windows (and the Wacom settings) both have a left hand / right hand setting which control where a popup menu appears, however, I do not see anywhere where I can control where the tooltips appear, presumably because this is an Illustrator feature, not a Windows feature. Its particular important for this application because tooltips are used for information (such as size when dragging out new shapes), not just for beginners needing a reminder what a button means. To put the tooltips to the left of the cursor instead of the right?
I s there an efficient way of stretching an object. Usually I drag my mouse from right to left, thereby selecting objects that my selection box just touches. I want to drag my mouse from left to right so that only the vertices which are inside my selection box get selected.
Just got my new work PC and I'm having issues drawing lines in AutoCAD LT 2011.
Much like other people, circles are fine, as is most everything else. It's just the lines (and who uses lines when drawing things?). So, as you can imagine, my frustration level is to the point where my head is about to explode.
Here are my PC Specs:
Windows 8 Intel Core i7-3770 3.40GHz - 8 CPUS Memory - 16GB Ram AMD Radeon HD 7770 2GB GDDR5 Memory
And this is coming from an old Dell that ran 2011 like a champ, the computer just got old and died.
I can't see any reason, component wise, why the CPU can't handle it, and, since it's just on lines, it leads me to believe it's a software issue where 2011 LT isn't playing nicely with Windows 8 or some other component.
Could it be that it's just time to get with the times and upgrade or is there some workaround?
When i click my mouse to draw the cursor moves up and to the left of the position i started which makes any and all editing impossible. Imagine trying to draw a line but the starting point is a half to a full inch up and to the left of where you wanted the line to start. I've tried a clean install even changed my mouse. doesn't do it it drawx4 only photo-paint x4.
I still want it to have its normal behavior while in a command, but when not in a command it still enters the selection mode, which does not work, but if it would enter a zoom window command, it might be a more useful command.
I'm working on a project right now where i need to use creased edges for sculpting.
I'm on Mudbox 2012 SAP 1, as mentioned in the title
Importing the FBX from Maya with smooth on (smooth preview) So The sculpying itself goes well.
But when it comes to transfert detail on creased topology, the problems start to emerge from the myst..................
So. I get ugly artefacts on the creased edges locations. I can bust'em out, but its very time consuming.
So Transfert to a non creased topology. Lovely transfert with no errors.
Then extracting vector displacement from the non-creased topology and the result is bad when rendering. The mesh looks smoothed without the sharp corners present on the sculpt.
So, trying to extract with non-creased topo as source and creased as target. Better, but still not good. Tryed use crease and hard edges, subdivided target topo.. Almost anything in fact.
Even flatten the non-creased topo before extracting maps. I'm loosing my teeth, weight, and my son doesn't remember my name.
Any workflows with creased edges ? Is the hole stuff better implemented in Mudbox 2013 ?
i have problem with 3Ds Max 2012. When I go to click on one of my mesh and select and left click the pannel that is soposed to pop up doesnt. I dont know if I locked it some how or if there is a bug.
My Photoshop CS4 and CS5 shows "Photoshop has stopped working" . Whereas I have Windows 7 64bit, 6GB RAM, 512MB Graphics Card.
Earlier I worked in this version. But after formating my conputer I could not do anything with only in Photoshop. First I installed Photoshop CS4 it was failed to work then install Photoshop CS5..It also failed to work.
I updated Photoshop CC about 7 days ago. Before that it worked fine, since then I have been using Photoshop CS6 for some work (CC left it there when it installed) but yesterday I wanted to go to Photoshop CC from Lightroom 5.2 and Photoshop CC hung. Rebooted computer and tried to open Photoshop CC but it crashes on initialization.
As interim measure I installed PS CS6 as an optional external editor in Lightroom, but I would like to use Photoshop CC again one day!
Yesterday, I tried to start up Photoshop, but it got halfway through initializing and stopped, flashing a message: "Adobe Photoshop CS5.1 has stopped working." I shut down the computer and tried again, but it repeated three or four times.
So I uninstalled the program. Upon reinstallation, installation failed and the computer said: "Your installation encountered errors. Please try restarting your system and installing again. Exit Code: 20."
I have been using my program since June without issue. Suddenly it stopped working. I can open the program but it will not create a new file or open an existing file. If I "open with" from windows explorer it won't open either. I have uninstalled and reinstalled the program and I'm still not having any luck.
