Just installed Maya 2013 and can't seem to reorder objects in the outliner with the usual middle click drag.
Have to click several times on the name and try again until eventually it does it.
I have a problem with the shader nodes in the outliner. I have Maya 2013 SP2(x64).
When im modeling, save, quit maya and open it again... sometimes i found a blank screen and i have to change the view to see my model, everything is in wireframe, my mental ray disappear and i have to load the plugin again and i found (Grey Icon) shader nodes in my outliner and i cant move them from there.
The "DAG objects Only" dont make them disappear, the optimize Scene dont work.How i can move them from there?
I'm using Maya 2011 and I'm noticing, there are transform nodes in the outliner hierarchy for my skeleton. Should these be deleted? Some of them delete cleanly and some of them delete taking the bone with them. ???
View 2 Replies View RelatedSimilar to how Minecraft allows you to select the block your cursor is over via middle mouse click,
wouldn't it be intuitive to make the eye dropper/color selector bound to the middle mouse button?
As far as I can tell, a middle mouse click does nothing in PDN right now and when I tested to see if this feature was already implemented, it just felt right to me.
So I say follow in Notch's footsteps with the middle mouse button, afterall he himself advocated PDN on his blog for creating games
If there is a way to change the behavior of the middle mouse button in the Node Editor so that by default it moves the panel without needing to press the Alt key?
Ideally I'd like to swap the behavior of pressing the Alt Key + Middle Mouse with just the Middle Mouse.
I am working on getting some settings done, moving from 2008 to 2012. How do you set the Middle Mouse Button (wheel) to either Zoom All or Zoom Extents when you double click it? I thought it was set in the Main CUI file.
View 9 Replies View RelatedJust installed and can't select any object without going to the outliner.
All i want to do is just go to the object and select.
I am using a MacBook laptop without external mouse and on Maya 2013 I could select multiple outliner items with the CMD + ALT keys. Since Maya 2014, this does not work anymore. how I can multi-select ? (I am not talking about the SHIFT key because my items are not contiguous).
View 8 Replies View RelatedI have two menus that I use often and I would like to add them to my mouse buttons. Attached is a picture of the two menus I like and the two buttons. The Shift + Click has the correct menu already (Osnap menu2) my problem is adding my custom menu to the CTRL + Click doesn't work. I labeled Osnap Menu 1 and 2, 1 being the custom menu I have use in the past and 2 being the default osnap menu that comes with the cui file. How to get the second button to read my menu rather than both read the same osnap 2 menu?
View 1 Replies View RelatedI use cs2 and when in photoshop when i left click on any of the tools for instance the pen tool it brings up the menu to select pen tool, freeform pen tool, etc.. rather than just selecting it. I am use to having to right click on the the pen tool to get that menu, i was wondering how i would change it back. Same thing happens when i left click on all the tools on the tools menu, just used the pen tool as an example.
View 5 Replies View RelatedHow come the zoom on middle mouse reacts so slowly compared to using the zoom icon (magnifier) ? its slow, clunky and takes a moment to get going, it also has zoom limits which the magnifier does n`t.
View 2 Replies View Related3d Max Design 2013. I'm having issues right off the bat with my mouse, especially the middle mouse button. During the tutorial videos, we're instructed that using the MMB with the Ctrl, Alt, or combination there of, a hand icon will appear and certain movements will occur. My mouse is not behaving in this manner. I am wondering if there is a certain setting within windows I need to set the MMB, specifically for this program, since the default setting doesn't seem to work.
View 7 Replies View RelatedI need to be able to work back and forth with sketchup, and revit. Unfortunatly the orbit and pan commands in revit are the exact opposite of sketchup( mmb = pan in revit) (mmb = orbit in sketchup) (shift + mmb = orbit in revit) (shift + mmb = pan in sketch up)
these commands are ingrained in my muscule memory and going back and forth is like writing one sentnce with your left hand and the next with your right. it is totally dibilitating.
Is there any way to customize these in revit? Can i change the MMB to be orbit and shift+MMB to be pan ?
When I click right mouse button, it shows menu like below picture.
But i want to set menu like this.
How about add this feature to Photoshop?
Hold down mouse middle button = hold down spacebar panning?
I haven't been able to use the 3D orbiting shortcut since yesterday. I'm using a wireless Microsoft Mouse and keyboard instead of the inbuilt mouse & keyboard on my laptop (which don't seem to be executing the command either).
Up until yesterday I never had any problems orbiting the view.
I've been researching this all day and I can't find anything that works for me. Is there a way to change the middle mouse button from "Pan" to "Rotate" my model? Currently, I hold "Shift" while holding down the middle mouse button and that rotates my model. Can I incorporate that into my middle mouse button somehow without having to buy a 3D Connexion mouse?
View 9 Replies View RelatedSo recently I started making something in Inventor, and like most programs you can press the middle mouse button and it will pan or orbit. Well I'm pretty sure that in the past if I pressed the middle mpuse button it would pan or orbit. But now it is zooming all for the model, and only when it is zoomed to the whole model does it let me pan or rotate. If I were to zoom in on a line for example and wanted to pan to the right, it zooms me out to the whole model, and then I can pan. I have tried multiple mouse buttona all combinations of shift ctrl and alt and middle mosue, but nothing is working. How can I make it so it does not zoom all when clicking the middle mouse?
View 1 Replies View RelatedHow to change the zoom in and out behaviour of the middle mouse wheel in Windows GIMP to work without having to press the ^ (control) button on the keyboard? I'm using to zooming in and out using just the mouse wheel alone and hoping that a setting in GIMP could be changed so that it also works without pressing the ^ (control) button at the same time.
I've googled this along with a few other things over last couple of days but no luck. Can this be done?
I would like to know if some users have the same problem : when I vectorize manually a bitmap with the polyline tool of CorelDraw X6, sometimes I have two nodes very close (I don't understand why because I do one click with my mouse...). I change my mouse without improvement.Do you know a macro to clean my polylines and to transform the "double" nodes in a single node (adjusting the gap distance) ? The reduce nodes feature in CorelDraw is not nice to do that.
View 1 Replies View RelatedOn some computers with AutoCAD 2013 SP2, pan and zoom launched with the middle mouse button is significantly slower than pan and zoom performed by launching the PAN or ZOOM command on the command line.
View 7 Replies View RelatedThe double middle mouse button click command. I use the middle mouse button to pan, but if I pan too quickly, it interprets it as a double-click and zooms all the way out. I tried changing the double click speed in my mouse settings but that didn't work. I feel like there should be something in the shortcut settings I can change?
View 1 Replies View RelatedI have a Logitech MX 600 cordless mouse. I just updated the SetPoint software as I got a new cordless keyboard. Now, the middle button pan is erratically working. None of the settings has changed. MBUTTONPAN is set to 1. Middle button is still set to "Middle Button."
Sometimes the pan works. Most of the time it doesn't. If there are new setting on the SetPoint software I need to check or uncheck? I've even tried messing with some CUI settings under the mouse component...
I am working on a scene in Maya 2011 as a Maya binary and can open the scene up in Maya 2012 as a binary without any problems. But, when I save the file in Maya 2012, I can no longer open it in Maya 2011.
I've read in the forums that I can save it as a Maya ASCII file and have better luck transferring between Maya versions but I cannot get Maya 2011 or 2012 to save the scene as a Maya ASCII file.
I get the following error: // Error: File contains unknown nodes or data. To preserve this information, the current file type cannot be changed.
I've tried "Ignore Version" on when opening and have deleted all all by type/non-deformer history but no luck.
I'm attempting to export out an animation clip and got the above error. A similar post years back and said it was a plugin issue. But nor sure which plugin I might have turned off.
By the way, Steps performed prior to"
Selected mesh and rig (contains IKFK nodes)> Generated character set "walk", ect Then while still selected, Edit>Keys> Baked Simulation Then from the graph editor and the character selected, File> Export Animation Clip....that's when I get the error.
I think I covered the steps correctly. Maybe I'm missing something?
You more experiance animators/riggers might be able to shed some light on this modeler.
I'm having trouble with my right click on my mouse. Until about a month or so ago my right click would bring up a short cut menu that inclided things like move, rotate, scale, copy. But now it includes none of those features.
View 4 Replies View Relatedis it possible to configure photoshop to zoom out on right mouseclick. The same way it zooms in with left mouseclick.
View 3 Replies View RelatedI right-click on a jpeg with my mouse in My Pictures (I'm a Windows user) for example, I only see the options Preview, Edit, Print and so on. I do not see 'Edit with Photoshop' there anymore.
I hope to have 'Edit with Photoshop' when I right-click.
I have problem when i duplicate polygon another side of model. The object is not smooth, it look like different model. I try to "combine" and "mesh" vertex from middle of object. but it still same. The polygon will smooth if i use "smooth tool". But i need low polygon for transfer map from high polygon to low polygon. but it not work, because low polygon look like different model.
I need smooth low polygon, but not to much smooth. I need only when i duplicate polygon, it not look like different model is okay.
URLs....every tool useless without closing and restarting Photoshop.It always happens for me after the computer has been in sleep mode, although I have seen it occur out of nowhere from a fresh boot.I'm using a completely generic 3 button MS optical mouse with the generic MS driver, no other programs on my machine suffer from completely random mouse coords, including Photoshop CS3.
For replying with 'check your drivers': URL....
Here is the full system info for my machine:
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x32
Operating System: Windows 7 32-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:7, Stepping:6 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 2
Processor speed: 2493 MHz
[code]....
I have a tablet and I am trying to change brush size and hardness with the pen but I keep creating new layers. Is there a way to turn this off because I would like it to flow better. With the mouse if I ctrl+alt +left mouse is gives me a new copy of my layer. With the pen I get the pressure/size to come up but it is fickle and mostly just resorts to creating a new layer copy which is what I want to disable so it just does the brush size/hardness option. It seems the left mouse click doesn't display in any keyboard shortcuts.
View 1 Replies View Related