AutoCAD Inventor :: Rotate Model With Middle Mouse Button

Apr 10, 2012

I've been researching this all day and I can't find anything that works for me.  Is there a way to change the middle mouse button from "Pan" to "Rotate" my model?  Currently, I hold "Shift" while holding down the middle mouse button and that rotates my model.  Can I incorporate that into my middle mouse button somehow without having to buy a 3D Connexion mouse?

View 9 Replies


ADVERTISEMENT

AutoCAD Inventor :: Middle Mouse Button Is Zooming All Instead Of Panning

Mar 8, 2013

So recently I started making something in Inventor, and like most programs you can press the middle mouse button and it will pan or orbit. Well I'm pretty sure that in the past if I pressed the middle mpuse button it would pan or orbit. But now it is zooming all for the model, and only when it is zoomed to the whole model does it let me pan or rotate. If I were to zoom in on a line for example and wanted to pan to the right, it zooms me out to the whole model, and then I can pan. I have tried multiple mouse buttona all combinations of shift ctrl and alt and middle mosue, but nothing is working. How can I make it so it does not zoom all when clicking the middle mouse?

View 1 Replies View Related

AutoCAD 2010 :: How To Set Mouse Middle And Right Button

Jul 25, 2013

When I click right mouse button, it shows menu like below picture.

But i want to set menu like this.

View 5 Replies View Related

AutoCAD 2013 :: Shift And Middle Mouse Button Not Working?

Nov 3, 2012

I haven't been able to use the 3D orbiting shortcut since yesterday. I'm using a wireless Microsoft Mouse and keyboard instead of the inbuilt mouse & keyboard on my laptop (which don't seem to be executing the command either).

Up until yesterday I never had any problems orbiting the view.

View 5 Replies View Related

AutoCAD 2013 :: Pan And Zoom With Middle Mouse Button Slower Than Command

Jul 9, 2013

On some computers with AutoCAD 2013 SP2, pan and zoom launched with the middle mouse button is significantly slower than pan and zoom performed by launching the PAN or ZOOM command on the command line.

View 7 Replies View Related

AutoCAD 2013 :: Disable Middle Mouse Button Zoom To Extents?

Dec 26, 2013

The double middle mouse button click command. I use the middle mouse button to pan, but if I pan too quickly, it interprets it as a double-click and zooms all the way out. I tried changing the double click speed in my mouse settings but that didn't work. I feel like there should be something in the shortcut settings I can change?

View 1 Replies View Related

3ds Max :: Middle Mouse Button Settings?

Sep 19, 2013

3d Max Design 2013.  I'm having issues right off the bat with my mouse, especially the middle mouse button.  During the tutorial videos, we're instructed that using the MMB with the Ctrl, Alt, or combination there of, a hand icon will appear and certain movements will occur.  My mouse is not behaving in this manner.  I am wondering if there is a certain setting within windows I need to set the MMB, specifically for this program, since the default setting doesn't seem to work. 

View 7 Replies View Related

AutoCAD Architecture :: Updated Logitech Mouse Software - Middle Button Pan Not Working Now

Oct 28, 2010

I have a Logitech MX 600 cordless mouse. I just updated the SetPoint software as I got a new cordless keyboard. Now, the middle button pan is erratically working. None of the settings has changed. MBUTTONPAN is set to 1. Middle button is still set to "Middle Button."

Sometimes the pan works. Most of the time it doesn't. If there are new setting on the SetPoint software I need to check or uncheck? I've even tried messing with some CUI settings under the mouse component...

View 5 Replies View Related

Revit :: Orbit On Middle Mouse Button?

Sep 16, 2013

I need to be able to work back and forth with sketchup, and revit. Unfortunatly the orbit and pan commands in revit are the exact opposite of sketchup( mmb = pan in revit) (mmb = orbit in sketchup) (shift + mmb = orbit in revit) (shift + mmb = pan in sketch up) 
 
these commands are ingrained in my muscule memory and going back and forth is like writing one sentnce with your left hand and the next with your right. it is totally dibilitating. 
 
Is there any way to customize these in revit? Can i change the MMB to be orbit and shift+MMB to be pan ? 

View 1 Replies View Related

Photoshop :: Mouse Middle Button = Spacebar Panning?

Jul 6, 2008

How about add this feature to Photoshop?

Hold down mouse middle button = hold down spacebar panning?

View 5 Replies View Related

Maya :: Middle Mouse Button In Node Editor

Aug 3, 2013

If there is a way to change the behavior of the middle mouse button in the Node Editor so that by default it moves the panel without needing to press the Alt key? 

Ideally I'd like to swap the behavior of pressing the Alt Key + Middle Mouse with just the Middle Mouse.

View 1 Replies View Related

AutoCAD 2010 :: Middle Mouse Button (wheel) Set To Zoom All / Zoom Extents Double Click

Feb 27, 2013

I am working on getting some settings done, moving from 2008 to 2012. How do you set the Middle Mouse Button (wheel) to either Zoom All or Zoom Extents when you double click it?  I thought it was set in the Main CUI file.

View 9 Replies View Related

AutoCAD Inventor :: Print PDF File To Rotate Model

Jun 7, 2012

I have to  print PDF file of model And this PDF file should have access to rotate model as we do in inventor.  I came across such file few days ago. I tried in inventor it I could not do.

(# Ref attachment of PDF file having access to rotate model)

I made PDF file but that doesn't,t have access to rotate as first one has. ( # ref  2 ND attachment.)

View 2 Replies View Related

AutoCad :: Unable To Use Middle Button

May 16, 2006

I have a Microsoft wireless notebook laser mouse 6000 and I can not pan using the middle button for some reason. I have tried to change the variable in the MBUTTONPAN command from 0 to 1 and it made no difference.

View 4 Replies View Related

AutoCAD 2010 :: Put Ribbon Button In Middle Of Panel

Oct 23, 2013

I am new to creating ribbons.Is there any way to put two vertical ribbon button just in the middle of the panel? Is it possible to align Ribbon Buttons? Or changing properties of ribbon buttons like font size?

This is part of my code that creating two vertical buttons in a panel,but unfortunately they aren't  align.
 
 Dim ribbonbutton5 As New RibbonButton()
        ribbonbutton5.Text = "Detail"
        ribbonbutton5.ShowText = True
        ribbonbutton5.ShowImage = True
        ribbonbutton5.LargeImage = getBitmap(My.Resources.Rib_32)
        ribbonbutton5.Image = getBitmap(My.Resources.Rib_16)

[code]....

View 1 Replies View Related

3ds Max :: Slow Zoom On Middle Mouse

Feb 13, 2012

How come the zoom on middle mouse reacts so slowly compared to using the zoom icon (magnifier) ? its slow, clunky and takes a moment to get going, it also has zoom limits which the magnifier does n`t.

View 2 Replies View Related

Paint.NET :: Middle Mouse Click As Eye Dropper

Mar 18, 2012

Similar to how Minecraft allows you to select the block your cursor is over via middle mouse click,

wouldn't it be intuitive to make the eye dropper/color selector bound to the middle mouse button?

As far as I can tell, a middle mouse click does nothing in PDN right now and when I tested to see if this feature was already implemented, it just felt right to me.

So I say follow in Notch's footsteps with the middle mouse button, afterall he himself advocated PDN on his blog for creating games

View 3 Replies View Related

AutoCAD 2010 :: Rotate 3D Model In Model Space?

Apr 13, 2012

Basically I've got a detail specific to my design, I've extruded all of the layers up to their desired levels etc, but now I want to be able to rotate it all so that instead of these layers being orientated vertically, they are orientated horizontally, if that makes sense. I understand that there is something involved with the UCS but I'm not sure how to get this to work. This may be an issue with my computer as I know my laptop graphics card is pretty rubbish and impacts a lot of 3d programs such as Rhino and SketchUp so this could be the issue here

View 2 Replies View Related

Maya :: Can't Reorder Nodes In The Outliner By Middle-mouse Click

Jul 19, 2012

Just installed Maya 2013 and can't seem to reorder objects in the outliner with the usual middle click drag.

Have to click several times on the name and try again until eventually it does it.

View 2 Replies View Related

GIMP :: How To Change Zoom In And Out Behavior Of Middle Mouse Wheel

Apr 4, 2012

How to change the zoom in and out behaviour of the middle mouse wheel in Windows GIMP to work without having to press the ^ (control) button on the keyboard? I'm using to zooming in and out using just the mouse wheel alone and hoping that a setting in GIMP could be changed so that it also works without pressing the ^ (control) button at the same time.

I've googled this along with a few other things over last couple of days but no luck. Can this be done?

View 2 Replies View Related

AutoCAD Visual LISP / AutoLISP :: One Button Changing Text Base Point To Be Middle Center

Aug 23, 2011

how to make a toolbar button so that when i click it and select a few single text, it will automatically change the text base point to be at "MIDDLE CENTER"....

At the moment, i use to create a button with macro of  " ^C^C_text;j;mc "....But the problem is whenever i use this button, i still need to type "MC" at the command prompt.. How to make it so that after i click the button, all i need to to is just select the text..

View 9 Replies View Related

Photoshop :: Button With Middle White/reflection..outerhighlight

Mar 31, 2009

how the button has the middle reflective quality..also the border is a darker color of the actual button color.

View 1 Replies View Related

AutoCAD LT :: How To Change Mouse Button Assignments

Feb 22, 2012

Logitech M305 - 3-button mounse (Left/Right/Center wheel) Center Wheel may be rotated or pressed for 2 separate functions.  When rotated, does scrolling, when pressed USED TO PAN.  Now, for some reason it's changed to zoom.

How do I change the middle wheel, when pressed from Zoom to pan.  I looked within the help desk and there is informaion on Macros and other commands, can't really understand that, but just simply need to get it back to the PAN command. 

View 1 Replies View Related

AutoCAD 2010 :: Scroll Button On Mouse Will Not Pan

Jan 30, 2010

I just installed Autocad 2010 student, and now my microsoft wireless mouse 4000 will not pan when I press the scroll button. I have read a few older post that talk about Mbuttons but I can't find how to change my Mbutton from 0 to 1 or whatever it is supposed to be.

View 9 Replies View Related

AutoCad :: Adding Pan Function To A Mouse Button

Oct 5, 2011

I have a Logitech mouse that uses Set Point. I would like the sideways function of my wheel to function as Pan. In Acads CUI there is a list of ten buttons which different functions. How do I know which button is which? None of them have Pan by default, so how can I add it to a specific button?

View 1 Replies View Related

Photoshop :: Middle Button On Wacom Pen Kills Paint Tool

Nov 19, 2013

I've been having this problem for a while with Photoshop and my Wacom pen... 
 
I'll be painting and I'll bump the middle button on my wacom pen and I'll get the circle of circles that spins forever... until I force quit.  It's so cumbersome.  I have my middle button mapped to the middle mouse click. 
 
I use a mac and currently on CC.  I have an intuos 5 but It used to happen to my three too. It's been less of a problem lately because of the crash recovery feature but it's still a huge problem...Like if there was an auto save feature or something then I'd be less frustrated.
 
I seem to have trouble articulating what's going on as well because all I get back is...  did you update the drivers?  it must be a wacom issue.  try an update... etc. 
 
The wheel spins but the pen still draws...  like...  FML

View 1 Replies View Related

AutoCAD 2010 :: Viewport In Model Space Middle Line Between Disappear

Aug 9, 2012

I use IN MODEL SPACE command:

view/ viewports/  two viewports (horizontal or vertical)

just ordinary split window in model space.

I found out that is missing line between viewports. I am looking in options but there is nothing.

Which command or system variable it is???

View 2 Replies View Related

AutoCAD 2010 :: Allow Right Click Mouse Button To Function Of F3 Key?

Mar 16, 2012

how to allow my right click mouse button to the function of the F3 key? I want to be able to draw, move, copy or whatever and mid-command be able to right click (on or off) the snap that are assigned to F3.

View 1 Replies View Related

AutoCad :: Create Shortcut For Mouse Left-click Button On Keyboard?

Aug 1, 2013

Is there a way to create a shortcut for mouse left-click button on the keyboard?

View 8 Replies View Related

AutoCAD Inventor :: Turn Off Mouse Function When Mouse Cursor Moves Over A Feature?

Apr 12, 2013

how to turn off the mouse function when the mouse cursor moves over a feature, such as an edge, point, or surface, and highlights it. I don't want it highlighting the features automatically. I want it to highlight once I click over a feature. My colleagues and I are very distraught by this feature, and will be discontinuing our use of your products that do not allow us to turn this feature off. I'm not sure why you'd want to weed your customer base like this, assuming that I can't turn this option off from the research I've done pouring through the hundreds of complaints related to this issue. I haven't been able to find any posts recently, or regarding Inventor 2013 specificially on this issue, so I was hoping this version had the option of turning it off. Does any of Autodesk's software, such as AutoCAD, have the option of turning it off?

View 5 Replies View Related

AutoCAD Architecture :: Inactive Snap Shortcut Menu (shift + Right Mouse Button)?

Nov 6, 2012

I have an inactive snap shortcut menu. When clicking shift + right mouse button the menu appears but when I typet

"E" for "ENDpoint",  "M" for "Midpoint" or when I just click over the respective icons in the menu nothing really happens and I get the following message in the command bar:

"Command: _endp Unknown command "ENDP".  Press F1 for help."

or 

"Command: _mid Unknown command "MID".  Press F1 for help."

I tried following, none of which worked:

1. resetting the main customization file ACA_Global.cuix

2. switching between different profiles and cuix files

3. reinstalling Autocad Architecture 2013

4. uninstalling and Installing Autocad Architecture 2013 service pack 1

5. installing older versions of Autocad (2008 and Architecture 2012)

6. reinstalling Windows 7 and installing Autocad Architecture 2013 again

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved