I have a Microsoft wireless notebook laser mouse 6000 and I can not pan using the middle button for some reason. I have tried to change the variable in the MBUTTONPAN command from 0 to 1 and it made no difference.
View 4 RepliesWhen I click right mouse button, it shows menu like below picture.
But i want to set menu like this.
I am new to creating ribbons.Is there any way to put two vertical ribbon button just in the middle of the panel? Is it possible to align Ribbon Buttons? Or changing properties of ribbon buttons like font size?
This is part of my code that creating two vertical buttons in a panel,but unfortunately they aren't align.
Dim ribbonbutton5 As New RibbonButton()
ribbonbutton5.Text = "Detail"
ribbonbutton5.ShowText = True
ribbonbutton5.ShowImage = True
ribbonbutton5.LargeImage = getBitmap(My.Resources.Rib_32)
ribbonbutton5.Image = getBitmap(My.Resources.Rib_16)
[code]....
I haven't been able to use the 3D orbiting shortcut since yesterday. I'm using a wireless Microsoft Mouse and keyboard instead of the inbuilt mouse & keyboard on my laptop (which don't seem to be executing the command either).
Up until yesterday I never had any problems orbiting the view.
I've been researching this all day and I can't find anything that works for me. Is there a way to change the middle mouse button from "Pan" to "Rotate" my model? Currently, I hold "Shift" while holding down the middle mouse button and that rotates my model. Can I incorporate that into my middle mouse button somehow without having to buy a 3D Connexion mouse?
View 9 Replies View RelatedSo recently I started making something in Inventor, and like most programs you can press the middle mouse button and it will pan or orbit. Well I'm pretty sure that in the past if I pressed the middle mpuse button it would pan or orbit. But now it is zooming all for the model, and only when it is zoomed to the whole model does it let me pan or rotate. If I were to zoom in on a line for example and wanted to pan to the right, it zooms me out to the whole model, and then I can pan. I have tried multiple mouse buttona all combinations of shift ctrl and alt and middle mosue, but nothing is working. How can I make it so it does not zoom all when clicking the middle mouse?
View 1 Replies View RelatedOn some computers with AutoCAD 2013 SP2, pan and zoom launched with the middle mouse button is significantly slower than pan and zoom performed by launching the PAN or ZOOM command on the command line.
View 7 Replies View RelatedThe double middle mouse button click command. I use the middle mouse button to pan, but if I pan too quickly, it interprets it as a double-click and zooms all the way out. I tried changing the double click speed in my mouse settings but that didn't work. I feel like there should be something in the shortcut settings I can change?
View 1 Replies View RelatedI have a Logitech MX 600 cordless mouse. I just updated the SetPoint software as I got a new cordless keyboard. Now, the middle button pan is erratically working. None of the settings has changed. MBUTTONPAN is set to 1. Middle button is still set to "Middle Button."
Sometimes the pan works. Most of the time it doesn't. If there are new setting on the SetPoint software I need to check or uncheck? I've even tried messing with some CUI settings under the mouse component...
3d Max Design 2013. I'm having issues right off the bat with my mouse, especially the middle mouse button. During the tutorial videos, we're instructed that using the MMB with the Ctrl, Alt, or combination there of, a hand icon will appear and certain movements will occur. My mouse is not behaving in this manner. I am wondering if there is a certain setting within windows I need to set the MMB, specifically for this program, since the default setting doesn't seem to work.
View 7 Replies View Relatedhow to make a toolbar button so that when i click it and select a few single text, it will automatically change the text base point to be at "MIDDLE CENTER"....
At the moment, i use to create a button with macro of " ^C^C_text;j;mc "....But the problem is whenever i use this button, i still need to type "MC" at the command prompt.. How to make it so that after i click the button, all i need to to is just select the text..
I need to be able to work back and forth with sketchup, and revit. Unfortunatly the orbit and pan commands in revit are the exact opposite of sketchup( mmb = pan in revit) (mmb = orbit in sketchup) (shift + mmb = orbit in revit) (shift + mmb = pan in sketch up)
these commands are ingrained in my muscule memory and going back and forth is like writing one sentnce with your left hand and the next with your right. it is totally dibilitating.
Is there any way to customize these in revit? Can i change the MMB to be orbit and shift+MMB to be pan ?
how the button has the middle reflective quality..also the border is a darker color of the actual button color.
View 1 Replies View RelatedHow about add this feature to Photoshop?
Hold down mouse middle button = hold down spacebar panning?
If there is a way to change the behavior of the middle mouse button in the Node Editor so that by default it moves the panel without needing to press the Alt key?
Ideally I'd like to swap the behavior of pressing the Alt Key + Middle Mouse with just the Middle Mouse.
I've been having this problem for a while with Photoshop and my Wacom pen...
I'll be painting and I'll bump the middle button on my wacom pen and I'll get the circle of circles that spins forever... until I force quit. It's so cumbersome. I have my middle button mapped to the middle mouse click.
I use a mac and currently on CC. I have an intuos 5 but It used to happen to my three too. It's been less of a problem lately because of the crash recovery feature but it's still a huge problem...Like if there was an auto save feature or something then I'd be less frustrated.
I seem to have trouble articulating what's going on as well because all I get back is... did you update the drivers? it must be a wacom issue. try an update... etc.
The wheel spins but the pen still draws... like... FML
I am working on getting some settings done, moving from 2008 to 2012. How do you set the Middle Mouse Button (wheel) to either Zoom All or Zoom Extents when you double click it? I thought it was set in the Main CUI file.
View 9 Replies View RelatedFor some reason, I'm not able to get my Mask Mode button "turned on" -- the Help section pointed to "Window > Mask mode on" -- but even though a shape / object / photo is selected, mask features always remain unavailable.
View 2 Replies View RelatedI want to install Photoshop Elements 6 on my new computer and deactivate/uninstall it from my old computer. I have been unable to find the "deactivate" button under "help" or anywhere else.
View 2 Replies View RelatedGave up on Photoshop. Website too hard to navigate. No download button on Photoshop Elements for either the trial or buy version. If this is the way the website works, I don't want the program even though I understand Photoshop is supposed to be the best.
View 9 Replies View RelatedFirst I lost some folders and edits; now the import button hangs up and I am unable to move forward. HP Pavillion quad core and lightroom 4
View 2 Replies View Relatedi'm running Elements 8 on an Apple Mac running OS X 10.9.1
I'm unable to find any button on the toolbar to open Organiser. So how do I access it?
I am growing increasinly frustrated. I just installed AutoCAD LT 2013 on my laptop. I managed to get everything customized the way I want, except the button icons on my (classic) toolbar are much too small. If I go into the menu and select 'use large icons', they are too huge. My screen resolution DOES NOT need to be changed or adjusted. I went to the help menu to see what I can do, and found that I can go into CUI and adjust the size of the button icons that way, via the button image editor, however there is no 'button image editor' dialog box when I select any given toolbar command.
View 1 Replies View RelatedI have a .psd file that was created by someone else for my friends web page. The psd file is the background, logo, and navigational bar for her home page. Each button is a "slice" I think because there are lines around each button on the left side navigational bar (not a true navigational bar just created by buttons) and around the head and body etc. (The lines are blue if that tells you anything - each section is numbered with a little tiny icon that looks a little like the back of an envelope.)
My question - we wanted to change the word on one of the buttons - I did that saved the psd file - no problem. Then I cropped out the button that we had changed. When I saved it to the web (as a jpg) the button looks like a button (a box around it - not a line a raised area that looks like a button.) The other buttons do NOT look like a button (even though the layers are named buttons.)
How can I change it so it looks flat (not button like) like all of the rest of the items on the navigational bar.
As default the Wacom pen top button acts as the right button. Is there a way to assign the right button to the bottom button?
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
is there any entity stutas for selecting?like use mouse select? But do'nt use mouse to select.
View 1 Replies View RelatedI have a part which is lets say 10ft long. Now I need to modify that to be 9.5ft. Is there a simple way to remove that .5ft from the center of the part?
I just need a way to cut out a .5ft section in the middle and then put the two remaining pieces back together. Doing this would be much easier than editing the sketches for the part, especially since I may have to change the amount that is cut out and that would change the number of holes and features.
Attached is a picture of the parts i have to edit and some lines to show the section that needs to get removed.
Out of the blue, my zoom on my middle wheel slowed down. So, now I have to spin my wheel at least 20 more times when I zoom in. The problem only occurs in Civil 3D not any other programs. How to fix my zoom?
View 2 Replies View RelatedWe have several tool palettes that I use all the time. And every time I close down AutoCAD and open it back up, all the palettes load back up in the middle of my left monitor (dual monitor set up). I typically have my AutoCAD window open on the left monitor, and my palettes on the right monitor.
I have tried to save my profile, lock all Toolbar/Palette positions.....and nothing has any affect. My palettes always load in the middle of my left monitor.
I tried loading the latest graphics drivers, no affect.
I have a series of polygons for a dataset that I need to export as an SDF. One of these polygons has a hole in the middle which I need to preserve. If I export it as it is, then I will get two polygons, one inside the other that will sit one on top of the other.
View 2 Replies View RelatedIs there any way to dimension my features, whether it's a sketch or using the hole feature, to either the middle of my part or to a middle plane I have?
I am wanting a group of tapped holes to be the same from the middle of my part, regardless of what the overall size of the part is. How can I dimension like this?