I have a series of polygons for a dataset that I need to export as an SDF. One of these polygons has a hole in the middle which I need to preserve. If I export it as it is, then I will get two polygons, one inside the other that will sit one on top of the other.
View 2 RepliesI have a polygon with a hole in it. I want to export this exterior polygon to a shapefile. I want the shape file to display as a "donut" if you get my meaning. The shape keeps coming in completely hatched ignoring the island within. Is there a way to do this with the 2008 software?
View 9 Replies View RelatedI am building some geometry and need to fill in this area, (ie fill hole with polygons then clean up with split polygon tool) but I am new to nurbs and am trying to do this model with nurbs. I usually use hull mode and move the hull down into the piece of geometry, but it won't move correctly that way.
So in the picture below i am trying to fill the red area and have it go into the green surface. The curvature of the green area makes it not line up correctly(ie fitting to the curvature of the green surface) when using the "moving hulls" approach. I was seeing if there was an easy way to go about this.
See the image below. When I export or print to pdf, the vertices of the polygons (shape file data) are visible, resulting in a poor quality final image. Is there a way to get these polygons to export to pdf without the vertices showing up? Obviously, I would prefer a clean, solid polygon hatch.
View 6 Replies View RelatedI have a series of polylines with a global width of 5m which I want to export to a polygon shapefile to represent in GIS. I realised if I create a shapefile of the polylines and then create a buffer of 2.5m on either side I can create my desired polygon. My question is how do I export this polygon to a shapefile. I have tried bulk copy but this just seems to revert the buffer back to a polyline shapefile .
View 4 Replies View RelatedI want to export some polygon shp files into CAD. What I can do easily is determine the line types, colors etc in the export but what I want to to is set the fill. Now I can't see how this is possible as the polygon features are converted to closed polylines in CAD and the hatch is a new feature.
View 1 Replies View RelatedIt is possible to export only the surface of a solid in the form of a polygon for arcmap?
View 2 Replies View RelatedIs there a setting for extruding polygons so it doesnt leave the original polygon.
When i extrude a polygon into a 3D solid, it extrudes fine but it also keeps the original polygon which means i have to delete it?
Here is what I am doing...
1) I have a transparent .png
2) I select the .png as an object
3) I assign this object a url and alt comment using the internet tool bar or the object properties dialog
4) I define the area as polygon
5) I Export For Web
6) Under HTML and Slices I Export image and HTML
7) I Save as... my .png image
8) It produce an html file with my image, but no hyperlinking or image mapping...
<html>
<head>
<title>image</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
<meta http-equiv="Content-Script-Type" content="text/javascript"/>
<meta name="Generator" content="Corel PHOTO-PAINT 15.1"/>
</head>
<body bgcolor="#FFFFFF">
<img border="0" width="500" height="500" src="image.png">
</body>
</html>
I used to draw battleships in CorelDRAW3 when I was a kid.
I've got a template with a set of Object defaults for an Inch drawing and a set for a Metric drawing. I've just noticed that within my metric set, if I insert a hole table with tapped holes, the font on the tapped holes doesn't match the other hole types. I'm searched around, but all the settings for the hole table style reference the same text style. (Please see the attached image.)
So is there a way to set a certain hole type to have a certain font or size within a hole table? Because if there is, I'd obviously like to remove it..... But I can't seem to figure out where the issue is.
I am trying to add a hole to an existing hole chart. I drop the part into a new drawing, set the ordinate "zero", and add a hole chart by selecting a few holes. When I attempt to edit the chart: click chart, right click "edit", click add hole, select new holes, right click to create, the "create" selection is greyed out and all I have to choose from is cancel. I searched the forum here but could not find a reference to this a know issue. Am I doing something wrong or is this a glitch of 2013.
We are running win7 x64 machines and this happens on both the 2013 Ultimate and Premium editions of the product.
I have had this problem intermittently for a few weeks since going to Inventor 2013 SP1.1. I have a part within an assembly and that part has holes created in it before assembling it with other parts. Now when I try and create a hole table in a drawing of the assembly I cannot select hole edges and the hole table is blank when trying to create it automatically from view selection. I originally thought it may be an alignment issue but I have since aligned everything correctly and it still persists. I can create the hole table if I import in just the part into the drawing but it will not allow me to create the table on the whole assembly.
I can also create the hole table if I use "centred pattern" and create cross hairs on all of the holes however it does not give me correct annotations for the holes as shown in attachment and I can manually change the annotations but seriously this should not be required. As shown in the screen shot it reads as A1 down to K1 instead of A1 to A10. .
Question: Is it possible to control the Hole Dimensions called out on the Hole Chart? As in controling leading/trailing zeros for main hole dim, alt home dim and tolerances? Can you combine the Main Dim with the Alt dim in a single column, separated with parentheses? (same with tolerance?)
View 5 Replies View RelatedI would like to use the hole command to place a hole in a part. When I place the hole it won't allow me to use one of the origin planes to locate the hole from. Can I only locate holes off edges?
View 4 Replies View RelatedI have an assembly that contains a part and a hole feature (the hole feature is at the assembly level). Using the api, I'm trying to get the hole location relative to the part's coordinate system in a without using the holeplacementdefinition.distance property, this way I can get the hole location regardless of the way it was defined.
View 2 Replies View Relatedi use hole feature names in hole table.
i assign hole names attribute to hole feature but dont get attribute hole table.
how to get hole names in hole table.
While creating holes in a part, a small counter shows (when you click on a point) of how many holes there are.
Programs:
Solidworks (1998-2011)
Autodesk Inventor (R8 - 2013)
Autodesk AutoCad 2D
Autodesk AutoCad 3D
Catia V5
SolidEdge
Anvil (Very old program!)
Pro/E
I'm currently working on a project that requires modelling in revit but exporting the final drawings in Autocad format. As a requirement from my client, I am demanded to export the entire paper space into the model space as Autocad entities.
When I export the drawing, the composition that I model in Revit is shown in the paper space, Is there a way to automatically export this composition into the model space?
with the Genio Exporter. I need to export the surface triangles from my job, but the Genio export dialouge box only gives me the option to export suface boundaries.
View 4 Replies View RelatedI use quite heavy Luminance noise reduction on my images as they are shot at very high speed ISO...
I adjust this in L4, picture in preview looks as smooth as a babies bottom and perfect...
I then export as a TIF file at Adobe 1998 and when I open it in Photoshop 5 the image is really noisy like I've not done the adjustments at all...
I use a 17inch Macbook Pro with the lastest operating system, this is the second performace issue over the last few week (problems with LB too)...I export my files manually using a card reader as RAW files, from a Canon 5D Mark 3...
Is it worth re-installing?
How do you control the image export sequence when exporting to DVD via LR4?
View 7 Replies View RelatedExporting collections to external file only allows export as a jpeg and Not the original file types?
View 5 Replies View RelatedI'v seen for exporting a path to illustrator, they mention the File>Export>Export Paths to Illustrator option. When I look under "Export", the only options I get are:
Data sets as files...
Render Video...
Zoomify
I can still drag/cut/paste the path into Illustrator, so I haven't been stopped, but why the export option isn't showing up?
I imported some pictures into LIghtroom 5 with the SAME jpg numbers as a prior import. The first import consisted of pictures from Trip 1 folder on my hard drive, the second import was from Trip 2 folder on hard drive. I see the Trip 1 and Trip 2 folders in LIghtroom 5, but am experiencing problems with emailing and exporting pictures, getting messages such as "Missing file" or "Export does not show up. Were there problems with the import?
View 1 Replies View RelatedI have recently upgraded from corel 12 to X6. I work in SignLab e6 on my production computer. Now since I have upgraded when I export files from x6 and import them into SignLab e6 they will not import unless I change everything to 1 color. If it does export the file as full color, when I import the file it is converted to 1 color. This takes a lot of time to re color everything. I typically have to export files from Corel as .EPS in order for the file to import into Signlab with best quality, but have been using the CMX (legacy) lately with same results. I dont understand why I have to convert them into 1 color nor why they convert from full color to 1 color.
View 10 Replies View RelatedI have a Microsoft wireless notebook laser mouse 6000 and I can not pan using the middle button for some reason. I have tried to change the variable in the MBUTTONPAN command from 0 to 1 and it made no difference.
View 4 Replies View RelatedHow to split polygon?I am using "bpoly" function when I split the polygon but It's inconvenient. Any better way to split polygons?I go over the functions through help desk.
View 5 Replies View RelatedLike as the image, there are dividing lines(yellow) in a region (red). How can I get each type of polygon with VBA?
View 8 Replies View RelatedIf you have several lots consisting of separate polyline for each side of the lot, whats the best way to convert those into polygons, so I convert to a shp file.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
is there any entity stutas for selecting?like use mouse select? But do'nt use mouse to select.
View 1 Replies View RelatedI have a part which is lets say 10ft long. Now I need to modify that to be 9.5ft. Is there a simple way to remove that .5ft from the center of the part?
I just need a way to cut out a .5ft section in the middle and then put the two remaining pieces back together. Doing this would be much easier than editing the sketches for the part, especially since I may have to change the amount that is cut out and that would change the number of holes and features.
Attached is a picture of the parts i have to edit and some lines to show the section that needs to get removed.