I have a Logitech mouse that uses Set Point. I would like the sideways function of my wheel to function as Pan. In Acads CUI there is a list of ten buttons which different functions. How do I know which button is which? None of them have Pan by default, so how can I add it to a specific button?
View 1 Replies
how to allow my right click mouse button to the function of the F3 key? I want to be able to draw, move, copy or whatever and mid-command be able to right click (on or off) the snap that are assigned to F3.
View 1 Replies View Relatedhow to make the right mouse button function with a Wacom Pen? I mean, want to use the context menus with the pen. Mine doesnt seem to work.
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
how to turn off the mouse function when the mouse cursor moves over a feature, such as an edge, point, or surface, and highlights it. I don't want it highlighting the features automatically. I want it to highlight once I click over a feature. My colleagues and I are very distraught by this feature, and will be discontinuing our use of your products that do not allow us to turn this feature off. I'm not sure why you'd want to weed your customer base like this, assuming that I can't turn this option off from the research I've done pouring through the hundreds of complaints related to this issue. I haven't been able to find any posts recently, or regarding Inventor 2013 specificially on this issue, so I was hoping this version had the option of turning it off. Does any of Autodesk's software, such as AutoCAD, have the option of turning it off?
View 5 Replies View RelatedLogitech M305 - 3-button mounse (Left/Right/Center wheel) Center Wheel may be rotated or pressed for 2 separate functions. When rotated, does scrolling, when pressed USED TO PAN. Now, for some reason it's changed to zoom.
How do I change the middle wheel, when pressed from Zoom to pan. I looked within the help desk and there is informaion on Macros and other commands, can't really understand that, but just simply need to get it back to the PAN command.
I just installed Autocad 2010 student, and now my microsoft wireless mouse 4000 will not pan when I press the scroll button. I have read a few older post that talk about Mbuttons but I can't find how to change my Mbutton from 0 to 1 or whatever it is supposed to be.
View 9 Replies View RelatedWhen I click right mouse button, it shows menu like below picture.
But i want to set menu like this.
I haven't been able to use the 3D orbiting shortcut since yesterday. I'm using a wireless Microsoft Mouse and keyboard instead of the inbuilt mouse & keyboard on my laptop (which don't seem to be executing the command either).
Up until yesterday I never had any problems orbiting the view.
I've been researching this all day and I can't find anything that works for me. Is there a way to change the middle mouse button from "Pan" to "Rotate" my model? Currently, I hold "Shift" while holding down the middle mouse button and that rotates my model. Can I incorporate that into my middle mouse button somehow without having to buy a 3D Connexion mouse?
View 9 Replies View RelatedSo recently I started making something in Inventor, and like most programs you can press the middle mouse button and it will pan or orbit. Well I'm pretty sure that in the past if I pressed the middle mpuse button it would pan or orbit. But now it is zooming all for the model, and only when it is zoomed to the whole model does it let me pan or rotate. If I were to zoom in on a line for example and wanted to pan to the right, it zooms me out to the whole model, and then I can pan. I have tried multiple mouse buttona all combinations of shift ctrl and alt and middle mosue, but nothing is working. How can I make it so it does not zoom all when clicking the middle mouse?
View 1 Replies View Relatedi have problem with pan function, it doesn't work on scroll button, i have windows 7 (64 bit), microsoft wireless mobile mouse 4000 and autocad 2011, i have downloaded new software for mouse and changed wheel button to middle click and i have changed mbuttonpan to 1 in autocad, still not working.
View 1 Replies View RelatedOn some computers with AutoCAD 2013 SP2, pan and zoom launched with the middle mouse button is significantly slower than pan and zoom performed by launching the PAN or ZOOM command on the command line.
View 7 Replies View RelatedThe double middle mouse button click command. I use the middle mouse button to pan, but if I pan too quickly, it interprets it as a double-click and zooms all the way out. I tried changing the double click speed in my mouse settings but that didn't work. I feel like there should be something in the shortcut settings I can change?
View 1 Replies View RelatedIs there a way to create a shortcut for mouse left-click button on the keyboard?
View 8 Replies View RelatedI have an inactive snap shortcut menu. When clicking shift + right mouse button the menu appears but when I typet
"E" for "ENDpoint", "M" for "Midpoint" or when I just click over the respective icons in the menu nothing really happens and I get the following message in the command bar:
"Command: _endp Unknown command "ENDP". Press F1 for help."
or
"Command: _mid Unknown command "MID". Press F1 for help."
I tried following, none of which worked:
1. resetting the main customization file ACA_Global.cuix
2. switching between different profiles and cuix files
3. reinstalling Autocad Architecture 2013
4. uninstalling and Installing Autocad Architecture 2013 service pack 1
5. installing older versions of Autocad (2008 and Architecture 2012)
6. reinstalling Windows 7 and installing Autocad Architecture 2013 again
I have a Logitech MX 600 cordless mouse. I just updated the SetPoint software as I got a new cordless keyboard. Now, the middle button pan is erratically working. None of the settings has changed. MBUTTONPAN is set to 1. Middle button is still set to "Middle Button."
Sometimes the pan works. Most of the time it doesn't. If there are new setting on the SetPoint software I need to check or uncheck? I've even tried messing with some CUI settings under the mouse component...
whenever I left click a tool in the toolbar of 6.01 it gives me the options for the other tools...
Now it should only do this when I right click! It's rather annoying...and I have no idea how to change it back. I did a little snooping in the registry but found nothing.
I'm using CS6 on windows 7-64bit with a keyboard and a mouse. I have a problem with the default functionality of the "Alt" key in windows 7. For those of you that are familiar with the default functionality of the alt key in windows 7, please skip to the next paragraph. For those of you not familiar, pressing the alt key in most programs in windows will highlight the toolbar so that you can use the keyboard to make selections within your "File", "Edit", "View", etc. toolbars if your mouse goes dead.
My problem is that I use the Alt + Mouse Scroll for zoom all the time. I rely on that feature probably more than I should. Yes, I could use cntrl + or cntrl - for zoom but that means I have to take my right hand off my mouse and I use photoshop 8+ hours a day some days. Time is of the essence to complete projects by the deadline.
I've tried disabling the default alt function in windows 7 (didn't work because you can't without third pary openware). I've tried duplicating the shortcut in the Edit - Keyboard Shortcuts menu (didn't work because it doesn't recognize the mouse scroll).
I find it a little hard to use the mouse scroll button for panning and rotating. Often I tend to zoom the scene or in the act of balance the scroll button when pressing it, I don't get the right tool and have to press it again, and that makes it not as intuitive as I would like to. I wounder if it's possible to alter the way I pan and rotate? Can I place the pan and rotate function at the right mouse button? Or is there mouses on the market that have a middle mouse button AND a scroll wheel so I can separate the pan/rotate from the zoom?
View 5 Replies View Related3d Max Design 2013. I'm having issues right off the bat with my mouse, especially the middle mouse button. During the tutorial videos, we're instructed that using the MMB with the Ctrl, Alt, or combination there of, a hand icon will appear and certain movements will occur. My mouse is not behaving in this manner. I am wondering if there is a certain setting within windows I need to set the MMB, specifically for this program, since the default setting doesn't seem to work.
View 7 Replies View RelatedSpecifically, I would like to be able to click and hold my middle mouse button to drag the screen, a la the Hand Tool. Additionally, I'd like scrolling my mouse wheel to zoom in and out, rather than scroll the screen up and down. I know this can be done by holding Spacebar to use the left mouse button to drag the screen, but I'd like to be able to do it with my scroll wheel alone, especially since it doesn't already seem to be filling any other important function.
View 4 Replies View RelatedI never use horizontal and vertical scrolling with the mouse wheel
I always Zoom
But I am forced to hold ALT down every time ...
I want mouse wheel to Zoom by default ...
I'm looking to add a column to my point table that will subtract a fixed number from all my surface elevations. I'm working in 2011 Civil 3D. I've been researching this for the past couple of days and haven't been able to come up with anything solid yet...
View 5 Replies View RelatedIs there a way to configure the mouse button settings in Maya 2012 similar to the Hot Keys editor for configuring key settings? I would like to change the ALT-RMB setting to pan the camera instead of dollying it.
I need this because I have a three button mouse on which the MMB is also a scroll wheel, and whenever I try to click it it always moves and starts dollying the camera view instead of panning the camera view. I can dolly with the scroll wheel so I would like to pan with ALT-RMB. Otherwise I cannot pan at all.
I need to be able to work back and forth with sketchup, and revit. Unfortunatly the orbit and pan commands in revit are the exact opposite of sketchup( mmb = pan in revit) (mmb = orbit in sketchup) (shift + mmb = orbit in revit) (shift + mmb = pan in sketch up)
these commands are ingrained in my muscule memory and going back and forth is like writing one sentnce with your left hand and the next with your right. it is totally dibilitating.
Is there any way to customize these in revit? Can i change the MMB to be orbit and shift+MMB to be pan ?
When holding down the left mouse button in the scroll bar area for just a fraction of a second too long, the scroll bar moves several positions. In the past, it wasn't this touchy. It's so touchy that it's impossible to CONSISTENTLY click once and make the scroll thingy move just one position. In previous versions, it works like a charm. Is there a way to adjust this mouse issue?
I use it on every image for cloning so that I can check one section at a time. For this reason, I've now gone back to CS5, but also because CS6 crashes on me and it sometimes gets stuck on Auto Saving files (possibly because they're big).
some seconds after beginning to work with PsCS6 the menu fields and the right mouse button fields are just white. what can I do? I restartet PS, also the computer... until today it worked without any problems...
View 2 Replies View RelatedI am editing at 100%, with square pixels, and no feather.
EVERY time I release the mouse button in CS6 (fully updated), the Info window shows the marquee dimenstions shrink by either 1 or 2 pixels (and I see the marquee visibly move as well). This make it IMPOSSIBLE to accurately to certain kinds of editing. I have to go back to my old CS3 to be as productive! (Current workaround: edit at 200%... but I can't see all I need that way.)
I am definitely not moving the mouse, because a) it is EVERY time, b) it is never more than 2 pixels, c) it is always a shrink, not an increase, and d) I use a trackpad: my finger is off the pad and no movement is possible, then I let go of the button and the numbers change.
Is there some workaround/fix, or is this just another bug?
How about add this feature to Photoshop?
Hold down mouse middle button = hold down spacebar panning?
Is it still possible in Xara Designer pro V8 to set the right mouse button to choose the line color? Now you get a popup menu if you click the right mousebutton.
View 3 Replies View RelatedIf there is a way to change the behavior of the middle mouse button in the Node Editor so that by default it moves the panel without needing to press the Alt key?
Ideally I'd like to swap the behavior of pressing the Alt Key + Middle Mouse with just the Middle Mouse.
