My mouse has a lot of extra buttons on it, and I've set up Maya to open different marking menus when using those buttons. In order to use those marking menus, I have to hold down the extra button and then left-click. Is there a way I can set up the marking menus to open without left-clicking?
View 1 RepliesHow I can modify this to something closer to the 2011 version. More specifically - I used to use the "camera based selection" option all the time, and would love to have it back... It would be a bonus if modifying the marking menus for specific keys, was as easy for the ones surrounding the hotbox.
View 2 Replies View RelatedI want to assign the viability and open part commands to the marking menu in the presentation environment, but they are always greyed out. They show in the drop down menu below it though??
Screenshot attached. INventor 2013.
If i press RMB on an item form the marking menu it enables to suppress or modify it, but, on 2 computers, the RMB on the item activates it, just like the LMB.
View 1 Replies View RelatedI am trying to update the marking menu for those situations where I am 2D sketching. The change I want to make is to add create feature and create constraint. I don't see how I can add these.there is a way to add more marking menu buttons? 8 buttons are not always enough for my purposes.
View 4 Replies View Related how to control what is loaded into the marking menu and keyboard customization.
I have made my own custom setting for marking menu and keyboard but have had to export it to the desktop and then re-import it inventor start up otherwise I loose all my custom setting.
Is there a folder / file where I can set my cutomized setting and get it to load on inventor start.
Inventor Pro 2014 SP1
Vault Pro 2014
Windows 7 x64
2.53 Xeon
Quadro FX 3800
24GB RAM
The marking menu covers just about every thing I can do... except for one very important thing (well for me anyways). It does not show me the value of the cell when its a function. For example, say that I edit an extrusion whose length is (12+36+11.254-.37). In previous Inventor versions, if I hoovered over this highlighted value, it would show me the resulting value and its name.
Inventor 2013 does not do that. In order to find the value I have to use the arrow keys and scroll through the box and then add it all up. It does not even display the parameter name...like d1, d2 or whatever, like all other Inventor versions did.
I've been forcing myself to accumulate to the new marking menu and gestures system. I'm starting to get used enough to them to see that it's really worth it.
I've found that the defaults are crap for what I do in IV, which is fine because I can customize it to whatever I do use.
However, when I RMB on a component pattern it displays a unique menu for which there appears to be no option for under customization. I'd really like to replace the craptastic useless options with things that I actually use.
By the way, why does AutoDesk neglect component patterns so much?
Marking menu that cuts off the bottom of the screen yet? This is very anoying that on some PC's if clicking somewhere closer to the bottom of the screen a portion of your context meny cuts off. If you click even lower then it jumps to the top but there is an area where it does not work.
View 9 Replies View RelatedThe Marking Menu of 2012 so far is a big brake for me.
I wish I can make some alterations but I did not find in this huge variety of possibilities
the option to alter the context menu of the Sketch.
I am in Sketch. I drawing the line. I want to quit. I do right click and have the menu. the name and probably the sub name of that menu. I cannot find it at all in the Customization list. I wish at least to locate the Escape to bottom. Did not find also the option to turn the Marking menu off.
When i select a tool trough marking menu it loses focus when marking menu disapears, focus is then set back to inventor. We have 3 PC's with inventor here, but only i have this problem. Just started doing this today, i have restarted didnt work, and i have tried the old 2012 version wich works fine...
Very irritable when i start a macro that need keybord input and i have to select the userform again before typing... *angryface*
After I move an image or line of type to where I want it on a Photoshop CS5.1 layer, it moves an extra pixel. It is incredibly annoying and want it to stop before I start screaming. I've turned off all "Snap" and "Snap To" menu items.
View 14 Replies View RelatedI downloaded a webtemplate for Dreamweaver. They have some mouse over buttons that I would like to change. What font did they use? Could someone give some tips? I know Photoshop a bit if that is what is needed. (Guess I don't know PS that well if I can't do it.) I attached both buttons.
View 8 Replies View RelatedAs the topic states, I would like to assign hotkeys to mouse buttons. I attempted to do so, but when I use a mouse button for a hotkey it does not register within the customize user interface menu.
View 3 Replies View RelatedHow can I set up the two side mouse buttons on my Microsoft mouse (used to go back and forward on web pages) to be the Zoom in and Zoom out functions in Photoshop CS?
View 9 Replies View RelatedI have acad 13 installed on an asus laptop. I wanted to do some serious work last night so I plugged in the mouse to the usb port. Doing my usual quick clicking, anytime i was "inside the dwg" like say select or pick a point on the screen, i needed a second pick to do anything. Same with rt click for return. picking a menu item or dropdown or button works fine, "outside the dwg".
Noticed that a slow deliberate click seems to work.I reloaded the asus mouse driver, no dice.I took a 10 year logitech old mouse out, same problem.This problem does not occur using the pointing/click device built into the laptop.Is there something that is looking at the duration of my click in acad? in asus computer ?
I recently had to reinstall LR 4.2 due to a hard drive failure. Previously, I could cycle through my photos by using the forward or reverse buttons on the side ofmy Microsoft mouse. Now I cannot. How can I get LR to respond again? I have set the mouse to 'enable program specific settings'
View 1 Replies View RelatedI purchased an Inland rf 5 button mouse to use for the F4 rotate and F5 view return. The three programmable buttons work in LT and other programs, but not in inventor 5.3. Is there a setting I am missing? I have the latest driver for the mouse installed and as I said it works well in other software.
The mouse vendor says it's Inventor, not the mouse.
I have a Logitech M510 wireless mouse, and it works fine for everything, Firefox horizontally scrolls just fine with the tilt-wheel, and the forward and backward buttons on the mouse function as well. But not in GIMP.
I'm running an HP laptop with Windows 7, and GIMP 2.8.
I tried binding brush size decrease/increase to left/right scroll in the mouse wheel input and nothing happens. Then I restarted GIMP from a terminal with --verbose and told the wheel input to dump events and the only ones printed were scroll up/down. Curious, I enabled the dump for the mouse buttons input as well, and the back/previous buttons also don't generate events.
Because it works fine in other applications and because it generates no events in GIMP
Is there a way to add a keyboard shortcut or marking menu shortcut for visibility? It would be really convenient to be able to shift-click several objects and toggle the visibility of them. I have a mouse with numerous buttons that are mapped to commonly used IV features, but I cannot find a way to map a visibility toggle.
View 9 Replies View Relatedfrom what I understand, mesh cleanup fixes problems with bad geometry. but is there a function by which I can delete all edgeloops in a mesh that don't contribute to the shape? so Maya turns the mesh into as low rez as possible while retaining the shape....
View 2 Replies View Relatedwhenever im in photoshop, and i go to click "Save to Web" or any of the "Filter" options or anything like that, i click it and nothing pops up.... What could be wrong here? all the tool buttons work ok, its just the stuff on menus that dont work. its PSD 7.0, my res settings are 1152x864, and PS 7.0 and Win XP.
View 2 Replies View RelatedI made some menu buttons and they just don't look that great. They are supposed to be stacked and on the left side-about 6 of them. I want to do some rollover effects and stuff- any tips, examples.
View 7 Replies View RelatedNewbie to paint.net and I dabble with making my own DVD menus and wanted to expand my creativeness with making my own buttons and graphic images to use on these DVD menus. DVD menu buttons that look good requires image mask overlays and/or manipulating image and color attributes.
Bottom line question: Does Paint.net have all of the tools needed to create DVD menu buttons, and are there tutorials that explain how-to?
my buttons in my custom shelf disappears when I restart maya. maya has admin privileges and the prefs folder in my documents is not read only and my user account has the privilege to access/write this folder. I'v tried renaming my prefs folder so that maya creates a new pref folder when it starts. that way the shelf works but in that way my other settings are lost.
View 1 Replies View RelatedI'm working on creating a disc menu in VS Pro X4. I've customized several parts of my menu (background, music, text, etc.), but I can't figure out how to change the little highlight icons that appear next to the selected menu options. Is it even possible to customize these?
View 2 Replies View RelatedCan I create popup button control underneath another pop button control?
I can do this with .net controls, but I can't seem to get this to work with Inventor. Whenever I try to add a command bar to another command bar.Controls I get an Invalid Parameter error.
Here is what I am referring to. I would like to be able to add a menu below a menu.
I just downloaded de Maya 2013 bonus tools, and when I use the auto unwrap tool, the buttons that used to cut, select, continue even cancel dont show; but the "click area" still works, the problem is to find it
In Maya 2012, this plugin works fine unfortunately I dont have access to that version anymore.
I wish to report a bug that has been present in x4 and x5 regardless of SP or updates installed. Due to this bug I use X3 as it was the last version that worked for me.
The bug is that several menu buttons on the Edit screen will not display correctly, it is as if the icon is corrupted. This happens with the free trial version as well as with a registered version with updates installed.
See the attached screen shot as it explains this much better.
Computer Specs:
Win XP Pro w/SP3 32bit
ATI video 512M w/latest drivers
2G Ram
240G HDD
Intel 3.01Ghz CPU
X4 & X5 Button Display Bug
I have two menus that I use often and I would like to add them to my mouse buttons. Attached is a picture of the two menus I like and the two buttons. The Shift + Click has the correct menu already (Osnap menu2) my problem is adding my custom menu to the CTRL + Click doesn't work. I labeled Osnap Menu 1 and 2, 1 being the custom menu I have use in the past and 2 being the default osnap menu that comes with the cui file. How to get the second button to read my menu rather than both read the same osnap 2 menu?
View 1 Replies View RelatedHow do I change the menu buttons text label from black to white?
View 2 Replies View Related