I want to make a block with an attribute. But over the attribute I want to make a hatch. So at the place of the hatch the attribute shouldnt be visible. When I make the block AutoCAD puts the attribute on top. Is there a way that the hatch will be on top?
View 2 RepliesI am creating a new block that includes text, lines and a solid object. The block is creating properly, however, the linework is behind the solid object.
How do I control the draworder of the items in the block?
Is there a way to set the order before I create the block, OR do I have to modify the block after I have created it?
I've got hundreds of files to convert.
In VBA, how can I batch convert field attributes in blocks to text attributes while retaining the blocks? Is there a simple way to univerally convert them all at onceusing VBA? The plotted values for the fields must be retained, too.
Explode will not retain the value of the field.
Burst will not work as it explodes the blocks as well.
You can right-click on the field and slelct "Convert to text" from the RCM. So I know that the process exists within CAD, just need to batch the process for a quantity of DWGs at a time - in VBA.
I wanna transfer my attribute block values to another attribute text blocks , is there any lisp for that?
Is there a possibility for sum tag values of choice attribute blocks to inside of another attribute text block ?
I have the same block repeated multiple times in a drawing, and I want to delete the last attribute in all of the specific blocks. When I edit the block in block editor, the attributes do not show up. After I explode the block, there is no text. The attached image shows the properties of the block.
View 9 Replies View Relatedknows a lisp to extract each attribute value from multi-entity single layer blocks to respective different user-named layers? Say tag1 value to layer1, tag2 value to layer2,entity1 to layer-entity1 .The source blocks are all in one layer containing texts and symbols/entities.
[URL]
I have an attribute definition and I need to add its value to an mtext. I added it in mtext insert field it is ok, every thinks work fine it is only needs a regen but it is not a problem.
The problem is when my mtext and att in a block regen does not work in model space, I had to enter block and regen. Is there any way to do it without entrance in block editor?
I attached a simple example.
How do you edit attribute tags (only) and retain the values of the attributes? When I try to redefine a block the attribute values change with ATTSYNC.
View 1 Replies View RelatedUsing Enhanced Attribute Editor one can set attribute text rotation to 0 when the block is rotated. But it must be done for each block individually. Is there a way to do this for several blocks at the same time or globally?
I know making block or text annotative does it but it requires redefining block, something I do not want to do.
I need a rectangle block which on insertion prompts me for some data (name/tag/item number) and then displays it (this I can do). This is al pretty straightforward. But I also want to be able to fill in width and height and then have the block stretch to the correct size. So basically what I think I need is to have the value of a parameter refer to the value of an attribute. I've gotten it to work the other way around, where the attribute displays the size of one side of the rectangle (after stretching and regenerating), but I'd really like to have it working the other way.
View 4 Replies View RelatedI've created a dynamic block with two visibility states. The second state is a copy of the first state, but some of the attribute definitions have been moved, along with some of the geometry.
When I insert the block, then toggle between the two visibility states, the geometry changes as I would expect, but the attributes stay in the position dictated on the first state.
How can I make sure that the attributes move for the second state, as I need them to.
ACAD LT 2006
I have various blocks with a letter assigned to them as a type. Problem is that some blocks are the same one but have a different letter as an attribute.
Is there a way to extract the number of blocks by a different attribute?
making dynamics blocks and more over utilizing the attribute feature but I have discovered some chnages tat i need to make.
My question right now is, once an attribute is created and put into the block editor is that it? Ifi need to edit it can i edit it? I don't really see an option or command right off that would allow me to do this ?
I am trying to set constraints to this block and having some issues. I want to constrain the attribute text so when I stretch the block from the grips the text centers itself automatically within itself. The constraints will not let me pick the grip on the attribute text as a point.
View 2 Replies View RelatedI've built this nifty block for holdowns, but the attributes get all goofy on me when I use the flip command. The problem is that the justification of the attributes does not change when they are flipped - so if I modify the text in the attribute while the block is in the FLIPPED state, how to modify the justification?Check out the attached file to see what I'm talking about. The block instances are numbered so you can follow along:
1. block is inserted
2. attribute text is modified in NOT FLIPPED state - everything is dandy
3. block is flipped
4. attribute text is modified in FLIPPED state - text justification is jacked up
5. block is flipped again, in order to demonstrate the continued jacked-uppedness of the attribute
What I'm trying to do is have a graphic scale with a set list of scales the user can pick from. This was easy using the Visibility Parameter.
However, I want to add a "custom" vis state where, once they select this option, the attributed definition box will pop up and give them the option to input whatever scale they are using.Check out the attached .dwg to see what I've done so far (I just have the attributes on the "custom" vis state).
I have stored a few blocks in our library in 2D. They contain attributes such as detail numbers, elevation/sheet numbers, and side attributes for keynotes. But whenever I drag the blocks in now, instead of prompting for the information to be filled out for the attributes it only asks for insertion point and scale and that's it. it inserts the block but no text shows up, not even a default text. There has to be a setting to turn off or on.
View 4 Replies View RelatedFairly versed with Dynamic blocks here, so the first thing I checked was to make sure that my FIELDEVAL was set to 31 to ensure updates but this one isn't working for me and may be a limitation of the software?
I'm making a dynamic block for my users who aren't familiar with electrical wiring so I am developing a series of blocks for our typical wiring configurations. In this instance, I've setup a pair of attributes to allow the changing of wire color codes and I want to use that single attribute entry to used in multiple other locations that are also connected to that conductor in certain situations. I have setup a field within this block to be the "VALUE" of the object (the attribute) in order to accomplish this. Unfortunately it is only displaying the default value I have for the attribute and will not update either upon insertion of the block or after an edit. Is this beyond the capabilities of Dynamic blocks or do I need to take a different approach?
Find file attached.
I need to create a small table to ID the User, Computer name, Door Key, etc for a floor plan drawing of our office. I'd like to get this done in Excel and link it all so the bldg manager can make changes to the drawing without me. I have created the excel file and created a "name set" in excel for each room. In Autocad 2013 I have inserted a table from a data link and pointed that link to the named range of the room (the named range in excel is an 8 cel block with al the info I need repeated and uniquely named for each room.
This works great...so my next step is to create a block out of the table and make the DATA LINK a variable attribute...that's where I'm stuck. i cannot figure out how to do this. I would love to be able to INSERT BLOCK and have one attribute question...ROOM NUMBER?. That should look to the excel NAMED SET the corresponds and populate the table.
I wanted to get a few opinions regarding exporting data.
We are working with AutoCAD 2013 Vanilla.
We have dynamic blocks with attributes that contain the block Name, Size, Color, material etc...
What is the best way to export the information?
Schedule and linked to a spreadsheet?
(I have experience with schedules but not so much with linking to spreadsheets)
DbConnect? (I know very little on this)
Another way to ask the question;
What is the best way to export the data that I can successfully train 20 designers on how to do it correctly.
So part one is determining the best method,
part two is training a group of designers to use it correctly.
I worked on getting a schedule out and linking to a spreadsheet but even after talking to my reseller support I feel that is too cumbersome. I would like a more streamlined process, you know the one, click here and presto!
I have a attributed block with multiple attributes (called pkey). In some cases these block attributes will the same values save for one, "Total".
example:
pkey #1
Value AA, Value BB, Value CC, Total 20
pkey #2
Value AA, Value BB, Value CC, Total 30
Is there a way by which I can have AutoCad group these blocks together (when extracted into a table for example) and have the SUM of those "Totals" added together to produce a result such as:
Value AA, Value BB, Value CC, Total 50.
I've explored using fields, but I don't think they work in this case, unless I'm using them wrong.
I have found a few things on here, but not exactly what I want. We have a excel spreadsheet with borehole references and coordinates. I need to be able to insert a block according to these coordinates and the borehole reference as the attribute.
View 5 Replies View RelatedI have created a rectangle whose length changes.The value of the paameter "Dist1" is this length field that I associate to the attribute value. Basically, echo length from Dist1 into the attrib value.
The problem is when I insert the block into the drawing the value is shown as "DIST1", even after regen.
Once I pull the grip point to a new length and regen it still shows "DIST1".
If I go into the ddedit and select the edit box (for multiline data field) the shown value will correct itself, but only one time.
If I change the length again, the dimension does not update.
It worked fine when I tested the block but is having issues days later.
I have two visibility states. STATE1 and STATE2 used at attribute .
I only see the first (STATE1) or the default.
Changing the state works fine with objects ( a simple box and circle) but not with the attribute.
Attached is a dynamic block for a civil grid tick. It's my first time creating a dynamic block so it's probably not the most efficent use of the dynamic parameters etc.
I have it setup with 4 visibility states to allow the northing and easting attributes to "rotate" about the center of the grid tick, to give options for readablity and/or text overlap.
What I wanted to add was figure out how to make the individual attributes flip 180 degrees about a point (roughly the center of the attribute). Again this would be for readability.
Why I can't get the attribute to stretch with right hand arrow.
View 2 Replies View RelatedAttached is a block that I use a lot. Originally I had two separate single line text attributes for the "title". I modified it to have a single multiline text attribute instead. I want this attributes text box width to stretch along with the line below it, so that long text strings will automatically adjust to single or multiple lines as necessary and not run off the end of the line. As it stands now I have to stretch the line and then adjust the width of the text box to match.
Also it would be nice if the bulk of the text would stay on the bottom line and only the "overflow" would move up to the next line.
I am using ACAD Civil3d 2014. I have the map utility loaded
I created a drawing for a client and created blocks to represent handholes. They now need to go back to the blocks and add the HH number and fiber size. How can I add to blank att fields to the blocks so that I can send them the drawing and have them enter the information manually?
I searched around and only see solutions for adding attribute labels to the block.
I am very new to dynamic blocks. I am starting off learning the small stuff before I get to the larger more complex blocks to convert to dynamic.
I have a reference block I am trying to "master" all the functions we would like to see.
I have two major concerns.
1) Why can't I rotate this block (via rotate action) and have the attributes stay at angle zero? I thought I built the parameters and actions correct.
2) I haven't ran across anything that explains how to stretch 2 linear parameters at the same time with the same distance (ex: stretch both at .25, .5, .75)
Is there a way to have an attribute dialog box appear when inserting blocks from the tool palette?
View 9 Replies View RelatedI've got a block that I want to scale in pspace, but I would like the attrib height to remain constant even at different scales. I have used annotative blocks in vports with much success, but I would like to do the same thing only in pspace.
View 8 Replies View Related