AutoCAD Dynamic Blocks :: Attribute Not Stretching (Lock Position Is On)
Jul 26, 2011Why I can't get the attribute to stretch with right hand arrow.
View 2 Replies
ADVERTISEMENT
AutoCAD Dynamic Blocks :: Stretching Multiline Attribute Text Box
Aug 24, 2011Attached is a block that I use a lot. Originally I had two separate single line text attributes for the "title". I modified it to have a single multiline text attribute instead. I want this attributes text box width to stretch along with the line below it, so that long text strings will automatically adjust to single or multiple lines as necessary and not run off the end of the line. As it stands now I have to stretch the line and then adjust the width of the text box to match.
Also it would be nice if the bulk of the text would stay on the bottom line and only the "overflow" would move up to the next line.
AutoCAD Dynamic Blocks :: Wipeouts - Not Stretching With Dynamic Actions
Jun 4, 2013I have noticed in some dynamic blocks that have wipeouts in them, that they dor not stretch with dynamic actions.
In fact, they don't seem to be capable of stretching.
I have read some post about "Autodesk Sketchbook Designer for Autocad 2012" causing some conflicts.
Is there an advantage to having it installed?Do I need to uninstall it? or not?
Does it interfere with anything else in Dynamic Blocks or the drawing file?
AutoCAD 2012 / Inventor 2012
AutoCAD Dynamic Blocks :: Stretching Same Parameter In All Blocks In Drawing From One Field?
Jul 15, 2011How do I manipulate a height parameter all of the dynamic blocks in the drawing from one single field? Say a field located in the drawing properties or on the drawing itself.
For example: Multiple blocks of different walls of same height with other blocks of things on located on those walls, dependant on the wall height, all linked to and changed by a single field. Possibly a Wall Height field located in the custom tab of the drawing properties.
I can pickout each of the blocks and change them at the same time in properites menu because they all share the same parameter name. I would just like to have that height parameter of every block in the drawing, that has that specific parameter controled by a single field. Which I could enter a new height at anytime that would change every block in the drawing to that height.
AutoCAD Visual LISP / AutoLISP :: DXF For Lock Attribute Position?
Oct 24, 2011what is the lock position dxf, when entmaking a block with attributes ?
View 1 Replies View RelatedAutoCAD Dynamic Blocks :: Stretching Dynamic Blocks
Sep 7, 2012is there a way to make dynamic blocks stretchable similar to a mleader,
the blocks i create are only stretchable by grips, and not by crossing
(i am using linear or point parameter stretches)
AutoCad 2D :: Stretching Dynamic Blocks Along An Arc?
Mar 13, 2013I have a 4' light fixture that is a rectangle. Right now I have it set up to where I can stretch it and it copies it’s self whatever length that I stretch it in increments of 4'.
Is there a way for me to modify this so that when I stretch it along an arc, that it copies its self and rotates its self along the edge of the arc?
AutoCAD Dynamic Blocks :: Stretching And Dividing
Jul 26, 2013Is there a way to make a dynamic block where I will insert the total length of this “ panel”. Say 3720mm, and that it will divide the “panel” into equal segments with a maximum segment width of 1240mm. ( so with 3720mm that would make 3x 1240mm segments)
Say it would be a “panel” of 5500mm it would be 5 segments of 1100mm, and a “panel” of lets say 3750mm would make 4 segments of 937,5mm.
I made a drawing to illustrate what I mean, A dynamic block for this will save a lot of time!
(here is the example)
AutoCAD Dynamic Blocks :: Stretching Equally In Same Direction
Jan 5, 2012I can create a block where you stretch a line and the opposite side stretches equally in an opposite direction but I can't find anything with stretching equally in the same direction.
The block in questions is a door with windows to the side. The door size will remain fixed but as I stretch the window jamb I would like the two mullions to stretch to create an equal stretch.
AutoCAD Dynamic Blocks :: Stretching Equally While Arraying
Jan 17, 2012I have been trying (albeit unsuccessfully) to draw a DB that requires a hole spacing of 16" maximum. The problem with this is that a pair of holes will need to be added or subtracted based on the width while not exceeding this 16" maximum dimension, but maintaining even spacing. I.E., when this block is stretched down, a pair of holes needs to be subtracted and the remaining holes need to be spaced evenly. I have attached the block drawn at it's maximum width and most required holes at this width with stretch parameters for each hole set. The best idea I could think of would be visibility states for each series of holes that would be activated when the block is stretched accordingly but just can't seem to make it work.
View 7 Replies View RelatedAutoCAD LT :: Stretching In Dynamic Blocks Moves Line
Nov 14, 2012Please see the attached drawing. It's for a conveyor system, and the idea is that when you insert the block, you could then select the size of the conveyor and the angle of the turn (straight sections are another block).
What is suppose to happen is, when you insert the block, you stretch the conveyor to the size desired, and the rest of the block should scale to match. Then you select the angle of "turn", and you're good to go.
I got it all to work except... when you stretch the line out, everything scales, but the line doesn't stay in place and just stretch to the left, it moves, which leaves a gap where the conveyor should be.
AutoCAD Dynamic Blocks :: Combination Stretching And Visibility States?
Dec 9, 2011I am working on a few dynamic blocks with ducts.The plan is when you stretch the duct to far it will automatically place a coupling and the next peace of duct.
This wasn’t the problem but if I connect more than 2 ducts it goes extremely slow. (see attached file)
I think that if I am using larger steps between stretching (still testing this theory) it will go faster but this goes against my nature of being possible to exactly decide the length on my one.
AutoCAD Dynamic Blocks :: Stretching Multiple Lines By A Different Amount
Oct 18, 2012I'm looking at a block which has multiple visibility states, 2 of which show a beam as a side elevation, where the beam can be stretched to give a length. This works well.
But I'd like to be able to have the beam stretching so the bottom flange of the beam can stretch relative to the top to give an angle to the beam end, and also have the lines representing the flanges (whose position will vary depending on the steel size) can also be stretched to give a neat cutoff.
Stretching the bottom of the bottom flange is easy, but I can't figure out how to stretch the inner lines? They would have to be moved a proportion of the distance which will vary between beam sizes/flange thicknesses, so putting in a fixed multiplication factor won't work. The mathematics to set a multiplication factor based on other elements of the dynamic block is easy, but is it possible to have such implemented on a varying basis?
Elevation showing what I want to do, and the block itself attached.
AutoCAD Dynamic Blocks :: Insertion Point Of Attribute Changing Within Dynamic Block
Nov 21, 2011I wish to create a dynamic block containing some attributes. These attributes are inside rectangles that can't be modified in length using linear parameters ; but the attribute has to be always in the middle of the rectangle. So, I draw a line inside the rectangle (in a hidden layer) and insert the attribute with center justification (not sure for the translation) that I place in the middle of this line ; then I put a coincidence constraint (not sure for the translation, but it's the first one) linking the middle of the line with the middle of the attribute.
But here's the problem : when stretching my rectangle, the insertion point of the attribute suddenly changes from "center" to "bottom left".
AutoCAD Dynamic Blocks :: Pass Attribute Values To Dynamic Block Parameters?
Dec 4, 2013I am looking for a way to use the ATTIN/ATTOUT workflow to bring in data from an excel spreadsheet to drive the size of each of my block's instances. The block will be simple, a rectangle, with width and length parameters. For each entity in my excel/csv file these parameter values are spelled out. I know how to display these parameters in my attributes, but I don't know how, if I were to feed in these values, to drive the geometry. If there's a better way to take a list of width and length values to generate a series of blocks each with a rectangle containing its respective size.
View 1 Replies View RelatedAutoCAD Dynamic Blocks :: Delete Last Attribute In All Of Specific Blocks
Jan 24, 2012I have the same block repeated multiple times in a drawing, and I want to delete the last attribute in all of the specific blocks. When I edit the block in block editor, the attributes do not show up. After I explode the block, there is no text. The attached image shows the properties of the block.
View 9 Replies View RelatedAutoCAD Dynamic Blocks :: Add Attribute Value To Mtext
May 25, 2011I have an attribute definition and I need to add its value to an mtext. I added it in mtext insert field it is ok, every thinks work fine it is only needs a regen but it is not a problem.
The problem is when my mtext and att in a block regen does not work in model space, I had to enter block and regen. Is there any way to do it without entrance in block editor?
I attached a simple example.
AutoCAD Dynamic Blocks :: Rename Attribute Tag
Nov 4, 2011How do you edit attribute tags (only) and retain the values of the attributes? When I try to redefine a block the attribute values change with ATTSYNC.
View 1 Replies View RelatedAutoCAD Dynamic Blocks :: Getting Parameter Value From Attribute
Nov 10, 2011I need a rectangle block which on insertion prompts me for some data (name/tag/item number) and then displays it (this I can do). This is al pretty straightforward. But I also want to be able to fill in width and height and then have the block stretch to the correct size. So basically what I think I need is to have the value of a parameter refer to the value of an attribute. I've gotten it to work the other way around, where the attribute displays the size of one side of the rectangle (after stretching and regenerating), but I'd really like to have it working the other way.
View 4 Replies View RelatedAutoCad :: Dynamic Blocks And Attribute Definitions
Mar 6, 2007I've created a dynamic block with two visibility states. The second state is a copy of the first state, but some of the attribute definitions have been moved, along with some of the geometry.
When I insert the block, then toggle between the two visibility states, the geometry changes as I would expect, but the attributes stay in the position dictated on the first state.
How can I make sure that the attributes move for the second state, as I need them to.
AutoCad :: Editing Attribute In Dynamic Blocks?
Sep 24, 2012making dynamics blocks and more over utilizing the attribute feature but I have discovered some chnages tat i need to make.
My question right now is, once an attribute is created and put into the block editor is that it? Ifi need to edit it can i edit it? I don't really see an option or command right off that would allow me to do this ?
AutoCad :: Dynamic Blocks - Stretching First Image To Generate Second Image
May 5, 2011I have a box, and inside that box, there is another box. Connecting/joining both boxes are two lines on all four sides of both boxes. What I don't know is how to stretch the outer box (dynamically) from the top right corner, to any size i wish to drag it out to (keeping the inner box in the center at all times, and keeping the lines joining the boxes, connected to both boxes).
I can:
-Dynamically stretch the outer box from the top right corner, keeping the inner box in the center
I can't:
-Keep the lines joining the two boxes connected to the two boxes.
There is a picture attached that shows the box before it is stretched, and a picture of the end result that im looking for. I just need to know how to dynamically stretch the first image to generate the second image.
AutoCAD Dynamic Blocks :: With Attribute Text - Set Constraints?
Aug 27, 2013I am trying to set constraints to this block and having some issues. I want to constrain the attribute text so when I stretch the block from the grips the text centers itself automatically within itself. The constraints will not let me pick the grip on the attribute text as a point.
View 2 Replies View RelatedAutoCAD Dynamic Blocks :: Flip Attribute Justification?
Jan 27, 2009I've built this nifty block for holdowns, but the attributes get all goofy on me when I use the flip command. The problem is that the justification of the attributes does not change when they are flipped - so if I modify the text in the attribute while the block is in the FLIPPED state, how to modify the justification?Check out the attached file to see what I'm talking about. The block instances are numbered so you can follow along:
1. block is inserted
2. attribute text is modified in NOT FLIPPED state - everything is dandy
3. block is flipped
4. attribute text is modified in FLIPPED state - text justification is jacked up
5. block is flipped again, in order to demonstrate the continued jacked-uppedness of the attribute
AutoCAD Dynamic Blocks :: Attribute In Visibility Parameter
Dec 17, 2012What I'm trying to do is have a graphic scale with a set list of scales the user can pick from. This was easy using the Visibility Parameter.
However, I want to add a "custom" vis state where, once they select this option, the attributed definition box will pop up and give them the option to input whatever scale they are using.Check out the attached .dwg to see what I've done so far (I just have the attributes on the "custom" vis state).
AutoCAD Dynamic Blocks :: Not Updating With Value Of Attribute Within Same Block
Jul 2, 2013Fairly versed with Dynamic blocks here, so the first thing I checked was to make sure that my FIELDEVAL was set to 31 to ensure updates but this one isn't working for me and may be a limitation of the software?
I'm making a dynamic block for my users who aren't familiar with electrical wiring so I am developing a series of blocks for our typical wiring configurations. In this instance, I've setup a pair of attributes to allow the changing of wire color codes and I want to use that single attribute entry to used in multiple other locations that are also connected to that conductor in certain situations. I have setup a field within this block to be the "VALUE" of the object (the attribute) in order to accomplish this. Unfortunately it is only displaying the default value I have for the attribute and will not update either upon insertion of the block or after an edit. Is this beyond the capabilities of Dynamic blocks or do I need to take a different approach?
Find file attached.
AutoCAD Dynamic Blocks :: Using Data Link As Attribute
Nov 19, 2013I need to create a small table to ID the User, Computer name, Door Key, etc for a floor plan drawing of our office. I'd like to get this done in Excel and link it all so the bldg manager can make changes to the drawing without me. I have created the excel file and created a "name set" in excel for each room. In Autocad 2013 I have inserted a table from a data link and pointed that link to the named range of the room (the named range in excel is an 8 cel block with al the info I need repeated and uniquely named for each room.
This works great...so my next step is to create a block out of the table and make the DATA LINK a variable attribute...that's where I'm stuck. i cannot figure out how to do this. I would love to be able to INSERT BLOCK and have one attribute question...ROOM NUMBER?. That should look to the excel NAMED SET the corresponds and populate the table.
AutoCAD Dynamic Blocks :: Field Value Not Updating Attribute Value
Jan 29, 2013I have created a rectangle whose length changes.The value of the paameter "Dist1" is this length field that I associate to the attribute value. Basically, echo length from Dist1 into the attrib value.
The problem is when I insert the block into the drawing the value is shown as "DIST1", even after regen.
Once I pull the grip point to a new length and regen it still shows "DIST1".
If I go into the ddedit and select the edit box (for multiline data field) the shown value will correct itself, but only one time.
If I change the length again, the dimension does not update.
It worked fine when I tested the block but is having issues days later.
AutoCAD Dynamic Blocks :: Visibility Names Are Not Reflected On Attribute
May 17, 2013I have two visibility states. STATE1 and STATE2 used at attribute .
I only see the first (STATE1) or the default.
Changing the state works fine with objects ( a simple box and circle) but not with the attribute.
AutoCAD Dynamic Blocks :: Rotate Attribute 180 Degrees About Its Center?
Jul 11, 2011Attached is a dynamic block for a civil grid tick. It's my first time creating a dynamic block so it's probably not the most efficent use of the dynamic parameters etc.
I have it setup with 4 visibility states to allow the northing and easting attributes to "rotate" about the center of the grid tick, to give options for readablity and/or text overlap.
What I wanted to add was figure out how to make the individual attributes flip 180 degrees about a point (roughly the center of the attribute). Again this would be for readability.
AutoCAD Dynamic Blocks :: Attribute Not Rotating And Stretch Parameter
Jul 21, 2011I am very new to dynamic blocks. I am starting off learning the small stuff before I get to the larger more complex blocks to convert to dynamic.
I have a reference block I am trying to "master" all the functions we would like to see.
I have two major concerns.
1) Why can't I rotate this block (via rotate action) and have the attributes stay at angle zero? I thought I built the parameters and actions correct.
2) I haven't ran across anything that explains how to stretch 2 linear parameters at the same time with the same distance (ex: stretch both at .25, .5, .75)