I need to change the shortcut commands but cannot find the file or how to do it in AutoCAD LT 2012. I had to reinstall due to a virus in my computer and I cannot remember how to do this, it has been too long.
View 2 Replies
one of the pc at my work place seemed to be working funny, compared to the other pc.
For example, the command CO won't work, but instead i have to type CC to copy. The command MA doesn't work at all, and i don't know how to match properties.
Along the way, there are other commands that I encounter before. Basically, it jus feels funny for this PC.
Is there any way to restore every single setting without re-installing the autocad?
We recently upgraded to AutoCad 2014 and the acad.pgp file does not seem to load correctly on one of 3 stations.The other 2 seem to be working just fine.
I located the file it is referencing with the (findfile "ACAD.PGP") command, to be sure I am looking at the correct one.
What happens is when I type PS in the command line it should initiate the Paperspace command. It clearly states in the .pgp file " PS, *PSPACE ". However what shows in the command line is "Pick line"! To be sure it is loaded I ran the REINIT command.
We are working in AutoCAD 2010 and the keyboard shortcut commands are not working for one of our users. we are having difficulty getting it back online for her. we tried a menu load for the acad.pgp file and it isn't working .
View 2 Replies View RelatedI am using short cut keys for commands and recently commands are not working right.
'Ctrl + 1' is copy so if i have something selected it will go directly in to the copy command and allow me to pick a point.
but now its doing this.
Command:
Command:
Command: _copy
witch makes me think its hitting enter twice that deselects what i had selected.
the macro in cui is as follows
$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP ),_copy,^C^C_copy)
is their some command set so it will stop doing that double enter? it just started doing it today. I have closed out autocad, restarted, made sure a key isn't stuck on my keyboard.
I'm able to add custom panels/buttons into the Ribbons, by cloning the existing ribbon (from acade.cuix) into my partial cuix. However.. I'm not able to add more commands to the shortcut menus, using the same technique.
Is it possible to add custom commands to existing shortcut menus using a partial cuix?
I am trying out autocad 2012 for mac. I can't find the 3d commands like I could on the windows version. I don't know if it because of the new 2012 version but I can't find the tool pallettes for the 3D tools.
View 1 Replies View RelatedToolbox shortcut commands no longer work in PS CS2. Any command that I try to execute in PS generates a "program error" message, including trying to exit the program. Now I have to go into Task Manager and "kill" it in there to get out of it. Images and changes will not save.
I have deleted the PS preferences and rebooted. I un-installed and re-installed PS. Same problem. Only happens in PS, not InDesign.
I can click directly on the toolbox to activate a certain tool, but this is so painfully slow.
Dell 8400 3 ghz box, Window XP latest version, all updates.
Tons of memory and hard drive space.
Where can I find a list of script-fu commands?
View 2 Replies View RelatedI want to find a shortcut to be able to slice off the corner of an object (see picture below). Is there some sort of build in function to do so?
Compare.jpg
I have been manually doing this by (1) creating a square surface (2) re-positioning it over the corner and (3) using the slice command to ultimately slice off the piece and delete the excess.
As you can surmise, step (2) [re-positioning that damn surface over the corner], takes FOREVER.
I've got most of my most commonly used keyboard commands changed to simplified versions that suit me, however, I have not figured out how to change the snap commands. I still type "nea" and "per" to snap to nearest and perpendicular. How do I change these?
Also, how do you change the F keys?
I would like to change the order of the point grip/roll over from
move lable
rotate lable
reset lable rotation
reset lable
to
rotate lable
move lable
reset lable rotation
reset lable
I can not find this in the CUI.
I'm having trouble with the renaming of X-refs.i have made a script file that re-paths required x-refs to a new project, but this leaves the x-ref name as the old x-ref. Any keyboard commands to change the name? or to set the name to file name?
View 9 Replies View RelatedWhen I use the shortcut in CS 6 "shift + delete" the dialog box does not show up the selection actually disappears. Where to find the content dialog box without the shortcut.
View 3 Replies View RelatedHow to programmatically find the key assignment for a tool?
View 3 Replies View RelatedI didn't like the name of my custom Pulldown that I made:
DSI-Menu.cuix
I Did a Save as:
DSI-Menu_sc.cuix
All the custom Commands list the original DSI-Menu as the source. Can I somehow change that so that the source is DSI-Menu_sc?
The feature where you can quickly change a brush size/ diameter by pressing Alt + hold right click (for Windows) (In Mac, control + alt + left click) is neat but is there any way to change that shortcut to a different combination? I can't find it in the shortcuts list.
View 1 Replies View RelatedCurrently when you press the caps lock button while you use a brush you get a circle marking the boundary, I would like it to always be like this without pressing the CAPS LOCK. how can alter this behavior?
View 5 Replies View RelatedI am using R14 autocad.
i have created a project drawing , i have saved it as dwg file. But when i open it all my commands are gone, How to get Commands i have used
how to get a list of Variables and Commands from the Help file?
View 9 Replies View RelatedI am trying to change my shortcut menus. Instead of modifying the current default mode, I am trying to make a new default mode menu and preserve the original. I have made the new menu and named the aliases POP501 & CMDEFAULT. But, when I right click the mouse, civil 3d still references the original default mode menu. How do I change this?
View 5 Replies View RelatedIn the earlier versions of acad the "ctrl-w" toggled object snap tracking on or off, but in 2012 it is changed to Selection Cycling on or off. This is quite irritating, because I got used to toggle object snap tracking with it and still automatically use it for that purpose. But I tried my best in the user interface to find it and change it or even disable it. But can't seem to find it anywhere or change it for that matter.
View 6 Replies View Relatedis there any way that I can change position of represenations with shortcut on keyboard? I use mouse to select each position now.
inventor 2013 sp2 64bit with window 7
Autodesk Inventor Professional 2014
Autodesk Product Design Suite Standard 2013
Microsoft Office 2007 & 2013
Windows 7 64bit
Synergis Adept 2013
Visual Studio Express 2010
I made my plug-in for Autocad 2012.I register my plug-in in registry and so it's autoloaded.If I open Autocad I saw my toolbar, my message from IExtensionApplication.Initialize and all my commands (marked as [assembly: CommandClass) works fine. No problem.
BUT! If I open autocad file by double click - autocad opened. Now I saw my toolbar, saw my message from Initialize!But any commands didn't work. Autocad said that command is unknown. What can be a problem? My be in Autocad version? I have student version and startup message about it.
Is there a good reference that deals with command line formats in scripts?
I'm trying to create a script from an Excel file with a sequence of line commands. However, it seems I have to add a blank line in between each one to end the input. Is there something I can add at the end to avoid having to insert blank lines?
Also have the same problem with the -layer set command.
How do I change the short cut keys in only the right click menu? For example I used to be able to right click then type M for move in 2012. Now in 2013, I have to right click then click V for move. I also used to be able to right click and type O for rotate. Now nothing happens. I have to click again on rotate rather than typing a key. There's a few others I'd like to change.
View 9 Replies View RelatedHow do you change/edit command shortcut keys? For example, I would like to change the keyboard shortcut key for the command COPY to "C" instead of "CO" and CIRCLE to "CR" instead of "C" because I use the COPY command much more than CIRCLE and I'd like to maximize my drafting efficiency. In older versions of AutoCAD, you could open the acad pgp file and edit the info using "wordpad"; however, I have not been able to find that same file for this 2011 version.
My system is:
Gateway AMD Phenom II X4 820 quad-core processor 3 GHz
Windows 7 Professional 64-bit os
ATI Radeon HD 4250 graphics
640 GB hard drive
6 GB DDR3 memory
What I am wanting to do is select objects or object mouse and use a keyboard shorcut to change those objects to a layer that is frozen. The layer is called "AS-BUIILT DELETED"
View 6 Replies View RelatedI am trying to set up auto importing by tethered shooting with a Canon 1Ds (but don't think brand and camera matter.)
I never use DNG, and am not aware of, and after a lot of searching, cannot find anywhere in the LR4.3 preferences at which I specified DNG conversion. In the Auto0Import dialog there is a File-handling tab that offers one choice: how to spell the dng suffix. The files I want to import will come in as CR2., and testing this with other folder destinations and with Canon's EOS Utility prove that the camera is "sending" CR2 files.
I can run the ACC fine on multiple DWG files with a basic set of commands in the script file. But, when I try to load an AutoLISP/Visual LISP file and run it from inside the script file, it doesn't work. How to run a LISP file using the ACC?
View 1 Replies View Relatedfile info in Photoshop shows only an empty box yet works in bridge.
View 1 Replies View Related
