AutoCAD 2013 :: Use Array Ribbon In Classic Mode
Nov 22, 2012I'm referring to the new array ribbon, and not the classic mode (ARRAYCLASSIC cmd). Is it possible to?
View 3 Replies
ADVERTISEMENT
AutoCAD 2013 :: Classic Versus Standard Array
May 30, 2013There are different results when executing polar array using the 'classic' method and the array using ACAD's standard array. I tend to revert back to the classic array as I find this more user friendly and tend to use this one over the standard ACAD array. Which methods are preferred by other CAD users ? I was wondering if any other CAD users prefer any other 'classic' functions over the standard ones. I sometimes use 'classiclayer' as well because of a display issue, not sure if this is a common bug that other users have found too ?
View 8 Replies View RelatedAutoCAD 2013 :: Convert Ribbon Menu Items Into Classic Workspace?
Nov 13, 2012i having a fully working ribbon in ACAD2013. it is a registered dll that is originally coded in vb.net.
unfortunatley the functionality is only visible at the drafting & annotation workspace but is desperatly needed in classic workspace mode.
for hours i am trying to find a way to make my functionality working in classic workspace too.
is it possible to extend the classic workspace in acad2013 with my functions? if so, how, or where can i get more detailed information to solve my task.
AutoCAD Architecture :: Finding The Ribbon And Classic
Apr 30, 2013I just installed the student version of ACA 2011, but it does not show any ribbon and I could not even set up the classic look either.
View 2 Replies View RelatedAutoCAD 2010 :: Ribbon Interface And Classic Workspaces Won't Load?
Jun 2, 2012I installed AutoCAD 2012 on a 32 bit windows 7 workstation but I received an error message."Cannot find acad.cuix customizastion file".I tried repairing the installation but it couldnt..I tried unistalling but won't uninstall..The machine was running previous versions of AutoCAD.
View 3 Replies View RelatedAutoCAD 2010 :: Convert Existing Classic Toolbar To Ribbon Type?
Apr 19, 2012change my existing customize classic toolbar to be ribbon type.. Though want to try out the ribbon type format with my current customize toolbar.
View 1 Replies View RelatedAutoCad 2D :: Use Path Array Feature On 2013 To Array Stairs
Sep 19, 2012I'm trying to use the PATH array feature on 2013 to array stairs, and I can't get the array to be 100% accurate. It seems like CAD rounds the decimal to the nearest 3/4" which could be causing the problem.
I set my run to 10.5" and rise to 7.25", array along the angle of the stringer, and there's always a small overlap on the stairs. The "distance between" should be 1'-209/256" and CAD rounds it to 1'-3/4" which is where I believe the error is. Is there any way to fix this or array this correctly? Otherwise...back to the COPY method I suppose.
AutoCAD 2010 :: Hatch Select Objects - Classic Mode
Aug 9, 2012Is it possible with the hatch command to be able to select objects first instead of picking an internal point?I looked at this thread first which covers the same problem but not sure if there ever was a solution. URL....
HPDLGMODE is currently set to 2, I tried setting it back to 1 but that brings up the hatch popup window as it does in Classic mode and 0 does the same thing as 2.
AutoCAD Civil 3D :: Where Is Associative Array Ribbon Tab
Feb 2, 2013Where is the Associative Array Ribbon Tab? I want to put into my Contextual Tab States for when I select my arrays.
C3D 2014 SP1
W7x64; i7 8gb; Radeon HD 5700
AutoCAD LT :: Array 2012 No Contextual Ribbon Menu?
Jun 1, 2012new Array command in 2012...
On a clean install without importing the users settings, the ribbon changes to to the array menu when the command is selected but if we import settings from a previous release it doesnt work.
All the other contextual menus like text editor and hatch menus work fine, seems to be just Array (I guess because its the only new one?)
Is there a way to get it working? I checked CUI and it appears under both Tabs and contextual Tab States, the settings seem the same as the others that are working?
AutoCAD 2013 :: Plug Ins In Classic Screen
Jun 16, 2012Where can i find the "plug ins" i have added to the autocad in the classic screen, (and their symbols also)?
(In the other screens there is a special "tab" named "plug- ins").
AutoCAD 2013 :: Window List In Classic Interface?
Oct 9, 2013I use classic interface in Autocad. After minor modifications in menu of 2014 version, window list disappeared from menu bar. See picture below:
How it can be inserted here?
AutoCAD 2013 :: Icon Disappear When Use Classic View
Sep 3, 2013I found that when I open the autocad using Classic view, the icon are dimmed as attache file, however, when I open it in annotation view, it is normal.
View 4 Replies View RelatedAutoCAD 2013 :: How To Switch To Classic Tray View In 2014
Nov 6, 2013Is there a way to switch to the classic tray view in AutoCAD 2014? What I am referring to as "classic" was the tray that had the more rectangular icons with words in them as opposed to graphics. The buttons would highlight if active. To ensure I am clear on what I am referring to as the "tray": the new tray has smaller, square icons, shown below.
View 6 Replies View RelatedAutoCAD 2013 :: Annotation Scale Option Is Displayed Only In Model And Viewport Mode But Not In Layout Mode
Mar 14, 2013“annotation scale” on the lay out mode,
I’m not sure about the current “annotation scale” in case of lay out mode.
Annotation scale option is displayed only in the model and viewport mode but not in the lay out mode (attached)!
Based on what annotative objects living on the lay out but neither in the model (or viewport) are re-sized? At this mode, there is no option to choose the annotation scale?
On other words, how to choose the annotation scale in the lay out mode?
AutoCAD 2013 :: 2013 - Ribbon Panels Will Not Tear Off
May 8, 2013All of a sudden my ribbon panels will not pull off... some refer to this as 'tear off'. The interface is not locked either.
View 5 Replies View RelatedRevit :: Boundary Ribbon - Edit Mode Disappears
Feb 13, 2012Below is the image of my ribbon after I begin the edit boundary command for a floor slab. For some reason the ability to finish or cancel the edit mode disappears and I'm unable to close out of the command without undoing everything I've done.
View 9 Replies View RelatedAutoCAD 2013 :: Array On Two Paths?
Aug 27, 2013Rhino allows for two-rail curves and extrusions, is there anything similar in Autocad2013? I'm working on a trellis that has an undulating, slatted top - I can array the slats along one spline/polycurve, but figuring out how to rotate them to match the secondary angle/curve (it twists) is proving to be really difficult. Rotate3D I have trouble with (crossing different faces/USC which confuses me), and doing so for each slat is going to be exceptionally time consuming.
Is there a way to array a form along two paths, so that the pieces automatically adjust to match the needed angles that both rails define?
AutoCAD 2013 :: 3D Union Array
Jul 22, 2013I have a base(blue) with an array(orange) positioned on a face.
When I select all & UNION the whole geometry becomes orange & I would like it to become blue.Selecting the base first then the array doesn't seem to work.
AutoCAD 2013 :: Copying Via Array
Sep 24, 2012I am currently trying to draw a football stadium and I have copied the seats along the rows by using the array command. When I click on one seat it selects all the seats from the array. Is it possible to just select one seat incase the other stands don't have the same amount of seats?
View 4 Replies View RelatedAutoCAD 2013 :: Array Default Settings
Apr 12, 2012If you can reset the default No of Rows and Columns that are generated.
View 1 Replies View RelatedAutoCAD 2013 :: Polar Array Of A Circle
Dec 5, 2012I am trying to do a polar array of a small circle within a large circle. I chose the center point of the large circle as the center point of the array, but for some reason the smaller circles are not in perfect array as some one them slightly overlap the larger circle. Is there some way to calibrate it correctly?
View 1 Replies View RelatedAutoCAD 2013 :: Trimming Away Array Items
Jul 23, 2013How to trim an array? I want to trim out array items as if using a crossing window, not as the trim command does. See attachments. I want to be able to trim as in array 2, not as array 1.
View 9 Replies View RelatedAutoCAD 2013 :: Control Array Within A Block
Nov 20, 2013I wish to control an array within a block (see jpg). Basically, I have a series of circles which I want to fix to Distance1. I want to control the distance between the circles with an expression called 'centers' (say 80mm). When I change the length of Distance1 in the Properties-tablet to say 600-mm, I want the array to follow the dimension.
When I select the array, the fx button next to the column distance on the array-tablet is greyed out. If I were using Revit, I would apply a dimension and give it a label which I would manipulate in the identity-table. What should I do in AutoCAD to achieve the same result?
AutoCAD 2013 :: How To Create Array Of Auditorium Seating
Dec 11, 2013I am trying to find the best way to accomplish the task of populating an auditorium section with chairs. So far, I have created the arc path of the section and then offset each row the specified distance. From there I place a copy of the chair at one end of every path and then use the PATH Array tool in AutoCAD LT 2013. While this works, it doesn't seem to be very efficient (can actually be a royal pain, if changes are required) and was wondering if there is a better way to accomplish this goal?
What I would like to do is to use the POLAR Array tool and just work from the first row. That way, I could maintain all the necessary associativity and edit the array as a whole. However, this tool doesn't appear to offer the option of changing the quantities on successive rows, which led me to the above approach.
How I could use the tools differently, or has an exchange app that will accomplish what I am looking to do.
AutoCAD 2013 :: Array Editing To Fill Shape
May 20, 2012I was trying to figure out how to edit an array to either remove all the array objects outside of a shape or to fill in a shape with objects.
For example, I created a rectangular array of dots and want to remove the dots such that it makes a circle (or triangle if that's possible?). There are reasons that I can't use the polar array to make the circle because I need certain parameters that really I can't replicate. Also, selecting each point is too tedious and really not efficient (though it could be done eventually, but I don't want to waste a ton of time).
AutoCAD 2013 :: Turn On Dialog Box On For Array Command?
Jul 3, 2013How do I turn on the dialog box "on" for the array command?
View 2 Replies View RelatedAutoCAD 2013 :: Path Array Of Block With Attributes
Sep 22, 2013Is there any way to fill inn attributes on individual blocks belonging to an associative path array?
View 7 Replies View RelatedAutoCAD 2013 :: How To Remove Edges Of Array Object
Jan 9, 2013I've created arc, then 3 side polygon and placed created array. Now I want to delete those sides. How can I do it?
View 2 Replies View RelatedRevit :: Creating Sweep - Ribbon Will Not Show Mode Options To Accept Or Discard Changes
Mar 14, 2012Ribbon has been acting strange. One example is when creating a sweep the ribbon will not show the mode options to accept or discard changes while creating the sweep path. I have to cycle the ribbon display options to show the X and check options to complete the sweep path. This is only one example of many different odd things happening.
Sometimes when I am simply drawing model lines the selection options for rectangle, circle etc do not appear until I cycle the ribbon display options. This only started in the last week or two.
Windows 7
RAC2012
AutoCAD 2013 :: Object Rotate And Spacing In Path Array
Dec 11, 2012I have a polyline path and a rhombus. I will like to array the rhombus along the polyline path. As you can see from the attached file, as the object rotates along the path, it shift off the path such that the distance between the rhombus and the path changes esp at the turn. How can I keep this distance between the rhombus object and the path constant?
View 7 Replies View Related
