I am trying to do a polar array of a small circle within a large circle. I chose the center point of the large circle as the center point of the array, but for some reason the smaller circles are not in perfect array as some one them slightly overlap the larger circle. Is there some way to calibrate it correctly?
View 1 RepliesI have drawn a bar counter in 3d which has a top rectangular shape with curved corners. The front of the bar has 100mm wide wooden fascia panels and they need to follow the line of the bar. I am using the Polar Array function which works great except I cant seem to get the panels to follow the curves/arcs around the corners, but they sit neatly on all the straight edges of the bar. So in other words the panels are straight and lined up on the straight parts of the bar but the panels stay at 90 degrees instead of following the curved areas of the bar.
View 1 Replies View RelatedI put the three holes in the outer ears/lugs with a Polar Array and want to change their diameter to make them smaller. If try to use Delete Faces to remove the holes it drastically effects one of the other lugs.
Is there a better way to edit holes in an array and is there a way to make arrays non-associative after the fact of creating them? The dwg is saved in 2007 but created with 2013
sequence for creating a Polar Array? I have no problem with Rectangular Array but for some reason I have no success with Polar. include what it should say in the command line in the sequence. I am looking to place 22 .1" circles around a 1.5" circle. I am using v2000 if it matters, however I can use v2007 if need be.
View 8 Replies View RelatedI cannot find the drop down for Polar array. I just have the 4 squares for array when I click on it I can request polar as the array type but it gives me a quirky menu with grips and does not allow me to set fill angles and number of pieces. I had issues loading this program, Map3D 2013 and was wondering if it was skipped in the installation, The circular pattern button is not on list of commands but does show in the documentation provided.
View 2 Replies View RelatedI just signed up after scouring Google for days on this problem:
View 9 Replies View Relatedi'm trying to do a polar stretch and array for rigid insulation. RIGID2.dwg is my best option. but as you can see in the jpg, the first line should have arrayed already, because the gap is over 2". i tried to follow the instruction someone used for the clothes hangers URL.... and it resulted in RIGID.dwg, with the lines rotating off the main line.
View 9 Replies View RelatedThis is an oven design in 3D. But I would do it brick by brick, if feasible. Below the picture. Some considerations: I tried to do using Autocad 2012 using the Polar Array new feature, but I can not close the oven on top.
[URL].......
I've made this block . when i rotate the vertical line I need to add lines every 15° as you see in the image, i've seen that polar array is not possible in the dynamic blocks.
View 8 Replies View RelatedI do not understand how to draw a polar array around a rectangular shape. If it were a rectagular dining table of any size how do I array the dining chairs around the table's shape. Alternatively what if I had a large square table and wanted to array 12 chairs with 3 chairs on on each side of the table ????? I get polar arrays around a circle or polygon but do not understand the rectangle concept ???
View 2 Replies View RelatedI would like to do an array polar for 4 items and union with the command "union" all of them automatically.. how can i do that in a lisp ?
View 9 Replies View RelatedI'm trying to use the PATH array feature on 2013 to array stairs, and I can't get the array to be 100% accurate. It seems like CAD rounds the decimal to the nearest 3/4" which could be causing the problem.
I set my run to 10.5" and rise to 7.25", array along the angle of the stringer, and there's always a small overlap on the stairs. The "distance between" should be 1'-209/256" and CAD rounds it to 1'-3/4" which is where I believe the error is. Is there any way to fix this or array this correctly? Otherwise...back to the COPY method I suppose.
I am looking for a way to change the toggle polar On/Off from F10 to F6. I already did it with the "delete" and the "Ortho" keys but i can't find the macro for the toggle polar on/off.
Has you can see on the picture for Delete it's ^C^C erase;
For ortho it's ^O
Maybe for Polar it's ^P but i could validate with you before i do any changes. (;
Rhino allows for two-rail curves and extrusions, is there anything similar in Autocad2013? I'm working on a trellis that has an undulating, slatted top - I can array the slats along one spline/polycurve, but figuring out how to rotate them to match the secondary angle/curve (it twists) is proving to be really difficult. Rotate3D I have trouble with (crossing different faces/USC which confuses me), and doing so for each slat is going to be exceptionally time consuming.
Is there a way to array a form along two paths, so that the pieces automatically adjust to match the needed angles that both rails define?
I have a base(blue) with an array(orange) positioned on a face.
When I select all & UNION the whole geometry becomes orange & I would like it to become blue.Selecting the base first then the array doesn't seem to work.
I am currently trying to draw a football stadium and I have copied the seats along the rows by using the array command. When I click on one seat it selects all the seats from the array. Is it possible to just select one seat incase the other stands don't have the same amount of seats?
View 4 Replies View RelatedIf you can reset the default No of Rows and Columns that are generated.
View 1 Replies View RelatedHow to trim an array? I want to trim out array items as if using a crossing window, not as the trim command does. See attachments. I want to be able to trim as in array 2, not as array 1.
View 9 Replies View RelatedI wish to control an array within a block (see jpg). Basically, I have a series of circles which I want to fix to Distance1. I want to control the distance between the circles with an expression called 'centers' (say 80mm). When I change the length of Distance1 in the Properties-tablet to say 600-mm, I want the array to follow the dimension.
When I select the array, the fx button next to the column distance on the array-tablet is greyed out. If I were using Revit, I would apply a dimension and give it a label which I would manipulate in the identity-table. What should I do in AutoCAD to achieve the same result?
I am trying to find the best way to accomplish the task of populating an auditorium section with chairs. So far, I have created the arc path of the section and then offset each row the specified distance. From there I place a copy of the chair at one end of every path and then use the PATH Array tool in AutoCAD LT 2013. While this works, it doesn't seem to be very efficient (can actually be a royal pain, if changes are required) and was wondering if there is a better way to accomplish this goal?
What I would like to do is to use the POLAR Array tool and just work from the first row. That way, I could maintain all the necessary associativity and edit the array as a whole. However, this tool doesn't appear to offer the option of changing the quantities on successive rows, which led me to the above approach.
How I could use the tools differently, or has an exchange app that will accomplish what I am looking to do.
There are different results when executing polar array using the 'classic' method and the array using ACAD's standard array. I tend to revert back to the classic array as I find this more user friendly and tend to use this one over the standard ACAD array. Which methods are preferred by other CAD users ? I was wondering if any other CAD users prefer any other 'classic' functions over the standard ones. I sometimes use 'classiclayer' as well because of a display issue, not sure if this is a common bug that other users have found too ?
View 8 Replies View RelatedI was trying to figure out how to edit an array to either remove all the array objects outside of a shape or to fill in a shape with objects.
For example, I created a rectangular array of dots and want to remove the dots such that it makes a circle (or triangle if that's possible?). There are reasons that I can't use the polar array to make the circle because I need certain parameters that really I can't replicate. Also, selecting each point is too tedious and really not efficient (though it could be done eventually, but I don't want to waste a ton of time).
How do I turn on the dialog box "on" for the array command?
View 2 Replies View RelatedIs there any way to fill inn attributes on individual blocks belonging to an associative path array?
View 7 Replies View RelatedI've created arc, then 3 side polygon and placed created array. Now I want to delete those sides. How can I do it?
View 2 Replies View RelatedI'm referring to the new array ribbon, and not the classic mode (ARRAYCLASSIC cmd). Is it possible to?
View 3 Replies View RelatedI have a polyline path and a rhombus. I will like to array the rhombus along the polyline path. As you can see from the attached file, as the object rotates along the path, it shift off the path such that the distance between the rhombus and the path changes esp at the turn. How can I keep this distance between the rhombus object and the path constant?
View 7 Replies View RelatedI'm trying to create a Dynamic Block of an 3/4" x 3/4" aluminium angle with holes:
Depending on the length the number of holes will vary.
The distance between each holes need to be somewhere between 8" and a maximum of 12".
The holes must be centered and start from 1 1/2" up to 2" from each ends.
Each distance must be not more precise then 1/16" (no rounded off dimensions)
I'd like to simply drag the handle of the linear parameters (No lookup or visibility for 2 hole, 3 holes, 4 holes etc.)
Looking for a method of selecting multiple blocks that have been arrayed within a drawing. I have tired with filter and qselect however there is no way to filter out blocks by name contained within an aray. Would be great if there was a .lsp routine or arx file that could deal with this.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
In Autocad 2013, Is it possible to erase somme items of a rectangular associative array. I have seen that we can replace an object with a different one.
View 8 Replies View RelatedI can't find the option to use angle in rectangular array in AutocAd 2013. I am using the classic view mode.
View 7 Replies View Related