AutoCAD Map 3D :: Unable To Find Drop Down For Polar Array
Jun 26, 2013
I cannot find the drop down for Polar array. I just have the 4 squares for array when I click on it I can request polar as the array type but it gives me a quirky menu with grips and does not allow me to set fill angles and number of pieces. I had issues loading this program, Map3D 2013 and was wondering if it was skipped in the installation, The circular pattern button is not on list of commands but does show in the documentation provided.
View 2 Replies
ADVERTISEMENT
Dec 5, 2012
I am trying to do a polar array of a small circle within a large circle. I chose the center point of the large circle as the center point of the array, but for some reason the smaller circles are not in perfect array as some one them slightly overlap the larger circle. Is there some way to calibrate it correctly?
View 1 Replies
View Related
Jul 2, 2013
I have drawn a bar counter in 3d which has a top rectangular shape with curved corners. The front of the bar has 100mm wide wooden fascia panels and they need to follow the line of the bar. I am using the Polar Array function which works great except I cant seem to get the panels to follow the curves/arcs around the corners, but they sit neatly on all the straight edges of the bar. So in other words the panels are straight and lined up on the straight parts of the bar but the panels stay at 90 degrees instead of following the curved areas of the bar.
View 1 Replies
View Related
Dec 13, 2012
I put the three holes in the outer ears/lugs with a Polar Array and want to change their diameter to make them smaller. If try to use Delete Faces to remove the holes it drastically effects one of the other lugs.
Is there a better way to edit holes in an array and is there a way to make arrays non-associative after the fact of creating them? The dwg is saved in 2007 but created with 2013
View 6 Replies
View Related
Apr 19, 2013
sequence for creating a Polar Array? I have no problem with Rectangular Array but for some reason I have no success with Polar. include what it should say in the command line in the sequence. I am looking to place 22 .1" circles around a 1.5" circle. I am using v2000 if it matters, however I can use v2007 if need be.
View 8 Replies
View Related
Feb 14, 2010
I just signed up after scouring Google for days on this problem:
View 9 Replies
View Related
Dec 6, 2007
i'm trying to do a polar stretch and array for rigid insulation. RIGID2.dwg is my best option. but as you can see in the jpg, the first line should have arrayed already, because the gap is over 2". i tried to follow the instruction someone used for the clothes hangers URL.... and it resulted in RIGID.dwg, with the lines rotating off the main line.
View 9 Replies
View Related
Apr 5, 2011
This is an oven design in 3D. But I would do it brick by brick, if feasible. Below the picture. Some considerations: I tried to do using Autocad 2012 using the Polar Array new feature, but I can not close the oven on top.
[URL].......
View 9 Replies
View Related
Dec 19, 2013
I've made this block . when i rotate the vertical line I need to add lines every 15° as you see in the image, i've seen that polar array is not possible in the dynamic blocks.
View 8 Replies
View Related
Apr 29, 2013
I do not understand how to draw a polar array around a rectangular shape. If it were a rectagular dining table of any size how do I array the dining chairs around the table's shape. Alternatively what if I had a large square table and wanted to array 12 chairs with 3 chairs on on each side of the table ????? I get polar arrays around a circle or polygon but do not understand the rectangle concept ???
View 2 Replies
View Related
Mar 12, 2012
I would like to do an array polar for 4 items and union with the command "union" all of them automatically.. how can i do that in a lisp ?
View 9 Replies
View Related
Feb 3, 2012
I seem to be having trouble with polar tracking on. With this activated and in front view I can only create a line in up or down (Y) direction. I cannot create a line along the z axis. This happens randomly so I must be overlooking a setting somewhere.
View 9 Replies
View Related
Jun 24, 2012
I can't find the option to use angle in rectangular array in AutocAd 2013. I am using the classic view mode.
View 7 Replies
View Related
Feb 20, 2013
I'm trying to Array a typical floor for a high rise that I've made a group, but I can't array curtain walls vertically. It's too many floors to do one by one and if I make changes to one floor I'd like them all to change.
View 1 Replies
View Related
Sep 30, 2011
How does one get the array window in 2012 to open with the array command like it does in 2007
View 2 Replies
View Related
Sep 19, 2012
I'm trying to use the PATH array feature on 2013 to array stairs, and I can't get the array to be 100% accurate. It seems like CAD rounds the decimal to the nearest 3/4" which could be causing the problem.
I set my run to 10.5" and rise to 7.25", array along the angle of the stringer, and there's always a small overlap on the stairs. The "distance between" should be 1'-209/256" and CAD rounds it to 1'-3/4" which is where I believe the error is. Is there any way to fix this or array this correctly? Otherwise...back to the COPY method I suppose.
View 4 Replies
View Related
Dec 18, 2012
can't seem to find the drop shadow effect in Illustrator CS6. I know it should be located until the Effect menu -> Stylize -> Drop Shadow, but the only option that appears under Stylize is Glowing Edges. I have also tried to access the drop shadow effect through the Appearance panel, but it doesn't show up their either
View 3 Replies
View Related
Sep 28, 2012
I am creating new tool palettes for lab equipment blocks. I was able to create a new palette and drag and drop blocks into it. When I go to create other palettes I am unable to drag and drop blocks into them. I am able to drag and drop into the tool palette I previously created and then drag and drop into the new palette.
But when I shut off Autocad and reopen the new palettes disappear. How can I create a new tool palette and it works, then create other tool palettes and I can not drag and drop to it? I am using Autocad Architecture 2013.
View 4 Replies
View Related
Dec 22, 2011
I can't snap to a midpoint in a line. For example, If I draw a line 10" long, I can't draw a line from the center of that line. It used to give me an auto snap option to go to, but now it only allows me to snap to the ends of that line.
View 6 Replies
View Related
May 28, 2013
I can get the DWG translator Add-In with :
Inventor.TranslatorAddIn dwgAddIn = (Inventor.TranslatorAddIn)InventorOpen._invApp.ApplicationAddIns.get_ItemById("{C24E3AC2-122E-11D5-8E91-0010B541CD80}");
But I can't find ID for JPG.
View 1 Replies
View Related
Feb 17, 2012
I have a dll which shows simple dialog, which in its constructor reads from a file located in the same folder as the dll, to populate some of the controls in the form, like combo boxes. The assembly works perfectly at local pc, but when I take release copy of the dll and the file at work, I cannot read from the file.
I am able to load the dll with the Netload, but when i start the command it shows - "Unable to find assembly 'Pressurized Pipes, Version=1.0.0.0, Culture=neutral, PublicKey Token=null'. And when I click OK button shows second dialog saying "Unhandled exception has occurred in a component in your application. If you continue, the application will ignore this error and attempt to continue. Invalid Argument=Value of '0' is not valid for 'SelectedIndex'. Parameter name: SelectedIndex.
Details:
See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text ************** System.ArgumentOutOfRangeException: InvalidArgument=Value of '0' is not valid for 'SelectedIndex'. Parameter name: SelectedIndex at System.Windows.Forms.ComboBox.set_SelectedIndex(Int32 value) at Plumbing_Pipes.Pressurized_Pipes_Form.populatePipeTypeComboBox() at System.Windows.Forms.Form.OnLoad(EventArgs e) at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible) at System.Windows.Forms.Control.CreateControl() at System.Windows.Forms.Control.WmShowWindow(Message& m) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
It seems to me that I am not able to Deserialize the file and read from the list in the file, which list I use to populate the combobox.
I am using just the name of the file to deserialize it, assuming that the dll will look in the folder where the dll is located.
View 6 Replies
View Related
Aug 13, 2012
I opened my Autocad today to discover that none of the drawings I open are displaying any type of text. This includes dimension text, multi/single line text, and titleblocks. My coworkers can open with text, so I am confident that it is a setting of some sort in my program. I have looked thropugh every menu and option and I have been unable to find the setting that would need to be changed.
View 4 Replies
View Related
Aug 17, 2012
I installed ACADLT 2012. I am unable to find PFD design and symbols. I am not sure if LT comes with it or if needs to be downloaded separately as a separate package
View 3 Replies
View Related
Jun 1, 2013
while looking through certain tutorials on the new crop system i came across many that referenced the above mentioned size and resolution option in the access ratio drop down menu. They all mention a dialog box which then appears which looks really useful, however my version doesn't have this option.
View 10 Replies
View Related
Apr 13, 2012
I am unable to drag and drop the files (even .psd) into CS6 beta from my folder.. My OS is windows 7 U 64 bit.
View 20 Replies
View Related
Nov 5, 2012
I inserted a block into a very busy drawing. I can't find it now. Is there a way to locate it? I want to delete and insert a newer version, but I can't until I delete this one.
View 4 Replies
View Related
Feb 9, 2007
I can't find my Command Line Window. It somehow became undocked and is no where to be found on my screen. It does not appear to be floating anywhere. I've gone through all my display settings; however it says that it should be there and show 3 lines of commands.
View 9 Replies
View Related
Nov 14, 2011
I am unable to drag-n-drop from Grid View.Maybe I am not understanding correctly but I thought it should always be possible to grab an image in the Grid View and drop on a folder or collection on the left.
View 3 Replies
View Related
Apr 20, 2013
I have a client that is trying to use the Cable and Harness feature, but receives the following error:
"The Cable & Harness template was not found. The specified location for the project is:
[C:Workspace|Design DataCable & Harness|en-US]
Please verify that the template file exists.
He has Inventor installed on his D drive, along with most of his other programs. OS, etc are on the C drive. I have verified that he has harness.iam and a Cable&HarnessDefaultLibrary.iwl in the following location for Inventor 2013
C:UsersPublicPublic DocumentsAutodeskInventor 2013Design DataCable & Harnessen-US. As a stab in the dark, I had him copy those files over to his workspace, and re-start Inventor, but same result. Latest updates are installed.
View 2 Replies
View Related
Aug 16, 2011
I've recently installed auto cad 2007lt on our new computer. I set up numerous tool palettes with blocks that we use often. I was pulling images from the palettes to my drawing with no problem.
Today when I tried inserting an image from the tool palette it is saying that the image can not be found. I've tried under previous drawings and new templates and have been unsuccessful.
View 2 Replies
View Related
Jan 24, 2012
I have 26000 mtext that has overridden font inside the property. set to bold and print out look like crap.
see attached i want all the text to look like the text on the left. right is what they look like now. i just copied a few as an example.
can't find the font property in the mtext object:
PrivateSub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) HandlesButton1.Click
Dim doc AsDocument = Application.DocumentManager.MdiActiveDocument
Dim db AsDatabase = doc.Database
[code]......
View 2 Replies
View Related
