AutoCAD Inventor :: 2012 - How To Move Content Center File
Aug 28, 2012
inventor 2012 sp1- single user- lap top screen dies, so I loaded up all my file to external hard drive down load inventor to desktop for 30 day trial until my laptop gets fixed. laptop back up everything good moved files over except in one the assemlblies i had added some screws from the inventor catalog (place from content center menu. now I open the assembly drawing it is has unresolved files all the ones from that I loaded from the standard content center. I assueme it is looking for the files stored on the 30 day trial on the desktop but I can seem to find them to try and move them over.
View 3 Replies
ADVERTISEMENT
Sep 28, 2012
My Content Center Add-In is not loading in Inventor Pro 2012. It's listed as unloaded in the Add-In manager (see below), and, of course, "Place from Content Center" isn't shown as an option on any of the menus. If I double-click on Centent Center in the Add-In Manager, the word "Unloaded" changes to "Loaded" and I don't get any errors. It looks like it should have loaded fine. But then if I close the Add-In Manager and open it again, it has gone back to "Unloaded". I haven't found anything that can restore the Content Center functionality.
I have installed Inventor Pro 2013, and this could have been around when the Inventor 2012 Content Center broke. I'm not positive about the timing... If I start Inv 2013, the Content Center works fine in it.
What to do before uninstalling 2013 and/or reinstalling 2012?
View 2 Replies
View Related
Jan 22, 2013
I recently updated computer and installed inventor 2012 and the updates. Loaded ok
Opened project and tried to place parts from content center, nothing happened. I mean nothing. Could not even open configure Content center library in projects. I am running windows 7, 32 bit. window
I loaded it to my laptop and it works fine.
View 1 Replies
View Related
May 26, 2011
Certain pieces from the content center, both things that I made and standard content, are coming into my drawings scaled wrong. Actually I don't think it's scale, because some rectangles are coming in as squares.
Everything looks great on the assembly, but they are wrong on the drawing. I've tried replacing from content center with no change.
.iam and resulting .idw. And one showing a wrong part and a correct part on an idw. The square on the left is supposed to be 2.25" square, which is what it measures to - but you can see that it isn't snapping to the actual geometry.
This is all stuff that has worked fine on previous versions of Inventor. I've had several instances of this so far since finally getting 2012 installed yesterday.
View 1 Replies
View Related
Dec 7, 2012
we have Inventor prof 2012 lisc copy ,now we recd 2013 upgrade copy , as per discusswith local service provider of Autodesk need to uninstall whole 2012 and reload fresh 2013. i copied contenet center folder on other location and reload fresh Inventor 2013.when i installed it it is obserbed that content center libraries don't have standards which contents in Inventor 2012. To open our old projects we need this standards, the procedure to import this content center libraries from 2012 to 2013.
View 1 Replies
View Related
Mar 14, 2012
I have just installed Inventor 2012 and am experiencing a bizarre problem with placing content center parts. When I start a new assembly, and place a content center part, I would expect it to locate itself central to the assembly origin. What actually happens is that it grounds itself wherever I click on the screen. This doesn't happen with parts that I have created myself.
Is there a bug in the system or maybe an option that I have unknowingly switched off?
Inventor Professional 2012 SP1
Windows XP Pro 64 Edition SP2
View 3 Replies
View Related
Feb 15, 2012
By default Content Center creates the sub-directories 2012, 2011, 2010 etc. to store the generated content center instance files. I have never changed this behavior. Why is it required to maintain these files in the existing separate directories? I don't intend to use a previous release of Inventor once upgraded.
I can see that there is a good possibility of generating the same content center instance in multiple directories ie: if you created a 1/2" nut in the 2011 directory and then there is a good chance of doing it again in the 2012 directory.
I would like to migrate all the files in those directories to my current release 2012 then place them in a common "generic" directory without separation into yearly subdirectories. Would this cause any serious issues?
I know I'll probably be resolving links for a while, but I can deal with that as long as Content Center still works after that. I would of course change the default location to my "generic" location.
View 5 Replies
View Related
Nov 23, 2010
I was looking to insert a steel shape into an assembly, and can't seem to find the Content Center Files? I am using IV2011, any tips on where to located these files?....VAR used all default install locations
View 5 Replies
View Related
Dec 22, 2011
When our tech was here to install Vault for us I had several pressing tasks going on and did not learn how to find and alter our content center files. I now have a little time over the Christmas break to work on this. Where do I look in the settings to see where the content center is located? I plan to copy the files to my machine as I will not have access to the server over the break and I will need to know where to reset the file search at. Is this done through the project folders? If so how do I accsee read/write? I do have admin rights and we are using 2012.
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
View 9 Replies
View Related
Jul 8, 2013
A couple of years ago, there was a limit to the part file size that could be published to the content center. Using the new shrinkwrap capabilities and/or derived parts in Inventor we can produce rather large part files. Does the 2014 software have limits to the actual file size that can be published to the content center. 520K, 1M, 30M, 1G? We have some subassemblies that we would like to convert and publish to the content center but wanted to know how large we can make them.
Content Center is located on server with 3T+ of storage possible.
View 2 Replies
View Related
Jun 21, 2013
[URL]
I have begun the creation of a new custom content center library because the old one was or became corrupted during our migration from from Inventor 2011 to 2013. The old custom library was un-recoverable. The creation of a custom content center library, adding components to the the custom library and working with the file tables adding columns for part description etc.. is rather easy. Refreshing legacy content center files has been rather difficult. In some cases I needed to delete the legacy files and them re-insert them manually. This process is rather time consuming. What I would like to do is to create all the files in the family table after I have made the changes to the family talble.
View 3 Replies
View Related
May 29, 2012
Every time when I upgrate Inventor to new version, my old assembly drawing will loss the content center file. So I have to replace the old version's content center file from the new version's content center file. How to automatically migrate it?
View 5 Replies
View Related
Jan 20, 2012
I'm having some problems giving certain parts in my assembly a unique file name. Im reorganizing all of my projects in a
- content center
- designs
- libraries
way, where my projects are under designs and commonly used parts under libraries.
Now i have something like a pump. I can derrive this assembly into a solid and put it in the content center, or keep the assembly and put it in the libaries folder. since this is a part i use in multiple projects.
Now my problem is that this pump has a different name in every project, and a library part doesn't allow me to change this name. Say standard name is "centrifugal pump" while the name in project 1 would be P101, while in project 2 it has to be named P501 and so on in order to match with the flowcharts.
Is my only option here creating a solid out of these components and putting it all in my content center ( leaving my libraries folder totally empty ), adding it as a custom part afterwards ( so i can rename it ). I rather have it in my library folder, since this will keep my design folder organized without hundreds of duplicates of this pump, using different names. Besides i rather have it as an assembly so i can assign the connecting tubes of the pump to different sub assemblies of piping.
Different example, a butterfly valve excists out of 3 parts. the valve itself, and 2 connecting tubes. possible to dissemble. all 3 parts need to have the same file naming say XV900. 1 side of the valve needs to be assigned to pipe-01 while the other side of the valve needs to be assigned to pipe-02. Content center doesn't allow me to split files, but allows me to use unique file names. A library party allows me to split files ( if not read only ) but doesn't allow me to change names.
View 4 Replies
View Related
Sep 11, 2012
why content center creates duplicates of existing folders?. Some of the folders have 6 or 8 versions and there is also a duplicate EN-US folder within the EN-US folder with nested folders. So bottom line i have multiple locations and nested files within the content center. Needless to say there is a lot of time spent pointing inventor to the parts necessary to open an assembly.
We are working on a network and are all pointing to the same content center location. We are all using the same project files. Sometimes it works as you would expect, other times not.
Windows 7 64 bit
Inventor 2012 Professional
Dell T1600 CPU E31245 @ 3.30GHz
8 GB RAM
View 3 Replies
View Related
Sep 24, 2012
I have created a new item in content center in my personnel library. When i am creating a new item in content center its creating *.ipt file somewhere ? If so from which location i can open the part file ?
View 3 Replies
View Related
Jan 25, 2012
When I insert a threaded part from the Content Center I get this message "unable to successfully update the member part file, problem occurred when setting thread data" The fastener will insert but the threads are very small.
View 7 Replies
View Related
Nov 20, 2011
Somehow the Content Center Filter clears all content while in ISO or DIN. Both libraries are turned on in project.
I can see only one custom library when either filter engaged. I also see both ISO and DIN parts when filter is off.
[URL] ........
View 4 Replies
View Related
Jun 1, 2012
I used to use the BSI content fine in my old version of Inventor, but on this years version there appears to be no BSI content. I have tried reinstalling the content center and all of the options are selected but still no BSI?
View 2 Replies
View Related
Nov 18, 2011
I can log into data managment services outside of inventor.
I can't log into content center or access frame generator from inventor.
INV 2009
View 1 Replies
View Related
Jun 22, 2012
I'm using a student version of inventor 2013, and i'm trying using the content center for add bolts at my project, but all the components are unable for my use, because everything are marked as read only.
How can i do for use these components? and other question, how can i create account at vault?
View 6 Replies
View Related
Oct 13, 2012
We have an extensive library of parts that we consistently utilize, but we do use Content Center for hardware and routed systems components.
All of our library parts have our company ERP's item number in the stock number iProperty, and the ERP's description in the Comments iProperty.
For CC items, we have added columns for these and mapped them to the appropriate iProperty.
Everything works great except for one thing.
Many of our ERP descriptions inlude inch marks, foot marks, and the & symbol. For our normal library parts thhis is not an issue. However, CC items utilize these characters differently. The result is our descriptions come out different that what is entered.
See the example below...
How to include these characters in the CC descriptions?
Inventor 2012 SP3 ~ Vault Pro 2013
==================
Lenovo D20 Workstation Intel Xenon E5640@2.67GHz (2)
Win 7, 24gb RAM, NVIDIA Quadro FX 3800
View 8 Replies
View Related
Jun 22, 2012
At my company we currently have a huge number of Autocad deployments for 2010,2011,2012. Right now our deployments weren't setup to include the content centers. I have installed 2012 Inventor on my personal computer as a trial version to grab the .idcl files. I was wondering if I would be able to just drag and drop these onto a server and have my co-workers point to the file location within inventor itself via options>content center>etc.
View 6 Replies
View Related
Nov 29, 2011
Two computers with Inventor Pro 2011 on them, same set up in Apllication Options/Content Center and Apllication Options/File. On one Inventor sees Content Center on the other does not. What could be the problem?
View 2 Replies
View Related
Jun 24, 2013
Installed 2014 recently, and now my Content Center has nothing in it. The "Place from Content Center" window loads, and there are no folders. My item count is 0. I've attached a screen shot for reference. Clicking the refresh button does nothing.
We have no custum hardware/materials/etc.
If I try to update the content center library (step 2), the Configure Libraries is full of "Not Available"s. Again, I've attached a screen shot. I'm nervous to continue migrating with out all that info.
There are two pc's with IV, and the content center is working fine on the other pc. The CC is a local thing, and only my computer seems to be upset.
View 4 Replies
View Related
Mar 24, 2012
I want to make a customized channel with all the dimesnions fixed - except A and G (variables). See attached screen shot.
View 1 Replies
View Related
Jul 24, 2013
I just created an empty Fastenal Library, and it is set to Read/Write. We order most of our fasteners from them, but not much else, so I used "Copy Category Structure To" Fastenal. I created a plain washer to add to the library, but when I try to publish it, I can't get it to work.
When I "Publish Part," I select Fastenal and English, then am asked to select a category to publish to. The Washers folder is greyed out, along with most other folders, but the Ball sub folder is not. I can't select Plain, which is what I need, but I can select Ball.
Also, is there a way to delete sub folders? I right click on Pins or Rivets, and the option to Delete Category is greyed out.
View 1 Replies
View Related
Feb 9, 2012
I have been working on creating custom content center families that will populate our company's part numbers and descriptions into the browser and drawing BOM. I have been quite successful in this except with the material. I've created custom materials for the fasteners that have the specified strengths and finishes per the fastener. By doing this I've created a different problem.
How can I create a custom property that will insert a specified value for material into the BOM? I've tried to change the link for Project.Material and then the part inserts as Inventor's default. I don't think creating individual material styles for each fastener is a viable one since I'll end up with duplicate style names.
IV 2012
Running on:
Windows 7 64 bit
12 GB Ram
Intel Xeon processer
View 3 Replies
View Related
Aug 6, 2013
Where I can get a pdf of the standard Content Center Library? Just a list of all the parts and sizes along with nomenclature.
Dell XPS 8300
Intel(R) Core(TM) i7-2600 CPU@3.40GHz
16GB RAM
Win 8.1 Pro
Autodesk Product Design Suite 2014
View 4 Replies
View Related
Oct 5, 2012
I am using content center for fasteners I want for my assembly.However, when I close the assembly drawing and try to reopen it, the link has been lost between the assembly and the fasteners and I am unable to find them.
I have created a project file before I start the assignment thinking this will solve the linkage problem but no luck.
View 3 Replies
View Related
Mar 11, 2011
I'm trying to create a custom Content Center bolt that can be one of three different materials (6.8, 8.8, 10.9). The materials are stored in our Styles Library, and the project specifies "Use Styles Library = Yes"; so the three materials are visible from the Content Center Editor. The Material column in the Content Center Editor is defined to "Map To Inventor Property: Project.Material". Everything looks fine. But no matter what material I select, I get 6.8.
I've already got LOTS of parts published with custom materials and they all work fine, but the big difference is that these families are all the SAME material. I'm having problems with getting a family to use DIFFERENT materials. We're using Inventor 2009.
View 6 Replies
View Related
Mar 26, 2013
I'm looking for a 2" x 1" x 3/16" bar channel in the Content Center but I cannot find anything smaller than 3" x 1.41" x 0.17". I've been looking under Structural Shapes > Channels. Am I missing content from the Content Center? Or does this just not exist in the Content Center?
View 6 Replies
View Related
