AutoCAD :: Move Up To Architecture 2012
Oct 26, 2011I just installed Architecture 2012 & want to add my Lisp & CUI files.I don't see support folder
Where & how do i install my Lisp & CUI files from Architecture 2010 to Architecture 2012
ADVERTISEMENT
AutoCAD Inventor :: 2012 Browser Panels Move Around?
Sep 22, 2011We finally got the time to install 2012. We have been using it a couple weeks now and I am stumped. I have custom iLogic forms I made so I like to keep the iLogic browser panel open and docked above my browser panel so I can get them quickly. Every morning when I come in the iLogic panel is either not docked where I had it or is turned off. Sometimes I can have a model or drawing open and everything is ok.
But When I open another part and close it and go back to what I was working on it will have moved to the other side of my screen, become side by side with the browser panel or just plain turned itself off. This is one of those small things that is slowly whittling away at my sanity. Any way to "Lock" all panels location and visibility so that no one by any means can move or edit them? Why even closing a drawing will cause them to move?
AutoCAD Architecture :: 2012 - Converting 3D To 2D
Oct 20, 2011I have a number of drawings of our facilities that have been added to and revised over the years prior to having an established standard. Most of the drawings are in 2d (lines, hatches, etc.) but portions of the the newer projects were done partially in ADT/ACA (walls, doors, windows, etc.). I need to strip out the 3D information and convert to 2D for an application we will be using. Is there an easy way to do this?
I have done the Save As, Export to, and AECOBJECTEXPLODE routes but all leave 3d faces that can't be exploded any furher. I don't wan't want to use hidden line projection as that creates a very large drawing as all hatches are converted to individual lines.
AutoCAD Inventor :: 2012 - How To Move Part Of Sketch Along Z Axis
Jul 12, 2013In my sketch I want to move a smaller circle that is within a circle along the Z-axis. I've put the image below to avoid confusion. I am using Inventor 2012.
View 3 Replies View RelatedAutoCAD Inventor :: 2012 - How To Move Content Center File
Aug 28, 2012inventor 2012 sp1- single user- lap top screen dies, so I loaded up all my file to external hard drive down load inventor to desktop for 30 day trial until my laptop gets fixed. laptop back up everything good moved files over except in one the assemlblies i had added some screws from the inventor catalog (place from content center menu. now I open the assembly drawing it is has unresolved files all the ones from that I loaded from the standard content center. I assueme it is looking for the files stored on the 30 day trial on the desktop but I can seem to find them to try and move them over.
View 3 Replies View RelatedAutoCAD LT :: 2012 - Move And Stretch Base Point Selection
Feb 10, 2012I select my objects to move, then I select my Base Point to move my objects away from, then when I select my destination point the command changes the Base Point to the selected destination point and asks me again to select a destination point.
I have realized this problem occurs not only with the move command, but also the stretch command. Also, it does not matter if I am using command modifiers or not, the problem occurs regardless. Also, it does not matter how I hit enter using the command (keyboard enter button, space bar, or right mouse button) the problem occurs regardless, and occurs entirely AT RANDOM.
Following previous what I have attempted to resolve the problem:
- remove the AutoCAD LT 2012 from the computer entirely and re-install
- installed the latest LT 2012 Service Pack
- changed the mouse to a new, wired mouse (I was already using a wired mouse in the first place)
- change the keyboard (which I think is irrelevant since changing the mouse did not work either)
AutoCAD Architecture :: Cannot Continue Error For 2012
Jun 20, 2012One of the users in my office is getting the "AutoCAD cannot continue" error in AutoCAD Architecture 2012. I've read a few of the discussions concerning this issue in earlier versions.
View 2 Replies View RelatedAutoCAD Architecture :: How To Make A Second Floor In 2012
Mar 4, 2013how to make a second floor in 2012
View 1 Replies View RelatedAutoCAD Architecture :: Plotting To PDF In 2011 And 2012?
May 23, 2011After I plot to pdf, I get an error message: You do not have a PDF viewing application installed. Go to the internet and dowload a pdf viewer. The problem is that Acrobat Reader X is installed on my computer. I saw the thread about Reader X having spooling issues, so I reinstalled Acrobat Reader 9. Still get the same message.I can go to the file afterwards and open it, despite this message, but it is supposed to open from Architecture after it is plotted and it won't do that.
View 4 Replies View RelatedAutoCAD Architecture :: 2012 Won't Hatch AEC Polygon
May 10, 2011My ACA 2012 won't let me hatch an AEC polygon, or a space for that matter.
Is that a new feature, or a bug? Or am I missing something.
AutoCAD Architecture :: How To Add A Storey / Floor In 2012
Feb 16, 2012how to add a storey / floor in autocad architecture the right way.
View 2 Replies View RelatedAutoCAD Architecture :: Move Panel From One Tab To Another?
Feb 11, 2013customize my ribbon panel no longer works here thus my problem. We upgraded to 2013 and since I'm use to my 2011 ribbon the way it is ... I'm trying to customize it. How do you move a panel from one tab to another? I'm trying to move the dimenions panel from annoate to the home tab.
View 9 Replies View RelatedAutoCAD Architecture :: Autosave Ghost Folder In 2012 For Mac?
Aug 5, 2012I don't consider myself a minimalist in any way, but I like to keep my personal folders clean of any system files. I recently changed the path for the autosave-folder as it intruded my private work files. The problem is that even though I did change the path, every time I start AutoCAD a new 'Autodesk'-folder is created in my personal folder. It still contains the sub-level 'Autosave'.
View 1 Replies View RelatedAutoCAD Architecture :: 2012 - Crosshairs Disappearing In Paperspace
Jan 20, 2012We have just installed ACA 2012 on one of our workstations and randomly the crosshairs will disapear in paperspace. We will still get the cursor icon if we hover over properties and paletts etc. We have the latest service pack and ribbon hotfix. Searching hasn't come up with much.
View 4 Replies View RelatedAutoCAD Architecture :: 2012 - Revision Cloud And Tag Tool
Apr 18, 2013I work on AutoCad 2012. I am trying to find the revision cloud & tag tool. I seem to only be able to place a revision cloud without a tag on the drawing. I don't see a tag option and searching for the option on the help menu has resulted in zero hits. Does AutoCad 2012 not offer this feature or am I looking in the wrong location?
View 1 Replies View RelatedAutoCAD Architecture :: 2012 - Adding Hatch Patterns
Jul 14, 2011I am using AutoCAD Architecture 2012 and I would like to add a hatch file but all the hatch files are located in the following file C:Program filesAutodeskAutoCAD Architecture 2012ContentPackscp_ADT_UKsupport. Adding a hatch file?
View 2 Replies View RelatedAutoCAD Architecture :: Can't Get 2012 To Install On Windows 7 32bit
Jan 8, 2013I am getting a message:
"the system cannot open the device or file specified".
C: emp\_AIA9B6.tmpx86en-uscomponentsadr2012setupdesignreview2012.msi
i then search *.msi file and got another message:
microsoft visual C++ 2010 redistributed is required to continue w/ installation.....
I have admin privs, running net 4, sufficient memory
AutoCAD Architecture :: Properties Palette Docking In 2012?
Apr 20, 2012I like to have all my palettes docked, however, the Properties Palette won't stay docked after closing and reopening AutoCAD. Every time I open AutoCAD, the Properties Palette reverts to its undocked status (all other docked palettes stay put). Is there any way to remedy this? It's a pain to have to redock it every time I open the program.
View 3 Replies View RelatedAutoCAD Architecture :: Does 2012 Have Single Drawing Mode
Oct 26, 2011Does AutoCAD Architecture 2012 have a single drawing mode?
View 2 Replies View RelatedAutoCAD Architecture :: Set Multileader Grips On Landing In 2012
Nov 21, 2011In 2010, when you did a multileader, on the landing you had an arrow grip on both ends and then the box grip in the middle.. Now in 2012 they have the landing set to where there is an arrow grip at one end closest to the text and the box grip at the other end....
Is there any way to set the multileader grips on the landing in 2012 the way they were set up in 2010?
AutoCAD Architecture :: 2012 Stopped Recognizing Commands
Apr 3, 2013I am using autocad Architecture 2012. the other day it randomly stopped recognizing most commands. I cannot TRIM, CO, OFFSET, ect. all of the main ones. a couple things still work, If I need to draw a circle I can type D and still input diameter. But for all of the rest of those it says "Unknown Command, press f1 for help."
View 3 Replies View RelatedAutoCAD Architecture :: 2012 - The Configured Heidi Driver Cannot Be Loaded
Apr 25, 2011ve seen many posts about this type of error, however, I do not see how to correct this in 2012. I am operating 2012 architecture in Windows 7 through VMware on an IMac. I have run 2010 and 2011 on this machine without this issue but now 2012 has this issue. I check Performance Tuner Log and the 3d device is VMware SVGA 3D.
View 2 Replies View RelatedAutoCAD Architecture :: Changing Text Styles Between 2011 And 2012?
Jul 30, 2013I would like to preface this post by stating, for the purposes of this message, that I have absolutely no understanding of the workings of AutoCAD. I have looked at many forum discussions concerning my issue and I am simply unable to understand the terminology and/or concepts being described.
I recently purchased a new computer for my office. Accordingly, I needed to install AutoCAD on this new machine. All of the machines in my office are running AutoCAD 2011. However, after addressing some licensing issues with AutoDesk, I received a license and installer for AutoCAD 2012. Everything was installed correctly (as far as I understand) and the program itself is working fine. The problem I am running into involves the text style for the files I open:
For files saved on AutoCAD 2011, the text style used is Arial. Simple; no custom fonts. However, when I open that same file in AutoCAD 2012, the text style for the entire file has changed to Franklin Gothic Book. (Note that all files are accessible from all computers in the office through a network drive)
That is my only understanding of the situation. As I mentioned earlier I have very little understanding of the workings of AutoCAD. I have had this problem for almost a week now and I am no closer to understand this issue, much less solving it.
AutoCAD Architecture :: Plotting Files With PDF Xref Directly From 2012?
Aug 28, 2012problem when plotting files that have PDF images attached to them and are viewed through a viewport. When plotting, the publishing bar fills up but then stays filled and doesnt disappear. At this point AutoCAD is locked up and I see the file starts spooling. I have several PDF files attached that amount to no more than 500 kb, however, when spooling it racks up to 30mb before in sends it off to the plotter and it takes a very lenghtly wait (up to 60 min). Eventually it plots and sometimes it doesn't plot at all. After a while if I try cancelling the plot, it will start plotting but only half of the page and after that the entire operating system will lockup. We have several machines (6) and 2 plotters in a network and the plotters are shared. Is there a better and faster way to work with PDF xrefs? Could this be a networking problem instead of AutoCAD?
machine specs:
Dell Precision T3400
Intell Core Duo @ 2.33GHz
2GB RAM
OS: XP pro ver.2002 (w/ SP3)
AutoCAD Architecture 2012
Plotters:
HP Design Jet 1055CM
KIP 3000
AutoCAD Architecture :: Structural Member Wizard Not Working In 2012?
Jun 2, 2011I ran into a problem with the structural member wizard today. I was making up a bunch of glulams and everything was doing just fine, then all of a sudden the wizard stopped accepting new values for the member depth. No matter what you try to enter, it is rejected and a value of 1'-0" is placed in the field. It will accept new values for both width and lamination depth however. I tried to make a member of another material (steel) just in case it was just the glulams. No luck, they behave the same way, you can't set the beam depth. I also tried restarting ACA, working in a completely new (and clean) file, as well as restarting my computer, it didn't work.
I really don't want to have to go through the repair/reinstall circus if I don't have to.
AutoCAD Architecture :: Video Card Driver Version For 2012?
Apr 23, 2011I have an Nvidia Quadro FX1500 graphics card on XP64. Getting the correct video driver for ACA is critical as we all know. I did a search of the Adesk web site and one page told me to use version 259.57, while another page told me to use version 265.70.
The page telling me to use the newer driver was under the certified hardware page, where ACA is not a choice in the product used, only acad.The page telling me to use the older version was under the ACA support page.Then I go to the Nvidia web site and they tell me to use the 191.00 version.I'vehad a look nside the hardware XML installed with 2012 and te supported driver version is 6.14.0012.6570.
AutoCAD Architecture :: Tool Palettes Closes On 2012 Exit?
Apr 8, 2011have the problem of the Tool Palette not staying docked when you shut down ACA 2012? I have to reload it every time.
View 8 Replies View RelatedAutoCAD Architecture :: Desktop 2012 Section Error Message?
Apr 26, 2013When trying to cut a section in ADT 2012 I get the following message:
Command: _AecVerticalSection
Command not allowed because drawing contains objects from a newer version of this application.
How can i get ADT 2012 to cut the section i need?
AutoCAD Architecture :: Upgrade 2011 To 2012 - Wall Cleanup
May 1, 2013We just upgraded from ACA 2011 to ACA2012 and we are getting some wall cleanup issues with foundations. some walls, the footings show while adjacent wall (same style) footing disappears.
also, when i copy a wall where the footing is missing, the new copied wall shows the footing. when i move a wall without a footing, the footing shows up.
AutoCAD Architecture :: 0-width Walls From 2008 Hidden In 2012?
Sep 24, 2012I have drawings that were made in AutoCAD Architecture 2008 that when opened in AutoCAD Architecture 2012, the 0-width walls in the drawing don't show up anymore. The only solution I found was to change the Base Height in the properties of the wall (which I accessed by choosing the zdiagnostics display setting) to 10' instead of the standard 1/2" that we normally use.
I'm guessing it has to do with the wall styles as they were transferred from out 2008 to our 2012 template.
AutoCAD Architecture :: 2012 Tool Palettes - Unable To Execute
Nov 14, 2011I am running Windows 7 32 bit. I have Autodesk Architecture 2012 installed. When I try to run a simple wall tool from my tool pallette, I get the following error;
Unable to Execute the tool. Possible causes are:
- The tool is not registered properly. Please check your installation.
- The tool is from another application and is incompatible with the current application.
I recently had my entire computer wiped clean, upgraded from Windows XP to Windows 7, and reinstalled Arch 2012, so no other versions have been on this system. All of my basic drafting functions work fine.
I found an old thread about using Regedit to change the registry of the tool palettes, but that simply made my tool palette empty. I just installed this, so I don't understand why I would need to reinstall.