AutoCAD 2010 :: How To Turn On Classic View In 2012
Jun 13, 2011
I recently upgraded from 2007 to 2012 and the entire look and feel of the program is different. Like Microsoft, AutoCad has "upgraded" everything so overnight i have managed to go from marginally competent to totally inept!
I really really would like to know if it is possible to switch back to the classic view with the old tool bars and commands.
AutoCad 2012 and 13- PROJECT NAVIGATOR or project browser disappears in Classic view.
We are running 2012 and like the look of the older versions. We are using the Autocad Classic workspace, BUT the Project Browser and all that jazz is missing. Where or how do i get it back?
Just upgraded from 2010 to 2012. How do I turn off this new "accudraw" that pops up when drawing a line? And can I disable it permanently? (accudraw is the only thing I can equate it to).
My view is freezing in Architecture 2012 and when I close out of my drawing and open it again, the problem is fixed. What am I doing to make it freeze? It seems like it does it the most if I am in isometric. Also, I am working in a project manager and there are no Xref's attached.
When I plot to paper from TV2012, I'm good with monochrome - black lines, white background - awesome.
I would *like*, however, to plot a few things to PDF, but retain the view I have on my display - I.E., lines/labels of various colors and a BLACK background. I've been poking around for a bit, and if there's a way to make that setting, I'm no finding it. Everything I try has gotten me colored lines/labels on a white background.
I found that when I open the autocad using Classic view, the icon are dimmed as attache file, however, when I open it in annotation view, it is normal.
AutoCad 2012 and 13- PROJECT NAVIGATOR or project browser disappears in Classic view.
We are running 2012 and like the look of the older versions. We are using the Autocad Classic workspace, BUT the Project Browser and all that jazz is missing. Where or how do i get it back?
Is there a way to switch to the classic tray view in AutoCAD 2014? What I am referring to as "classic" was the tray that had the more rectangular icons with words in them as opposed to graphics. The buttons would highlight if active. To ensure I am clear on what I am referring to as the "tray": the new tray has smaller, square icons, shown below.
recently i have installed autocad 2011 in my pc. but some toolbars are missing like layer,draw line,multiline,polyline rectangle ( which are the usual feature of classic autocad 2004 or 2007). how i will find the classic toolbars in autocad 2011.
I am using autocad arch 64 bit on win 7 and am having problems switching out of xref classic so that the newer xref dialog comes up. i edited the SDI but then i cant close a drawing and opening creates more problems.
I installed AutoCAD 2012 on a 32 bit windows 7 workstation but I received an error message."Cannot find acad.cuix customizastion file".I tried repairing the installation but it couldnt..I tried unistalling but won't uninstall..The machine was running previous versions of AutoCAD.
Is it possible with the hatch command to be able to select objects first instead of picking an internal point?I looked at this thread first which covers the same problem but not sure if there ever was a solution. URL....
HPDLGMODE is currently set to 2, I tried setting it back to 1 but that brings up the hatch popup window as it does in Classic mode and 0 does the same thing as 2.
Is there a way to add drop-down style buttons to the AutoCAD Classic workspace similar to the ones found in the 2D Drafting and Annotation workspace? (Ex. Drawing Circles, etc.)
Smoke classic shortcut is not working for Schematic vuew in CF, tried on three machines. Also why there is short cat for all "delete" "add" but not just plain move anymore. space M is not working. What's the logic?
I wan to turn this prompt off...period. Not fix it, just turn it off.
"The location of the selected file is not in the active project. To ensure that the file can be found when you open files that reference it, add the location to the project or move the file to a location specified in the project."
Looked through options, changed approproate setting to "Never". Still prompts.
running autocad 2012: there is an autopreview that shows what the command will look like before I hit return. How do I turn it off.
The issue is: I am overdrafting what Autocad is able to keep up with. I feel like I am now at half speed... I can replicate the same issue: offset x dimension; I move to left and hit enter; in the same instance autocad has autopreviewed right, and that becomes the command that sticks. really annoying... I have run ADT with bloated files on the same machine and not had this problem, so I figure its this feature that is causing the slowdown for me.
How do I disable the layout Tools Contextual tab in Civile3d 2012 so that is does not become active every time I change to Paper Space. I would like the ribbon to stay focused on the HOME tab when in paper space.
Is there some way we can turn off the auto highlight feature in inventor 2012? I am working in a large assembly and every time I move the cursor over the assembly it is trying to pre highlite parts and assemblys and it really causing alot of delay in my work.
I'm doing a program in Visual Basic 2010. In one of the forms I put a button that when clicked must open AutoCAD 2012 and make a drawing in it. The user will decide where to save it.The steps are these:
1. I added the references Autodesk.AutoCAD.Interop and Autodesk.AutoCAD.Interop.Common to the Visual Basic Project. That's OK.
Dim acadApp As New AcadApplication 'Create an instance of an AutoCAD Application AcadApp.Application.Visible = True 'Show the instance of the AutoCAD Application Dim acadDoc As AcadDocument 'Create an intance of an AutoCAD Document acadDoc = acadApp.Documents.Open("C:Respaldo TesisDibujo2.dwg") 'Open a Document called Dibujo 2 'Draw a line Dim PT1(2) As Double [code].....
I recently loaded several versions of AutoCAD on to a Windows 7 machine. ALL versions will open a drawing if double-clicked from windows explorer, but if I try to open through AutoCAD, the program freezes as soon as I click on the "Open" button. This is true for AutoCAD 2010 through 2012.
Machine Specs:
Dell Optiplex 990 250GB HD 8GB Ram I7-2600 proc AMD Radeon HD 6670 (1Gb) Video Card
I also cannot open multiple instances of ANY version of AutoCAD in Windows 7.
When I edit a part directly in an assembly, clicking on 'edit sketch' (frequently) changes the view from the one I had set while looking at the assembly. Is ther any way to turn this OFF?
I create MFC enclosures with various gasses. These enclosures can be quite large with three or more gas types. I create view representations with gas name and color the flow path for each gas in the named view. Is there a way to turn on all the colored overrides in one view to see all the various colors at once? I thought MASTER would show all colors but it does not. If not the only way would be to create the view of all gasses on and re-do all the work from all the prevous views.
How can I turn it off permanently? Or change the default to off? It's always on when I open my drawings.
I save the files with it off, but when I reopen, it's still on. A real pain in the butt when plotting since if I batch plot, all of my contours are off, which eliminates using batch plot entirely. Luckily, I only have 5 figures at the moment, but once we get to design phase I will have many more and require batch plotting.
I'm using civil3d 2013, I have never run into this before with any other versions.