Every since upgrading to Mavericks my Lightroom metadata browser has had missing numbers. It used to show the total count of photos that matched the criteria and it no longer does that.
View 2 RepliesWhen using the library filter on metadata no numbers are shown anymore, even not after clicking restore default presets?
View 2 Replies View RelatedI have subroutine that retrieves a list of detail numbers in a drawing. Sometimes there are missing numbers. I am looking to find a list of any missing numbers.
Example -
(setq List_DN (list 1 2 3 5 6 7 10 11 12 17))
Missing numbers are - 4,8,9,13,14,15,16
I would like a subroutine to take the List_DN are return the following missing numbers as text
(Get_Missing List_DN)
return
4,8-9,13-16
Ever since I updated to Mavericks on my Mac, Premiere Pro keeps freezing on me when I try to view file in folders through the Media Browser. I'm sure it's a Mavericks issue, but I can't reinstall all of my apps, nor do I have the time. Apple doesn't seem to respond to my questions (they get lost in there 1 million questions a day) discussion page.
View 1 Replies View RelatedI want to import a plug-in list of Keywords into Ligtroom 4. However - as described in Lightroom support - in Library under Metadata, I do not see the option for "Importing Keywords." I do see Keywording and Keywrod List, but there does not appear to be anywhere here to add an entire list with heirarchy levels. What am I missing?
View 4 Replies View Relatedmy product code is too short. I can't install Photoshop Lightroom 4.
View 5 Replies View RelatedThe metadata folder in the library module is missing in the right panel. It was present when I first purchased Lightroom 3 but has since disappeared from view, but don't know exactly when.
View 4 Replies View RelatedI want to reset the number for the sketches, extrusions, etc. in the browser tree of my template file to start with 01 instead of sketch48 and extrusion69.
I also want to reset the model parameters to start with d0 instead of d485.
The attached image show an example of a simple cylinder that I created from my .ipt template file.
I am using Lightroom 4.4 on a 2013 Macbook Air OS 10.8.4.
I cannot see the Switch enables auto sync on the Metadata sync button. Its currently visible on another machine a MacPro with Lightroom v4.3. I find this useful to be bale quickly enable and disable the syncing of metadata. Has this been dropped in v4.4 or have I missed a prefs setting somewhere?
As far as I can tell, Copy Metadata and Synchonize Metadata do the same thing. Is there a difference in what they do?
View 1 Replies View RelatedThere a few dodgy things goign on with my BOM.
I imported a BOM style from another drawing that worked fine, but when I edited the names of teh columns it broke everything again.
THere's a few thigns wrong.
There's no item numbers.
It says the QTY is incompatible units????
And there's teh funny table like icon with an arrow pointing to it with my parts highlighted blue. What does this mean?
Again, everything was fine until I changed the names of the columns and changing the naems back doens't fix it.
I've just downloaded the student revit-architecture, however even after reinstalling I cannot find the elevations in 'Project Browser'. I only have floor plans and ceiling plans. Is it hidden somewhere?
View 7 Replies View RelatedWhen working in an assembly model or part my 'find in browser' command has disappeared under the right click menu - why and how to retrieve it?
Inventor Professional 2013.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
My co-worker is working on his first Inventor project and he opened up Inventor 11 this morning and both his panel and browser bar are no where to be seen - yet checked off in the options as visible? What is the problem and how do we fix it. He used it two days ago and everything was fine.
View 7 Replies View Relatedhow can i open the project browser and properties box in revit 2013. they just disappeared.
View 3 Replies View RelatedI'm using Acad Architecture 2010, and my quick access toolbar does not have the Project Browser Icon, and my application panel has no Save or Open Project Browser either. I can only get to it by "Configure" in Project Standards panel. It is not in CUI.
View 1 Replies View RelatedI've recently upgraded to Win7 64bit. In Acad Architecture (trial versions 2010,2011 &2012)The content browser has nothing in it and the tool palettes aren't there.
View 2 Replies View RelatedIn ACA 2011 I have the project browser icon. This is easy to find and use in the 2011 quick access toolbar.
When I open the "Customize user interface" I find and select "Project Browser", then I see under the properties of the command I only see "Display" and "Advanced" nothing else is listed. This command is quite odd compared to other commands.
However, in ACA 2013 this icon is completely missing, I cannot find it in the quick access toolbar, when I search in the "Customize user interface" command list, I cannot find "Project Browser" in the search field of the command list.
How do I find the command for project browser so that I can drag it / steal it from another .cuix file?
Bonus Question: How do I stop the sheet set manager from always showing up? I use the sheets tab of the project navigator all the time.
I was working on a project adding topography and trees when revit crashed. I saved a recovery file which i then opened and saved over the old file. what I hadn't noticed was the the defaut site view in the project browser had gone missing. how to recover this view / plan which shows the topography, origin point and survey points etc?
View 1 Replies View Relateddoes lightroom 5 work with OS X Mavericks?
View 1 Replies View RelatedAfter updating to OSX Mavericks, Lightroom 5 will no longer start on my MacBook Pro. Checking the system log, I see only this:
10/30/13 8:56:00.390 AM spindump[21481]: Adobe Photoshop Lightroom 5 [21388] didn't gather any samples due to audio running
10/30/13 8:56:00.406 AM com.apple.launchd.peruser.501[170]: (com.adobe.Lightroom5.30128[21388]) Exited: Terminated: 15
why Lightroom 5 will no longer start?
Almost every time I switch in and out of Lightroom 5.2 running on OS X mavericks cursor and keyboard control freezes up for around 10-30 seconds. Other applications including LR still continue to work during this freeze up but the mouse cursor will not move and I just have to sit and wait for a little while and everything will resume normally after this delay.
View 9 Replies View RelatedIs Lightroom able to make use of Mavericks Tags as Keywords or will Keywords in Lightroom be recognized as Tags in Mavericks when browsing with Finder?
View 5 Replies View RelatedI have scanned something in OS X Mavericks (10.9.0) using my Canon PIXMA MP280 and am attempting to add it to my main Lightroom catalog (LR 5.2) but am having issues. I have tried the following formats with the noted results:
.TIFF - Lightroom throws error "The file appears to be unsupported or damaged. (1)" .JPG - Lightroom does not show the file in the import dialog, thus does not even attempt to import it. .PNG - Imports ok.
The .TIFF and .JPG formats seem compeltely intact as they open without any issues in OS X Preview and Pixelmator.
When I try to connect my Nikon D610 with a USB cable to import RAW files (i.e. .NEF), I need to open manually LR and click on the Import button to start importing even if Automatic Import is activated.
View 1 Replies View RelatedI am trying to link my parts list to a drawing however all balloons have different numbers.
I open the assembly and check everything out from vault I open my bom and change item numbers. When I get back to my drawing and apply for auto balloon I get completely different item numbers in my balloons. We just updated our software to a new 2012 version so it's maybe something with set up.
Is there a way to sync callout numbers to correspond with note numbers. When I add or delete notes in my drawings it takes to much time to update the callout number in the drawings. I need to figure out a way for the note and corresponding callout to change at the same time.
View 6 Replies View RelatedI hereby have a school note report from my little brother. He told me he had some bad notes in his last period and I would like to make a fake copy of it.
Basically, I scanned his 3th period notes and I would like to change some and add some
How you can remove numbers and add new ones over it and add numbers with the same digital code used on the old ones to put those in empty notes
I opened the drawing and then from the drawing opened the model. In the drawing it is showing the 4th instance of ROUND CRS-032175 X 33 as an assembly. It also is not showing in the view and yet the visibility is checked. AI2012 SP2
View 1 Replies View RelatedI am trying to use the Browsernode.addchild method to add an occurence to an empty browser folder. The code fails at this point and I gett an error pointing to the line "Call oTargetNode.AddChild(oSourceNodeDef)". I can add the occurence with the browserpanes.Reorder method without issue if the folder is not empty. The code is pasted Below.
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 29338 StartFragment: 314 EndFragment: 29306 StartSelection: 314 EndSelection: 314
SyntaxEditor Code Snippet
DimPrcsTpAsStringPrcsTp=InputListBox("Process Type?", MultiValue.List("ProcessType"), Parameter("ProcessType"), Title :="Select Process Type", ListName :="Process Type")DimRtgNameAsStringRtgName=PrcsTp&"-"&Parameter("NoRtgsInc")+1MessageBox.Show(RtgName, "Title",MessageBoxButtons.OKCancel)DimoAsmAsAssemblyDocument=ThisDoc.DocumentDimoMatrixAsMatrix=ThisApplication.TransientGeometry.CreateMatrixDimoOccAsComponentOccurrenceoOcc=oAsm.ComponentDefinition.Occurrences.AddVirtual(RtgName, oMatrix)DimoCompDefVirtualAsVirtualComponentDefinition=oOcc.Definition'CREATE AND SET THE
[code]....
When I press F1 Inventor opens the help on my default browser (Chrome), but when I click the bynocular it uses Internet Explorer.
Is it possible to force Inventor to use a browser of my choice or the default browser?