AutoCAD Inventor :: Item Numbers Missing From BOM
Oct 15, 2013
There a few dodgy things goign on with my BOM.
I imported a BOM style from another drawing that worked fine, but when I edited the names of teh columns it broke everything again.
THere's a few thigns wrong.
There's no item numbers.
It says the QTY is incompatible units????
And there's teh funny table like icon with an arrow pointing to it with my parts highlighted blue. What does this mean?
Again, everything was fine until I changed the names of the columns and changing the naems back doens't fix it.
View 3 Replies
ADVERTISEMENT
Feb 20, 2012
I am trying to link my parts list to a drawing however all balloons have different numbers.
I open the assembly and check everything out from vault I open my bom and change item numbers. When I get back to my drawing and apply for auto balloon I get completely different item numbers in my balloons. We just updated our software to a new 2012 version so it's maybe something with set up.
View 9 Replies
View Related
Feb 19, 2013
For some reason the item numbers in my parts list are blank. All the other information populates.
I've gone to the assmebly and varified that the BOM tabs are active and there are numbers in there.
If I inser the parts list as 'legacy' it works fine.
I can't use the renumber function, it just makes all theh item number boxes go yellow in the parts list box,
Inventor 2013.
View 9 Replies
View Related
Jul 18, 2013
I have subroutine that retrieves a list of detail numbers in a drawing. Sometimes there are missing numbers. I am looking to find a list of any missing numbers.
Example -
(setq List_DN (list 1 2 3 5 6 7 10 11 12 17))
Missing numbers are - 4,8,9,13,14,15,16
I would like a subroutine to take the List_DN are return the following missing numbers as text
(Get_Missing List_DN)
return
4,8-9,13-16
View 9 Replies
View Related
Jan 15, 2012
I've been using LR3 for over a year - current version 3.6. For no apparent reason, the 'Make second copy' menu item no longer shows in the import panel. Imported files are copied to the location specified the last time the item was available. I've looked in all of panels, but don''t find any way to disable the second copy function, or to manage the second copy function. I'm running MAC 10.6.8.
View 3 Replies
View Related
Nov 27, 2013
Every since upgrading to Mavericks my Lightroom metadata browser has had missing numbers. It used to show the total count of photos that matched the criteria and it no longer does that.
View 2 Replies
View Related
Nov 2, 2013
my product code is too short. I can't install Photoshop Lightroom 4.
View 5 Replies
View Related
Jun 20, 2011
Is there a way to sync callout numbers to correspond with note numbers. When I add or delete notes in my drawings it takes to much time to update the callout number in the drawings. I need to figure out a way for the note and corresponding callout to change at the same time.
View 6 Replies
View Related
Jan 11, 2012
In our company if we put a component in 5 different assemblies, we want that component to have the same item number no matter where it is in the parts list. In addition we group components to have a special item number... Meaning hardware like washer, bolts, and etc. to start with 500 series number.. Piping components would be 800 series...
Is there a way to do this in ILOGIC/VB?
View 2 Replies
View Related
Jun 16, 2011
I created a hatched sketch on one of my views to represent filler material. I want to balloon to this hatched area, but it want grab it. I have the filler material setup as a custom part. I can also create a sketched symbol for this, but it doesn't appear that they would accept it either.
I am currently running Inventor 2010 Build 272, Release: 2010-sp3
View 2 Replies
View Related
Mar 7, 2012
the "place item from vault" icon is grayed out and not available for selection. how do a place a stock part located in the vault, into an assembly i am currently working on?
View 2 Replies
View Related
Feb 13, 2013
I have a drawing in which I need to keep a part in the assembly but I don't want to display it on the BoM. Is there any way I can remove it from the BoM without removing it from the assembly and drawing?
View 3 Replies
View Related
Feb 21, 2011
When create assembly, i placed 3 parts in order: A.ipt, B.ipt, C.ipt
And ofcourse the item number will be:
A is 1
B is 2
C is 3
this number will be the same in: item colum (in BOM table), ballon (in 2D drawing).
The problem is: i want to change this number,
A will be 2
B will be 1
C will be 3 when i ballon the part in 2D
I've used "renumber" in BOM, but it just change value in "item" colum (in BOM table), not change in "ballon" (in 2D drawing).
View 3 Replies
View Related
Mar 13, 2012
is it possible to constrain an item twice to a base, because a task i'm doing requires a tank to be constrained to 2 completely different parts. What i've got so far is one end will go through the whole way.
View 2 Replies
View Related
Nov 4, 2013
I have a sketchedsymbol with leaderline. How can I get the BOM of the item this is attached to? I don't see any referenced way to do this. I assume it's possible because a balloon can get this info.
The full extent of what I want to do is to create a split balloon symbol. The top portion of the balloon with hold the detail number, the botton half will hold a user prompted text entry.
Win7 x64 - 16gb ram
i7 3610qm
FirePro M4000
Inventor 2013
ETO 6.1
View 8 Replies
View Related
Nov 25, 2013
I cant seem to find out how to assemble the spring to the rest of my item.
Will you be able to use the assembly if I do not provide the parts used(maximum 3 uploads)?
View 3 Replies
View Related
Jan 5, 2014
Curious, I am trying to get numbers 'engraved' (extruded) into a diameter of a dial ring. I was able to create a couple of planes to create the marking lines around the OD, but am unsure how to add numbers and extrude said numbers (in the easiest fashion possible). I need to go from 0 to 90 on the longest marking that starts at 0° and is every 36°.
Also, that being said, with the little I tried and was unhappy with, I created a text box at the 0° marker but the text was in the wrong rotation the marker and rotation box was greyed out. How can I resolve this...or is it even related?
File attached.
----------------------
Inventor 2014 PDS
View 2 Replies
View Related
Aug 29, 2013
I have an assembly made of three parts. There is ilogic in place to rearrange these parts in the assembly. The part numbers change depending on how the puts are arranged and there length. The part numbers come up fine in the assembly ( i have a window popping up to show them). However when i open the BOM the separate parts are listed but not with there part number just with there file name.
View 9 Replies
View Related
Aug 15, 2012
I am putting balloons on an assembly drawing, but the circle is not appearing. The arrow, leader and number are there, but no circle. What could be wrong?
View 4 Replies
View Related
Apr 19, 2013
I'm looking to get the file path of a selected part/assembly while inside of an assembly. I think I found something that can get it but the example is just different enough I can't figure it out and I don't have time to play with it. There also might be an easier way I couldn't find while searching.
This is the example code that seems to be able to do loads of things including get the full path, if you know what you're doing.
[URL]
View 9 Replies
View Related
Oct 18, 2012
I am designing a product that opens and closes - how can I represent this on the same drawing in Inventor?
View 1 Replies
View Related
Jun 4, 2012
in case of replacing a component in an assembly the present item number in (structured) BOM table is reassigned through a new one. This cause a lot of troubles in our firm, because this requires rework of item numbers after each replace action. I expected that especially in case of an replace of all occurrences, the item number is kept. Is there a setting to keep item numbers after a component was replaced?
Inventor Professional 2011
Windows 7 Enterprise 64bit
Dell Precision M4500
Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz
8 GB RAM
View 1 Replies
View Related
Apr 30, 2012
I just wondered if can I assign a particular ITEM number to a particular part, instead of relying on order in the assembly.
I unsterstand I can overrite it in BOM but can I have it controlled from the part, so any time I instert it into an assembly, this particular number in ITEM coulmn pops up?
View 9 Replies
View Related
Nov 26, 2013
I would like to obtain, in a structured parts list, the total number of ITEM in the sub-assembly.
See the picture attached for the example.
I have found an iLogic rule to create an user ipropertie in each part, with the total nomber of this part in all the assemby (included all sub-assemblies).
I would like to know if it is possible to obtain the total of this part only in the sub-assembly. Is it possible with an iLogic rule or VBA ?
View 9 Replies
View Related
Mar 13, 2012
I was hoping to address a document within the collection by name alone but it never seems to work regardless of which name i use.
Dim oDrawing as DrawingDocument: Set oDrawing=Thisapplication.Documents.Item("TEST.idw")
or
Dim oDrawing as DrawingDocument: Set oDrawing=Thisapplication.Documents.Item("C:WorkspaceTEST.idw")
PS The document is not in the visible documents collection as i don't want the user to see me opening and closing the reference documents.
View 2 Replies
View Related
Jan 17, 2013
I have several sheets w/in a drawing. Some of the sheets are titled sheet 2A, 2B, etc. I'd like to be able to do this w/o needing several title blocks. what becomes sheet 3 is now sheet 5. How do I offset the sheet numbers?
View 2 Replies
View Related
Nov 22, 2011
I have an ipart but I can't for the life of me get them to be in order, small to big in the browser.
I have them in order in the table but they are mixed up in the browser.
Is there a way to do this.
see attached picture
View 4 Replies
View Related
Jul 26, 2013
When I do a detailed set of drawings I first start with the overall and ballon the part showing the BOM. The following pages will reflect the detailed parts balloned on the first page. Is there a way, without haveing to manually type in the BOM, to reference which page this detail is on in the BOM?
View 9 Replies
View Related
May 15, 2012
I have a face plate with strokes on it to represent pressure increments.I cannot get the numbers onto the face plate.On the large stroke it starts at 0 and goes to 9 .. How do i add the numbers. Also i used extrusions for the increment strokes with circular patterns and mirror features.Is this how it should be modeled?
2013 EDU
View 5 Replies
View Related
Jul 9, 2012
When I created a parts list this morning the list started with item 2 and skipped item 8 as shown below.
why would it do that? I know I can renumber the list, but then when I expand the subassembly to show the subassembly parts, they stay numbered 10.1, 10.2 ect. even though the subassembly has become item 8 with the renumbering. If I expand the subassembly before renumbering, I loose the indented numbering format and simply get numbers 1 to 18. True I could manually renumber all the components, but what would be the reason the parts don't come into the parts list numbered sequentially to start with?
View 4 Replies
View Related
Sep 13, 2012
Is there an application or document setting that will make the default state of a row in a linked excel file used in a parts list default to "off" (not visble)?
More specifically, make this apply to added rows.
We have finish schedules in excel that everyone links a parts list to whenerver they need to display a finish schedule on the idw. However, when we add rows (new finishes) to the the excel finish schedule, they get displayed on the idw parts list next time the idw updates wether they are needed or not. Our practice is to only show finishes that are used on the drawing - so frequently a large portion of the whole finish schedule needs to be set to "off" or invisible.
View 3 Replies
View Related
