I created a hatched sketch on one of my views to represent filler material. I want to balloon to this hatched area, but it want grab it. I have the filler material setup as a custom part. I can also create a sketched symbol for this, but it doesn't appear that they would accept it either.
I am currently running Inventor 2010 Build 272, Release: 2010-sp3
Using Inventor 11...How do I change change the balloon (item 40) to read qty of 2? There are 4 total in the assembly, but this particular balloon only shows where 2 are, and another item 40 balloon will show where the other 2 are.
View 9 Replies View RelatedHow do I pick a part to balloon it when the line is actually two parts beside each other? eg a wall sheet welded to a square column. I can 'toggle" between the two but am unable to pick the other part so continually get the item balloon for the part I don't want.
Inventor Professional 2014.
Windows 7 64 bit.
I am trying to link my parts list to a drawing however all balloons have different numbers.
I open the assembly and check everything out from vault I open my bom and change item numbers. When I get back to my drawing and apply for auto balloon I get completely different item numbers in my balloons. We just updated our software to a new 2012 version so it's maybe something with set up.
The balloon tip that pops up is just an explanation of what the item is for or what it does when selected. I think I would be pretty safe in guessing that whenever a balloon tip appears there is a help button to go to any particular item. How these things can be disabled or turned off. I did find somewhere, a while ago, a way to edit the registry. But that was when I was using Windows XP.
Now I'm using Windows 7 and the only place these balloons get under my skin is in AutoCad. Which is vanilla AutoCad version 2010. I guess I have to give up trying to insert an image. I have a *.jpg file but no matter what folder I put it in this "insert image" function don't or can't see it for some reason.
I would like to make use of " find in feature tree" feature, but in DWG mode; Right clicking instead in BOM on part # and showing (highlighting) the balloon in the DWG so you know where it is that you put your balloon.
View 1 Replies View RelatedI am putting balloons on an assembly drawing, but the circle is not appearing. The arrow, leader and number are there, but no circle. What could be wrong?
View 4 Replies View RelatedI've created a shared sketch and have used it with various features. Sometime those features are suppressed. The model works fine but the shared sketch generates a sketch doctor error because the feature that created it has been suppressed. Is there anyway to make the sketch suppressed so it doesn't trigger a sketch doctor error? Inventor 2013
View 2 Replies View RelatedHow do I duplicate the 2D line work from a part level sketch into a drawing level (overlay) sketch?
I started a simple 2D piping system diagram sketch by opening a new part file and using a sketch to stick draw the system schematic including some annotations. Then I opened a new drawing file and made a base view of the part file to bring a view of the original sketch into the drawing.
I realize now that it would have been much easier to have created the schematic directly in a 2D sketch at the drawing level, which would have made editing the annotations much easier at the drawing level, and there is really no need for the part file to exist. I have no intention of creating a 3D model or "real" part in the .ipt file, was just using it as a jumping off point to sketch.
I was thinking that I could correct my error in judgment by just copying the sketch and pasting it into a new sketch on the drawing, but it doesn't want to work that way. I have tried copying both the whole sketch at the browser level, and the entire sketch contents (all of the lines and annotations) from the opened part sketch, but when I attempt to paste either of those into the drawing, paste does not seem to be an option. I'd rather not have to draw the whole thing again, as in typical fashion, my once simple sketch has grown in proportion and complexity from its simple beginning.
I was trying to query some sketch points data from a profile Path using code as below. However the program stopped without telling the reason.
Code below:
i = 0;
foreach (ProfileEntity oSourceProfileEntity in oProfilePath) { switch (oProfilePath[i].SketchEntity.Type) { case ObjectTypeEnum.kSketchArcObject: { SketchArc srcSkArc = default(SketchArc); srcSkArc = (SketchArc) oSourceProfileEntity.SketchEntity; // error points[i] = srcSkArc.StartSketchPoint.Geometry; break; } default: { SketchLine srcSkLine = default(SketchLine); srcSkLine =(SketchLine) oProfilePath[i].SketchEntity; // error points[i] = srcSkLine.StartSketchPoint.Geometry; break; } } i++; }
First we imported an ".igs" file to inventor, which produced "wires". Then by promoting the wires it produced a 3-d sketch.
The model is in one plane and 2-D, and we are trying to use Ansys 2-D analysis, but in-order to do so it needs to be in a 2-D sketch.
The model is too large to be redrawn on a 2-D plane, how to convert it to a 2-D sketch
want to change sketch 2013 into the sketch of 2010
View 1 Replies View RelatedIf you're displaying the part number in a balloon, is there any way to truncate what is shown?
e.g., I have a part number "abc12xyz89", and want the ballon to display only "xyz89".
I am preparing a weld map for our welding shop, and they would like me to balloon each joint and create a table with each joint's number, so that the welder/pressure tester can sign off. Is there a way to balloon joints and not parts, or make a custom ballooning scheme?
View 1 Replies View RelatedI am trying to modify the code Brian Ekins posted on Mod the Machine to renumber balloons across sheets. [uRL ....
It works great unless the item on the additional sheet is a sub-assembly. I believe it is because PartDef is declared as a PartComponentDefinition and there is nothing in the code to handle an assembly.
Dim partDef As PartComponentDefinition
Set partDef = drawBOMRow.BOMRow.ComponentDefinitions.Item(1)
partInfo(I - 1).ReferencedFile = partDef.Document.FullFileName
The Set partDef line was giving me a runtime error when it came to an assembly in the BOM until I added
"On Error Resume Next" at the start of the loop.
I tried changing the declaration to ComponentDefinition. It compiled fine, but didn't do anything. I think I'll have to add some duplicate code to handle an assembly in the BOM. Is there a better way to do this? Am I even on the right track?
How do I attach text to a balloon? For example, I want to add the text "2X" alongside the balloon to denote that there are 2 instances of this part.
I can't believe that you need to make a text box each and every time you need to do this! There has to be a simpler way.
If a balloon style is set to "Linear" the text in that balloon is automatically left aligned. If a balloon style is set to "None" the text in that balloon is automatically center aligned.
Is it possible to create a balloon with the balloon style set to "None", and have the text left aligned in a drawing document. Typically the balloon text is more that one line . The new line in inserted by pressing ctrl+Enter in the override value of the balloon.
I dont know if this is possible but what i am trying to do is create a custom detail ballon & outline similar to what is attached. this is how our client wants it to look & currently we create the detail & then sketch the outline & add a sketched symbol which has the identifier. We then turn off the detail layer which has the default outline.
View 1 Replies View RelatedWhen im replacing the balloon arrow it turns into a black dot. Pretty annoying to change all the dots to arrow everytime.
View 4 Replies View RelatedCan you attach text (qty or other info) to the side of a baloon or a point on the model view? If so can the qty update automatically?
View 3 Replies View RelatedI have an issue when using Auto Balloon.
Lets say for e.g. that I have 12 parts within an assembly, once auto balloon has done it’s job you notice that No. 9 balloon is blank and No. 10 balloon only shows 1 and not 10.
I'm using balloons to get information from parts, then writing that part info to a custom table. I need to keep track of which balloon corresponds to which table row.
Is there some object/property of Balloon where I can store a single number or string? I'm already using the value field, so that's unavailable to me.
Also, one balloon corresponds to one table entry. That means I cannot create a custom iProperty in the part the balloon is attached to since more than one balloon may reference the same part.
Win7 x64 - 16gb ram
i7 3610qm
FirePro M4000
Inventor 2013
ETO 6.1
I am trying to create & connect a Sketchedsymbol to a balloon. I was able to create the sketched symbol but, i was not able to connect to balloon.
The code is as below
Public Sub AddBalloonAnnotation()
Dim oGetPoint As New clsGetPoint ' custom class object
Dim oClick As Point2d
Dim DrawDoc As DrawingDocument
Dim oActiveSheet As Sheet
[Code] .......
When I edit certain sketched some other sketches disappear. see attached.
This is causing modelling to slow down as I can not project lines from the sketch that has disappeared.
After I create a adaptive part from projected sketch. How to modify the sketch? Please see the part attached.
View 6 Replies View Relatedwhat is the difference between a sketch and a planar sketch?
View 2 Replies View Relatedis it possible to create a custom symbol for my balloon?
View 2 Replies View RelatedIf we can access the Auto Balloon Command using Inventor Drawing API.
View 6 Replies View RelatedSo I have set up a new style for rotate balloon text in Inventor 2011. But I am running into a problem when I pull the balloon away from the view to have a leader it does not stay rotated.
View 1 Replies View RelatedI have little problem for synchronize balloon with part list where some times I put single component to main assy for create detail drawing. The problem is balloon from single component must change manually for synchrone with Part List. If number changed in part list sometimes I forgot for change balloon. So it's become miss match between balloon and part list. How to make this become synchron.
Please see attached file.
I can not auto balloon an ipn view in a idw file? I can select the view to auto balloon but can not select any parts.
Inventor 2013
GeForce GTX 580
Windows 7 64 Bit