AutoCAD Inventor :: Create Custom Symbol For Balloon?
Jun 17, 2013is it possible to create a custom symbol for my balloon?
View 2 Replies
ADVERTISEMENT
AutoCAD Inventor :: Numbers Are Added To Symbol When Using Symbol In Lieu Of Balloon
Mar 1, 2013The attached picture is me trying to balloon a part. I would like to just add some notes to the balloon so that I can update them manually but all I can find is to have a symbol. So I created a symbol, the insertion point for the symbol is shown. For some reason I get an extra number and the symbol offcenter. Why is this happening? What I'm really looking for is a balloon that is fully customizable so that I can just add text to the top and bottom and fill out the details.
View 5 Replies View RelatedAutoCAD Inventor :: Create Custom Weld Symbol
Dec 10, 2013Is there anyway to create a custom weld symbol in inventor? As of right now I am using a sketched symbol from autocad, but i would very much like to get away from this.
I need a bevel weld back gouged then ground flush on the back side. Cant do that as of right now with the inventor.
AutoCAD Inventor :: Custom Detail Balloon
Jul 15, 2013I dont know if this is possible but what i am trying to do is create a custom detail ballon & outline similar to what is attached. this is how our client wants it to look & currently we create the detail & then sketch the outline & add a sketched symbol which has the identifier. We then turn off the detail layer which has the default outline.
View 1 Replies View RelatedAutoCAD Inventor :: Auto Balloon Macro For Custom Sketched Symbols?
May 29, 2013I'm trying to create a macro which will attach a custom sketched symbol with a leader to some specific parts in a view. By modifying some sample code I managed to create a macro which will attach the sketched symbol to the currently selected edge (see code below). However I would like to select the view and let the code cycle trough all the parts and check the filename or a custom iProperty. If the filename has a certain pattern or a specific custom iProperty exists it should add the sketched symbol. I don't really see how I should do this, I can get a reference to the selected view and as far as I can see I can use the referencedfiledescripter to open the assembly and cycle through the occurences. However I don't see how I can use this to add the sketched symbol to the occurence in the drawing view.
' Set a reference to the drawing document. ' This assumes a drawing document is active. Dim oDrawDoc As DrawingDocument Set oDrawDoc = ThisApplication.ActiveDocument ' Set a reference to the active sheet. Dim oActiveSheet As Sheet Set oActiveSheet = oDrawDoc.ActiveSheet ' Set a reference to the drawing curve segment. ' This assumes that a drwaing curve is selected.
[Code] ......
AutoCAD Inventor :: Create Detail Identification Balloon In IDWs?
Sep 9, 2013How can i create a detail identification balloon in the idw's that prompt the user for the detail number and reference? Up to now we have been using sketched symbols balloon but are required to add the text manually as a second step. Is it possible in Inventor to combine this like easily done in Autocad.
AutoCAD 2011
Inventor Simulation 2011
Vault Professional 2012
AutoCAD Inventor :: Create Drawing Balloon Independent To Partslist Or BOMview
May 30, 2013As I know, the balloon in Inventor drawing (.idw) is always associated with partslist or BOMview, is it true? But the result is not always what I want. I have to override the partslist generated balloon manually many many occations.
Can I create an independent balloon where I can assign the number (or even alphabet text) directly. Is there any API to create such independent balloon which can attach to a drawing curve?
AutoCAD Inventor :: Reference Parts In A Subassembly / Unable To Create Balloon And Drawing
Jun 14, 2013I have assemblies that are comprised of reference parts - the assembly is a purchased part such as an air cylinder. I have them as reference only in the assembly (ie right click on the parts in the model tree->BOM Reference->Reference). I do it this way so I can adjust the air cylinder how I need it, but still only asign one part number to the whole assembly - as an example we'll say "cylinderX" is the part number, and filename is "cylinderX.iam"
The problem arises when I put cylinderX.iam into other assemblies and try and make drawings of those assemblies. Even though cylinderX.iam is not a reference part (but all it's sub components are), it shows up in an IDW just like reference parts. I am able to make it show up how I want by editing the view properties (Edit View->Model State Tab->Reference Data Line Style "as parts"), but I still cannot balloon cylinderX.iam. It shows up in the parts list, but I cannot attach a balloon to it.
Inventor 2013, 64-Bit
Dell Precision M6700
Windows 7 Pro
Intel Core i7-3820QM @ 2.70 GHz
16 GB Ram
NVIDIA Quadro K4000M
Space Navigator
AutoCAD Inventor :: Sketched Symbol With Custom Property
Nov 30, 2011I am trying to create a sketched symbol on the fly that has custom properties in it. I am also creating the custom properties on the fly. I need to get the actual expression for the property into the sketched symbol not just a value. I need this so that I can export the drawing as an autocad .dwg that has attributes in it.
View 3 Replies View RelatedAutoCAD Inventor :: Model Parameter Text In Custom Symbol
Jun 27, 2012Just installed 2013 Pro x64 and I'm doing a little testing. Using Tube and Pipe, I created a few mock pipe runs which are named according to a unique line number. When clicking on the Iproperties of any of these pipe runs, I can see that the value of model parameter "Part Number" now includes the name of the top level assembly and the line number, which is the name I assigned to the pipe run when I created it (see Fig 1 attached). Then in IDW I created a user defined symbol which contains text that I have directed to extract value of "part number" from the model properties, and fill in my symbol with that value (see Fig 2). The problem is, when I tag the pipe run with my custom symbol, the value in the symbol remains blank, instead of giving me the value of "part number". WHAT am I missing??
View 3 Replies View RelatedAutoCAD Inventor :: Model Custom Property To Sketch Symbol Definition
Sep 29, 2011How would i insert the "variable name" of a custom iProp to a sketched symbol definition (in an idw)?
I can plonk the value of the iProp in no worries, but to make it "live" is a bit beyond me...
Sub WeldNote()On Error Resume NextDim oDoc As DrawingDocumentDim SketchedSym As SketchedSymbolDefinitionDim oNoteDef As SketchedSymbolDefinitionDim oDefSketch As SketchDim oTextbox As TextBoxDim SNewText As StringDim sNoteText As StringDim oReffedDoc As DocumentDim lReffedWeldType As Long'Err.ClearIf
[Code].....
AutoCAD Inventor :: Creating Custom Dialogue To Edit A Sketch Symbol Text?
Jul 18, 2013What I would like to do is create a custom dialogue for each of 3 or 4 standard sketch symbols we use on a regular basis. I'd like to load 'suggsted' values out of an excel spreadsheet and allow the user to pick from them or enter in a custom text string if required. The values would then become part of the sketch symbol.
I've spent some time looking into iLogic rules and I think I've determined that they're not flexible enough to do what I want.
If I'm correct, it is possible (or a good idea) to do this using a VBA macro? I'm a little hesitant to go down the full blown add-in route. While I'm pretty confident I could work it out.
AutoCAD Visual LISP / AutoLISP :: Custom Balloon Notification
Sep 29, 2011Is there any way i can create my own custom balloon notification to alert the detail of any new or updated menu items?
View 2 Replies View RelatedAutoCAD Inventor :: How To Create ILogic Rule To Create Custom IProperties
Sep 30, 2013I'm trying to figure out how to create an iLogic rule that would create a Custom iProperties and put in what version of Inventor the file was last updated with.
View 8 Replies View RelatedAutoCAD Inventor :: Create Sketched Symbol With Prompted Text?
Feb 4, 2013Usually I use the TextBoxes. But its text would not change.
How to use vb.net to add a prompted text into the definition of a sketched symbol?
AutoCAD Inventor :: Create Combo List And Put It In Form Then In Text Into Symbol
Oct 30, 2012Create a form with combo box that user can choose one option for the line notes, would be 15 lines with 15 combos, and if necessary the user should be ale to type something insted of using that pre defined option from combo.
I have 2 ideas to make that work, untill now im trying with this 1º but nothing yet.
First Idea:
Create some (15) boolean parameters to enable each line of this NOTE and when the user choose or type one option, that text go directly to one textbox into a Symbol with the 15 lines. I actually dont know how to make this connection, tried some stuffs that found here on forum, but some are too complex.
Second idea:
Instead of create parameters to control everything, i would create all the controls by iLogic, but that is harder then create many and many parameters ? And by this way, i dont know how to conect one INPUTLIST BOX with a pre defined Global form, or, is easier to create a form by ilogic (if that is even posible ofc) ? And still dont know how to make the connection with the chosen option and the text box.
That is just to "centralize" all my notes, that can be variable for each drawing, that way i dont need to have too much symbols for each kind of note, or even have to type everytime that i need one diffent. Would be nice if the user could just choose them in the right sequence he wants.
AutoCAD Inventor :: Create A Text Direct Inside On Sketched Symbol
Nov 1, 2012With iLogic, define some pre notes and when the user choose one option some notes are chosen too.The idea now is: Create a text direct inside on Sketched Symbol OR edit some textfields inside the Symbol.
The symbol could be one existent, so its not necessary to create it.
I got a code to create the text, and that works perfectly! Just what im trying now is create this text into the Symbol... I've tried many ways with reference from: URLs....The code to create the tet im usnig is this one:
' a reference to the drawing document. ' This assumes a drawing document is active. Dim oDrawDoc As DrawingDocument oDrawDoc = ThisApplication.ActiveDocument ' a reference to the active sheet. Dim oActiveSheet As Sheet oActiveSheet = oDrawDoc.ActiveSheet ' a reference to the GeneralNotes object Dim oGeneralNotes As GeneralNotes oGeneralNotes = oActiveSheet.DrawingNotes.GeneralNotes Dim oTG As TransientGeometry oTG = ThisApplication.TransientGeometry ' Create text with simple string as input. Since this doesn't use ' any text.
[code]....
but, if i could just edit one existent text filed into the symbol would be great too and one "extra doubt", in all the codes that i get here, i have to erase the "public sub" and the "set" from all code, am I doing something wrong ? I'm running directly from the iLogic window.
AutoCAD Inventor :: How To Create A Custom Surface
Mar 24, 2013I have been trying to research how to create a custom surface. I found this article [URL]...... about how to to create a surface from a jpeg. The article says to "expand color on the top left." of the style editor. However, when I open the dialogue there is no "color" that can be expanded. The only thing in the top left of dialogue box is "lighting." Is there another step that the article misses, or is there another way for me to create a surface from a jpeg?
View 2 Replies View RelatedAutoCAD Inventor :: ILogic Create Custom IPropertie?
Mar 15, 2011I would like to create an new custom ipropertie with ilogic. The reason is the contentcenter, thei haven't custom iproperties. How should the code work:
if
propertie "test" is available
write the value in the propertie
else if
propertie test isn't available
create prpertie
write the value in the propertie
end if
How can i check if the propertie is already exists in the file?
How can i create a new custom iPropertie?
The rest of teh code is ready and works fine.
i've faund already some code with VBA but not with "pure" ilogic.
AutoCAD Inventor :: How To Create Custom Sketch Ribbon
Sep 14, 2012How to create a custom ribbon with sketches cmd... I found example for assembly context... it work well but I don't find how to do that in sketch mode... The goal is to control the cmd the user can use.
View 3 Replies View RelatedAutoCAD Inventor :: How To Create ISO Screw With Custom Pitch
Oct 11, 2013I need a screw M16 x 0.25 mm. However, I don't have the option "0.25mm". How to create a screw with custom pitch size?
View 2 Replies View RelatedAutoCAD Inventor :: Create A Custom Button Command
Jul 17, 2012I'd like to know if it is possible to create a custom button with existing command in inventor.
View 1 Replies View RelatedAutoCAD Inventor :: Create Custom Arrow Heads
Dec 21, 2008Is it possible to create your own custom arrow head for use with leaders, balloons, dims etc?
View 3 Replies View RelatedAutoCAD Inventor :: ILogic To Create Custom IProperty In Sub-component
Apr 1, 2013I found this code to create a custom iProperty in the current, open document:
Dim propertyName As String = "MyProperty"Dim propertyValue as String = "Test Value"customPropertySet = ThisDoc.Document.PropertySets.Item("Inventor User Defined Properties")Try prop = customPropertySet.Item(propertyName)Catch ' Assume error means not found customPropertySet.Add("", propertyName)End TryiProperties.Value("Custom", propertyName) = propertyValue
I have a iLogic rule that goes through each component of an assembly, counts how many times it occurs in the assembly, and then assigns that value to an iProparty (i.e. it inserts the total quantity of the part in some iProperty). Currently, however, it assigns the value to a default iProperty value, "Authority". I'd like, instead, for it to assign it to a custom iProperty called "Total QTY". However, I don't know how to tell Inventor to do the above code for a component in the assembly rather than the assembly itself. Below is my entire code. I've labeled where I'm guessing the above code should go. How I'd modify the above code to create the iProperty in the component being processed by the rule at that point?
Current
''True comment: Begin '''Commented-out Begin '''PartDocumentObject = 12290''AssemblyDocumentObject = 12291Dim openDoc As DocumentopenDoc = ThisDoc.DocumentDim docFile As DocumentIf openDoc.DocumentType = 12291 Then''If the open document is an assembly:''For each document referenced in this document:For
[code]......
AutoCAD Inventor :: Unable To Create Custom Tube And Pipe Style
May 20, 2013I can not create a new pipe section. İn inventor 2013, at the tube and pipe style
I watched these steps . still not
[URL].......
[URL]........
[URL]........
AutoCAD Inventor :: Unable To Create Custom Frame Member Part
Jun 28, 2010I created a template part, turned it into an I-part and published it successfully as a Frame Member.
The custom member was published into a custom library that is read/write. I was forced to create this library in order to publish the part.
When I go to use the custom profile with the frame generator, I am able to find the custom member in the dialog but when the frame generator tries to generate the part, I get this error message:
[WARNING] Frame Generator: Errors occurred during inserting Frame Member(s)
[WARNING] Insertion of frame member(s) failed
[ERROR] A frame member could not be created. The template file for Unnamed GIRT-2 could not be located in the Content Center library.
AutoCAD Inventor :: Find Balloon In DWG
May 3, 2013I would like to make use of " find in feature tree" feature, but in DWG mode; Right clicking instead in BOM on part # and showing (highlighting) the balloon in the DWG so you know where it is that you put your balloon.
View 1 Replies View RelatedAutoCAD Inventor :: No Balloon Around Numbers
Aug 15, 2012I am putting balloons on an assembly drawing, but the circle is not appearing. The arrow, leader and number are there, but no circle. What could be wrong?
View 4 Replies View RelatedAutoCAD Inventor :: ILogic To Create And Display / Insert Custom IProperties In Template
Aug 25, 2012Any way to use iLogic to create custom iProperties from the cells in an Excel spreadsheet (both text and numbers) for a .dwg template. The only thing even close has been a user who already knew how to do it and was having a different problem. I am using Inventor 2012 and Excel 2003 and have very little experience with VB. I currently have a family of assemblies, consisting of two parts linked to an Excel spreadsheet to control the various parameters for each variation of the assembly.
I need creating an iLogic rule that will:
Go to a specific tab (I have four different tabs/worksheets) in an Excel spreadsheet.
Make a specfic row of that worksheet the current row based on the part number used to generate the models of the assembly shown in a .dwg.
Use the contents of a cell in that row (text or numeric or a combination of both) to generate a custom iProperty for the .dwg template.
Use the custom iProperties to fill in the title block of the template.
AutoCAD Inventor :: Create And Define Multiple Custom Properties For Individual Sheets?
Apr 24, 2013the only property I can actually define for each individual sheet (for use in iLogic, text fields, etc.) is the sheet name. This is extremely limiting. Each sheet in my drawings has several properties of its own--sheet number (most importantly), what part is ON the sheet, the designer, the revision, etc. I would love to be able to use each of these in labels on the sheet, for example, a text box with "<Sheet #> - <Part> (<Designer>)". The only possible way I could do something like this is to use the sheet number as the Sheet Name, and then use that value in the sheet's text labels, headings, and title block. However, I want to be able to use descriptive names for the Sheet Name, plus that's just one property.
Is there any way I can create and define multiple custom properties for individual sheets? I was exploring the idea of using iLogic, using the ActiveSheet command, possibly, and "tricking" inventor into creating properties for a given sheet.
AutoCAD Inventor :: Truncated Balloon Contents
Sep 18, 2012If you're displaying the part number in a balloon, is there any way to truncate what is shown?
e.g., I have a part number "abc12xyz89", and want the ballon to display only "xyz89".