AutoCAD Inventor :: Picking Coinciding Parts For Item Balloon?
Sep 27, 2010
How do I pick a part to balloon it when the line is actually two parts beside each other? eg a wall sheet welded to a square column. I can 'toggle" between the two but am unable to pick the other part so continually get the item balloon for the part I don't want.
I created a hatched sketch on one of my views to represent filler material. I want to balloon to this hatched area, but it want grab it. I have the filler material setup as a custom part. I can also create a sketched symbol for this, but it doesn't appear that they would accept it either.
I am currently running Inventor 2010 Build 272, Release: 2010-sp3
Using Inventor 11...How do I change change the balloon (item 40) to read qty of 2? There are 4 total in the assembly, but this particular balloon only shows where 2 are, and another item 40 balloon will show where the other 2 are.
I am trying to link my parts list to a drawing however all balloons have different numbers.
I open the assembly and check everything out from vault I open my bom and change item numbers. When I get back to my drawing and apply for auto balloon I get completely different item numbers in my balloons. We just updated our software to a new 2012 version so it's maybe something with set up.
I have assemblies that are comprised of reference parts - the assembly is a purchased part such as an air cylinder. I have them as reference only in the assembly (ie right click on the parts in the model tree->BOM Reference->Reference). I do it this way so I can adjust the air cylinder how I need it, but still only asign one part number to the whole assembly - as an example we'll say "cylinderX" is the part number, and filename is "cylinderX.iam"
The problem arises when I put cylinderX.iam into other assemblies and try and make drawings of those assemblies. Even though cylinderX.iam is not a reference part (but all it's sub components are), it shows up in an IDW just like reference parts. I am able to make it show up how I want by editing the view properties (Edit View->Model State Tab->Reference Data Line Style "as parts"), but I still cannot balloon cylinderX.iam. It shows up in the parts list, but I cannot attach a balloon to it.
Inventor 2013, 64-Bit Dell Precision M6700 Windows 7 Pro Intel Core i7-3820QM @ 2.70 GHz 16 GB Ram NVIDIA Quadro K4000M Space Navigator
The balloon tip that pops up is just an explanation of what the item is for or what it does when selected. I think I would be pretty safe in guessing that whenever a balloon tip appears there is a help button to go to any particular item. How these things can be disabled or turned off. I did find somewhere, a while ago, a way to edit the registry. But that was when I was using Windows XP.
Now I'm using Windows 7 and the only place these balloons get under my skin is in AutoCad. Which is vanilla AutoCad version 2010. I guess I have to give up trying to insert an image. I have a *.jpg file but no matter what folder I put it in this "insert image" function don't or can't see it for some reason.
When I created a parts list this morning the list started with item 2 and skipped item 8 as shown below.
why would it do that? I know I can renumber the list, but then when I expand the subassembly to show the subassembly parts, they stay numbered 10.1, 10.2 ect. even though the subassembly has become item 8 with the renumbering. If I expand the subassembly before renumbering, I loose the indented numbering format and simply get numbers 1 to 18. True I could manually renumber all the components, but what would be the reason the parts don't come into the parts list numbered sequentially to start with?
Is there an application or document setting that will make the default state of a row in a linked excel file used in a parts list default to "off" (not visble)?
More specifically, make this apply to added rows.
We have finish schedules in excel that everyone links a parts list to whenerver they need to display a finish schedule on the idw. However, when we add rows (new finishes) to the the excel finish schedule, they get displayed on the idw parts list next time the idw updates wether they are needed or not. Our practice is to only show finishes that are used on the drawing - so frequently a large portion of the whole finish schedule needs to be set to "off" or invisible.
Nesting phantom iAssemblies within another iAssembly? We are having a problem with the BOM not generating the correct multi-item parts lists. Even though the individual iAssemblies act correctly when viewing there individual BOMs, when these parts are nested inside another iAssembly and switched (Table Replace) between individual items, the BOM shows all dash numbers as the current active one.
Any unresolved issues within iAssemblies and the BOM?
I have a drawing view of a part with a sketch that contains some lines. I need to pick one of the sketch lines.
I can pick a line with sketch active using the kSketchCurveLinearFilter
I have not been able to pick it from outside of sketch. Have tried using kDrawingCurveSegmentFilter to get a DrawingCurveSegment but I can not get the sketch line from the DrawingCurveSegment
I assume there is a way to get the sketch line from DrawingCurveSegment or DrawingCurveObject but have not figured it out.
I am new to Inventor, running Inventor 2012. I know Solidworks.
I have a sketch with ellipse and then squares inside the ellipse. I am trying to edit the part not create. The program extrudes either ellipse or squares. New problem: the extrusion is picking wrong sketch. I need to finish the part....
I would like to make use of " find in feature tree" feature, but in DWG mode; Right clicking instead in BOM on part # and showing (highlighting) the balloon in the DWG so you know where it is that you put your balloon.
I am putting balloons on an assembly drawing, but the circle is not appearing. The arrow, leader and number are there, but no circle. What could be wrong?
I am preparing a weld map for our welding shop, and they would like me to balloon each joint and create a table with each joint's number, so that the welder/pressure tester can sign off. Is there a way to balloon joints and not parts, or make a custom ballooning scheme?
I am trying to modify the code Brian Ekins posted on Mod the Machine to renumber balloons across sheets. [uRL ....
It works great unless the item on the additional sheet is a sub-assembly. I believe it is because PartDef is declared as a PartComponentDefinition and there is nothing in the code to handle an assembly.
Dim partDef As PartComponentDefinition Set partDef = drawBOMRow.BOMRow.ComponentDefinitions.Item(1) partInfo(I - 1).ReferencedFile = partDef.Document.FullFileName
The Set partDef line was giving me a runtime error when it came to an assembly in the BOM until I added
"On Error Resume Next" at the start of the loop.
I tried changing the declaration to ComponentDefinition. It compiled fine, but didn't do anything. I think I'll have to add some duplicate code to handle an assembly in the BOM. Is there a better way to do this? Am I even on the right track?
If a balloon style is set to "Linear" the text in that balloon is automatically left aligned. If a balloon style is set to "None" the text in that balloon is automatically center aligned.
Is it possible to create a balloon with the balloon style set to "None", and have the text left aligned in a drawing document. Typically the balloon text is more that one line . The new line in inserted by pressing ctrl+Enter in the override value of the balloon.
I dont know if this is possible but what i am trying to do is create a custom detail ballon & outline similar to what is attached. this is how our client wants it to look & currently we create the detail & then sketch the outline & add a sketched symbol which has the identifier. We then turn off the detail layer which has the default outline.
Lets say for e.g. that I have 12 parts within an assembly, once auto balloon has done it’s job you notice that No. 9 balloon is blank and No. 10 balloon only shows 1 and not 10.
I'm using balloons to get information from parts, then writing that part info to a custom table. I need to keep track of which balloon corresponds to which table row.
Is there some object/property of Balloon where I can store a single number or string? I'm already using the value field, so that's unavailable to me.
Also, one balloon corresponds to one table entry. That means I cannot create a custom iProperty in the part the balloon is attached to since more than one balloon may reference the same part.
So I have set up a new style for rotate balloon text in Inventor 2011. But I am running into a problem when I pull the balloon away from the view to have a leader it does not stay rotated.
I have little problem for synchronize balloon with part list where some times I put single component to main assy for create detail drawing. The problem is balloon from single component must change manually for synchrone with Part List. If number changed in part list sometimes I forgot for change balloon. So it's become miss match between balloon and part list. How to make this become synchron.
I am trying to get the balloons equidistant from each other and on the same horizontal "line", however when I try to place some balloons, I can not select the correct placement. The balloon is effectively acting like trying to put two magnets with the same polarity together... I just can't get it in the right place.