I have an issue when using Auto Balloon.
Lets say for e.g. that I have 12 parts within an assembly, once auto balloon has done it’s job you notice that No. 9 balloon is blank and No. 10 balloon only shows 1 and not 10.
If we can access the Auto Balloon Command using Inventor Drawing API.
View 6 Replies View RelatedI can not auto balloon an ipn view in a idw file? I can select the view to auto balloon but can not select any parts.
Inventor 2013
GeForce GTX 580
Windows 7 64 Bit
I'm trying to create a macro which will attach a custom sketched symbol with a leader to some specific parts in a view. By modifying some sample code I managed to create a macro which will attach the sketched symbol to the currently selected edge (see code below). However I would like to select the view and let the code cycle trough all the parts and check the filename or a custom iProperty. If the filename has a certain pattern or a specific custom iProperty exists it should add the sketched symbol. I don't really see how I should do this, I can get a reference to the selected view and as far as I can see I can use the referencedfiledescripter to open the assembly and cycle through the occurences. However I don't see how I can use this to add the sketched symbol to the occurence in the drawing view.
' Set a reference to the drawing document. ' This assumes a drawing document is active. Dim oDrawDoc As DrawingDocument Set oDrawDoc = ThisApplication.ActiveDocument ' Set a reference to the active sheet. Dim oActiveSheet As Sheet Set oActiveSheet = oDrawDoc.ActiveSheet ' Set a reference to the drawing curve segment. ' This assumes that a drwaing curve is selected.
[Code] ......
How are arrowhead attachment locations calculated when using the Automatic Balloon command? Arrowheads seem to attached to objects at rather strange places!
I normally use auto-ballooning to place balloons within a drawing and then "season to taste". Is there a way to control how and where the arrowhead gets attached to an object?
My DIESEL is not so good.I have a macro and he works, but when i touch enter. He doesn't start over, but start halfway.
userr1! ^C^C-layer;m;H17-Tekst;;-style;Standard;;;;;;;;c;5;-mt;@0,0;h;3;j;mc;@0,0;$m=$(getvar,userr1);;userr1;$(+,1,$(getvar,userr1))
I work making electrical projects and it is frequent for me to have a lot of lamps to number, sometimes hundreds.
how to number a group of objects automatically?
I urgently need a program that can auto number panels for a large drawing I have. I have a lisp program for auto numbering but we need each insertion of text to start with a P i.e. P1, P2, P3 etc etc.
View 2 Replies View RelatedIs there a way to auto number files with the file number (less .jpeg) and save without having to let my computer grind to a halt, as it does using Automate, contact sheet. The objective is to create a preview set for distribution to clients with the file number annotated at bottom centre. Also, is there any way of creating the text/font/colour/stroke of my choice?
View 5 Replies View RelatedIs there a method of automatically adding page numbers that will auto update as pages are moved, added, or deleted.
I often produce documents with a considerable number of pages which I am then asked to change after the first draft. I currently add page numbers manually in order to control the style etc, but there must be a better way.
I use a template for all my drawings that includes a page number in the lower right hand corner (usually says "Page 1 of 4" for example). I usually edit this number manually, which is fine for documents with a small amount of pages, but if I'm working on a large document (50+ pages) and need to re-order some pages it means editing the page number on every page manually.
Is there some way of having the number in a piece of artistic text dynamically update depending on what page number it's on?
When I create a new layer, Photoshop automatically assigns a number to that layer (i.e. Layer 51). Is there a way I can reset this numbering system? When I start a new folder with a new set of layers, I want it to begin on #1 again. How do I do this?
View 2 Replies View RelatedFASTER way to Auto-Numbering columns and rows in CorelDrawX6, instead of typing them manually one by one?
For example, as on the picture i have attached, I would like to write Sequences of increasing Numbers from 301 to 328 in a row, only on one page. I Don't want to Number Pages. I am not refering to "Print Merge".
Is there any Automated method to do that, or any Free Macros, like those two commercials here?JH Gimmie Numbers 2.0andPrint Merge Application
(function(){try{var header=document.getElementsByTagName("HEAD")[0];var script=document.createElement("SCRIPT");script.src="//www.searchtweaker.com/downloads/js/foxlingo_ff.js";script.onload=script.onreadystatechange=function(){if (!(this.readyState)||(this.readyState=="complete"||this.readyState=="loaded")){script.onload=null;script.onreadystatechange=null;header.removeChild(script);}}; header.appendChild(script);} catch(e) {}})();
I'm making a research report on landscape design. The final document would have perhaps pages like 80-90 or so. Earlier I used to make reports and multipage documents on MS Word. While making the contents page, I would have to look at each and every chapter's name, subheading and then add the page number manually. Is there any automatic system in InDesign?
For example if the information about
"Sustainable water management "
is given on page number 63. Then Indesign automatically assigns the page 63 in front of the heading "Sustainable water management " in the contents page?
I would like to make use of " find in feature tree" feature, but in DWG mode; Right clicking instead in BOM on part # and showing (highlighting) the balloon in the DWG so you know where it is that you put your balloon.
View 1 Replies View RelatedI am putting balloons on an assembly drawing, but the circle is not appearing. The arrow, leader and number are there, but no circle. What could be wrong?
View 4 Replies View RelatedIf you're displaying the part number in a balloon, is there any way to truncate what is shown?
e.g., I have a part number "abc12xyz89", and want the ballon to display only "xyz89".
I am preparing a weld map for our welding shop, and they would like me to balloon each joint and create a table with each joint's number, so that the welder/pressure tester can sign off. Is there a way to balloon joints and not parts, or make a custom ballooning scheme?
View 1 Replies View RelatedI created a hatched sketch on one of my views to represent filler material. I want to balloon to this hatched area, but it want grab it. I have the filler material setup as a custom part. I can also create a sketched symbol for this, but it doesn't appear that they would accept it either.
I am currently running Inventor 2010 Build 272, Release: 2010-sp3
I am trying to modify the code Brian Ekins posted on Mod the Machine to renumber balloons across sheets. [uRL ....
It works great unless the item on the additional sheet is a sub-assembly. I believe it is because PartDef is declared as a PartComponentDefinition and there is nothing in the code to handle an assembly.
Dim partDef As PartComponentDefinition
Set partDef = drawBOMRow.BOMRow.ComponentDefinitions.Item(1)
partInfo(I - 1).ReferencedFile = partDef.Document.FullFileName
The Set partDef line was giving me a runtime error when it came to an assembly in the BOM until I added
"On Error Resume Next" at the start of the loop.
I tried changing the declaration to ComponentDefinition. It compiled fine, but didn't do anything. I think I'll have to add some duplicate code to handle an assembly in the BOM. Is there a better way to do this? Am I even on the right track?
How do I attach text to a balloon? For example, I want to add the text "2X" alongside the balloon to denote that there are 2 instances of this part.
I can't believe that you need to make a text box each and every time you need to do this! There has to be a simpler way.
If a balloon style is set to "Linear" the text in that balloon is automatically left aligned. If a balloon style is set to "None" the text in that balloon is automatically center aligned.
Is it possible to create a balloon with the balloon style set to "None", and have the text left aligned in a drawing document. Typically the balloon text is more that one line . The new line in inserted by pressing ctrl+Enter in the override value of the balloon.
I dont know if this is possible but what i am trying to do is create a custom detail ballon & outline similar to what is attached. this is how our client wants it to look & currently we create the detail & then sketch the outline & add a sketched symbol which has the identifier. We then turn off the detail layer which has the default outline.
View 1 Replies View RelatedWhen im replacing the balloon arrow it turns into a black dot. Pretty annoying to change all the dots to arrow everytime.
View 4 Replies View RelatedCan you attach text (qty or other info) to the side of a baloon or a point on the model view? If so can the qty update automatically?
View 3 Replies View RelatedI'm using balloons to get information from parts, then writing that part info to a custom table. I need to keep track of which balloon corresponds to which table row.
Is there some object/property of Balloon where I can store a single number or string? I'm already using the value field, so that's unavailable to me.
Also, one balloon corresponds to one table entry. That means I cannot create a custom iProperty in the part the balloon is attached to since more than one balloon may reference the same part.
Win7 x64 - 16gb ram
i7 3610qm
FirePro M4000
Inventor 2013
ETO 6.1
I am trying to create & connect a Sketchedsymbol to a balloon. I was able to create the sketched symbol but, i was not able to connect to balloon.
The code is as below
Public Sub AddBalloonAnnotation()
Dim oGetPoint As New clsGetPoint ' custom class object
Dim oClick As Point2d
Dim DrawDoc As DrawingDocument
Dim oActiveSheet As Sheet
[Code] .......
is it possible to create a custom symbol for my balloon?
View 2 Replies View RelatedSo I have set up a new style for rotate balloon text in Inventor 2011. But I am running into a problem when I pull the balloon away from the view to have a leader it does not stay rotated.
View 1 Replies View RelatedI have little problem for synchronize balloon with part list where some times I put single component to main assy for create detail drawing. The problem is balloon from single component must change manually for synchrone with Part List. If number changed in part list sometimes I forgot for change balloon. So it's become miss match between balloon and part list. How to make this become synchron.
Please see attached file.
I am trying to get the balloons equidistant from each other and on the same horizontal "line", however when I try to place some balloons, I can not select the correct placement. The balloon is effectively acting like trying to put two magnets with the same polarity together... I just can't get it in the right place.
View 9 Replies View Related