I have a drawing in which I need to keep a part in the assembly but I don't want to display it on the BoM. Is there any way I can remove it from the BoM without removing it from the assembly and drawing?
View 3 RepliesIs it possible to make the column 'REV' automatically equal to the 'Item' column in attached BOM view? I manually added the values 1 to 5 in the REV column for example.
Maybe with some ilogic rule? I don't know if it's possible and/or where to start.
When i place a mono-part-detail on a assembly drawing i want to be able to place a leader referenced to the REV value. When this is possible there is a link between assembly item number and the mono-part leader.
If regsvr32 registers my AddIn DLL why does the .AddIn file require the Assembly item?
It seems to me that the path to my DLL is duplicated. It is present in the call to RegSrv32 as well as in the .AddIn file.
I may be missing something vital of course...
I'd like to create a macro that I can run from within an assembly that will loop through each BOM item and add the quantity req'd to a custom property within the component. I'm very familiar with VBA from Office, but I'm new to it with respect to Inventor so I'm pretty fuzzy with object titles and options.
Here's an outline of what I'd like to do:
Execute Macro from within Assembly file
For Each BOM Item to # of BOM Items
If Vendor = "Make" then
Set Component Custom Property "Qty_Reqd" = Total Qty from BOM
Endif
Next BOM Item
I have a subassembly that has been patterned.
I need to toggle the visibility of a part in that subassembly in each pattern element.
How do I refer to the part?
I have declared an object for my pattern, and can toggle the suppression on any element.
But I need to get at an individual component inside the element.
I've been trying something like this:
oPattern.OccurrencePatternElements.Item(X).Component.Visible("Valance Jig Frame - 1in:1") = False
I don't know how useful this will be but I was trying to figure out how to track what item number in an assembly any given part may be. I was thinking that on an individual part drawing I may want to reference the item number that is used in an assembly's Bill of Material for that part. I can't find where this may be stored for retrieval. If I do this I would want it to be automated so that if the BoM were renumbered the part file and drawing would update to the new item number.
This may not be possible since any part may be used in any number of different assemblies with different locations in a Bill of Material. Most of our assemblies use "one off" parts that are only used in that assembly so it may be possible in my particular situation to do this if there is a way to get at the BoM item number and connect it to the IPT file.
I presently have code that will select objects on screen based on particular stored object handles. The code then prompts the user to add additional selections once these handle selections are made. No problem. The problem lies with attempting to deselect the objects that were selected via object handles. I should say highlighted because that is what the present code is doing. It is highlighting the objects on screen. The code I am using follows:
Dim ids(1) As ObjectId ids(0) = ObjectIdFromHandle(myDocDB, "1D6") ids(1) = ObjectIdFromHandle(myDocDB, "1DE") Autodesk.AutoCAD.Internal.Utils.SelectObjects(ids) ' Get the Pickfirst selection
[Code]....
I took a picture with diffused morning sunlight coming through the trees, casting rays of sun and shadows on the other trees and ground however, behind the trees you can see a large house. I have tried things to remove / cover-up the house, however, it destroys the sun rays and shadows, is the someway to remove the house without destroying the suns effect?
CS5
I have a tool bar for all the macros that I use regularly.
While we can add shortcut icon onto the tool bar by simply drag and drop, I couldn't figure out the way to remove icon from the tool bar.
In Elements 12 is it possible to print a single item without having to go through add/remove items process? It seems to be set to print everything I have open as a default.
View 2 Replies View RelatedI am using INV 2012 and I wan to to know a trick how to convert the weldment assembly back to regular assembly template.
View 1 Replies View RelatedI'm looking for the best way to create a separate assembly out of various component parts in an existing assembly so that the whole thing can be placed in an assembly as you would a part, I know it's possible to demote components within an assembly but are there any other methods similar / better ?
View 2 Replies View RelatedWe have an iLogic assembly with to parts in it. Maybe to cylindrical parts. The iLogic rules should do the following.
1. Start a Rule after open document.
2. This Rule starts a Rule in the first cylindrical component.
3. This Rule ask the user for a diameter.
4. The assembly gives this new parameter value to the second component
5. Then the assembly calls another rule in the second component to change it with the new parameter
Everything is working fine when the following combinations are taking place:
1. I open up the assembly out of vault or from a local drive or an accessible server drive
2. I insert the assembly as sub assembly in another assembly from a local drive or an accessible server drive
It don't work with the following situation:
- I insert the assembly as sub assembly in another assembly out of vault
Then the user becomes the dialog "Choose a diameter" twice.
I don't know why, but I have the idea it has something to do with the functionality of inventor to insert a component more than once. If you insert a component in an assembly Inventor gives you the opportunity to add more than one occurence after each other.
change that behaviour? Maybe a switch to change that inventor "add more than one occurence" behaviour.
I have encountered a problem with the Tube and Pipe styles.
As you can see, I have a rack assembly with a custom tube and pipe style. A wire as a tube in orange, and a tube support in white. Both have their seperate colorations at a style in the tube and pipe styles editor
When placing the rack assembly into the main assembly, it reverts to the coppor coloration I changed from the original style.
Steps I've taken:
Exported the styles .xml and Imported the styles into the master tubeandpipe.iam
Imported the user created .xml styles into the main assembly file nothing seems to work
I am trying to find the interior volume of an assembly (when am I not?!?!) by subtracting the assembly from a block that surrounds the most of it. Somewhere the assembly has a "leak" and I have been trying to use the Cross Section Analysis to track down where the inside lump is connected to the outside lump to be subtracted. Is there a less time consuming way to dynamically drag a plane across and get cross sectional views?
Even better is there a simple way to animate the analysis plane moving across the block so I can hopefully just watch and pause it when I find a leak?
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
it is possible to make a constraint that utilized a parameter of a part within the assembly.
For example, if I wanted to use the thickness of a plate, which I defined in the part, could I call that parameter in a constraint?
My assembly has grown (about 50 parts) to where I need to consolodate some parts into subassemblies for reuse and alternate iterations of the basic design.
When I import the original parts into a new assembly, all of the constrains I created are not there of course.
I've tried creating a new empty part and then deriving a new part from the assembly, but I can't add, delete or edit any parts.
I looked at using Shrinkwrap, Substitutes, iParts, Multi-body Parts, and Multiple Solids but I remain confused.
In retrospect, maybe I should have created the subassemblies between the part and assembly stage but I didn't.
I want to be able to control the location/position of a component in an assembly. This is easy enough through the iProperties/Occurrence tab and then adjust the location of the X,Y, and Z offsets. Is this possible using iLogic? I have been unable to find a function to access via iLogic. Ultimately I am trying to translate a component about an axis not a pattern.
View 1 Replies View RelatedCan I select a bunch of parts in an assembly and say "save these pieces as a new assembly"?
It is just such a needed tool but I cant find an easy way to accomplish this.
I have a two part duct fire damper assembly. The IDW has the combined two part assembly, which I know how to turn the CoG on, so that it can be dimensioned. The problem is each piece will more than likely be hoisted separately so I would like to show the CoG for each piece, not the combined master assy.is there a way to do this?
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro
In our company if we put a component in 5 different assemblies, we want that component to have the same item number no matter where it is in the parts list. In addition we group components to have a special item number... Meaning hardware like washer, bolts, and etc. to start with 500 series number.. Piping components would be 800 series...
Is there a way to do this in ILOGIC/VB?
I would like to see if there is a routine that allows my iLogic code to detect if my assembly contains another assembly within it. If my assebly contains assemblies then I don't want "MyRule" to run. Else if it does then I want "MyRule" to run.
View 4 Replies View RelatedMy Assembly has two possible positions for my piston.
I would like to show both piston positions (top and bottom) in one drawing file; however, in different drawing views.
I have tried using LOD and Drawing View Representations, but it is my understanding that neither of these are meant to be used in this way.
I created a hatched sketch on one of my views to represent filler material. I want to balloon to this hatched area, but it want grab it. I have the filler material setup as a custom part. I can also create a sketched symbol for this, but it doesn't appear that they would accept it either.
I am currently running Inventor 2010 Build 272, Release: 2010-sp3
the "place item from vault" icon is grayed out and not available for selection. how do a place a stock part located in the vault, into an assembly i am currently working on?
View 2 Replies View RelatedThere a few dodgy things goign on with my BOM.
I imported a BOM style from another drawing that worked fine, but when I edited the names of teh columns it broke everything again.
THere's a few thigns wrong.
There's no item numbers.
It says the QTY is incompatible units????
And there's teh funny table like icon with an arrow pointing to it with my parts highlighted blue. What does this mean?
Again, everything was fine until I changed the names of the columns and changing the naems back doens't fix it.
When create assembly, i placed 3 parts in order: A.ipt, B.ipt, C.ipt
And ofcourse the item number will be:
A is 1
B is 2
C is 3
this number will be the same in: item colum (in BOM table), ballon (in 2D drawing).
The problem is: i want to change this number,
A will be 2
B will be 1
C will be 3 when i ballon the part in 2D
I've used "renumber" in BOM, but it just change value in "item" colum (in BOM table), not change in "ballon" (in 2D drawing).
is it possible to constrain an item twice to a base, because a task i'm doing requires a tank to be constrained to 2 completely different parts. What i've got so far is one end will go through the whole way.
View 2 Replies View RelatedI have a sketchedsymbol with leaderline. How can I get the BOM of the item this is attached to? I don't see any referenced way to do this. I assume it's possible because a balloon can get this info.
The full extent of what I want to do is to create a split balloon symbol. The top portion of the balloon with hold the detail number, the botton half will hold a user prompted text entry.
Win7 x64 - 16gb ram
i7 3610qm
FirePro M4000
Inventor 2013
ETO 6.1
I cant seem to find out how to assemble the spring to the rest of my item.
Will you be able to use the assembly if I do not provide the parts used(maximum 3 uploads)?
I'm looking to get the file path of a selected part/assembly while inside of an assembly. I think I found something that can get it but the example is just different enough I can't figure it out and I don't have time to play with it. There also might be an easier way I couldn't find while searching.
This is the example code that seems to be able to do loads of things including get the full path, if you know what you're doing.
[URL]