CorelDRAW X5 :: Cannot Open New Saved CDR Files
May 27, 2013All old saved files open OK, last 2 Days all saved files cannot open, but image is on thumbnail tried importing...says cannot import empty file..what have i done?
View 1 RepliesAll old saved files open OK, last 2 Days all saved files cannot open, but image is on thumbnail tried importing...says cannot import empty file..what have i done?
View 1 RepliesStill able to open files saved before yesterday just having problems to open recently saved files (all files since yesterday). It allows to save properly, on preview mode shows what is in the file, size of the file is correct as well. But when trying to open it opens as a blank page or is not opening at all.
Did a test- saved file with a simple objects / text only. Cant open.
plus- doesnt allow to copy & paste.
Reinstall all coreldraw package- still the same problem.
I'm having a problem when I use "save as" after working on a tiff in CS. It ends up in a "file" file that I can't open again. Does anyone know if it's a CS or a XP problem. Or something to do with pretty large files?
View 9 Replies View RelatedI work in a collaborative environment. I've upgraded to CS6, but those i work with are working in photoshop cs5.1. Will they have problems opening files i create or save in CS6?
View 5 Replies View RelatedI can't open files saved in X4 in v9. I couldn't figure out the text tool in X4 & saved the file so I could finish in v9 but v9 says it is not a valid PSP file. This is very frustrating since I need to be able to use v9 until I learn X4. Second, I have 64 bit version of Thumbnail view installed but it still doesn't allow me to see all of my PSP files in Windows Thumbnail view.
View 7 Replies View RelatedI saved Raw files to jpeg via bridge but now some of the jpegs won't open in CS5, they only open in bridge? How do I get them to open up in photoshop instead?
View 3 Replies View Relatedwhen i open or import it ,then that shows me "Read error" i can open it again.and it has large size, so i cant attach here....
View 3 Replies View RelatedI am having a problem with opening some files in Photoshop. I am using Photoshop CS5.1 Extended (Version 12.1) and have Windows 7 64 bit SP1 OS.
I am trying to open a few templates I made in PhotoShop for a client and they worked fine when I used them 3 weeks ago. All were saved as .psd documents. Now when I go to open them they no longer have the PS icon (to show they would be opened by PhotoShop). When I try to open them I get "Could not complete your request because it is not the right type of document." I have had this problem once before but it is confusing to me because 2 of the other similar .psd files I saved at the same timeframe(separate elements for the temlate) are perfectly fine, only the ones I need do not want to open.
I checked file properties and it claims these files are now Windows Shell Common Dll files.
I can't see a way to search for this issue that seems faster then looking manually. X4 will open X3 jpg's, but not X3 TIF's. X4 will open the older PSP files, but X3 TIF's show up as black rectangles in X4 workspace and won't open. I've uninstalled X3 already, but do not consider re-installing it as a solution. Previous versions of PSP have been backward compatible for me. If I open a RAW file, edit it and save as a TIF, it will open.
View 3 Replies View RelatedI have several book cover designs that I've been working on in CorelDraw saved as CDRs, but now when I go to open them, they open as CDRs in Corel Photo Paint, I don't understand why? I've tried the Open from File Menu and then Save As CDR , but it doesn't work either. Is it possible I clicked on something I shouldn't have? Also, I need to separate the background from one of the designs in bitmap, the image is as if its all grouped together and won't ungroup or let me edit it, I did not save in layers or masks (any other way I can still try and edit it?
View 5 Replies View RelatedI have saved a file in corel. on the second day, when i want to open the file,is writting: "File Copy Error" TEMP Drive or Output Drive may be Full" Is there any posibility to recover the file. The recovery toolbox can not recover the file.
View 14 Replies View RelatedI find when i open any file i have saved as an X6 file CorelDraw crashes ...the only way it works is if i open a blank template or older file (not saved in x6) first
View 11 Replies View RelatedI have the page numbering macro. It works on new files; however, it doesn't work on specific saved files. What could be wrong with those files? Is there any way to enable the page numbering macro in those files?
I use Corel Draw X3, by the way.
I have CorelDRAW X4, when I open some file(s), which takes long time to open, even which file size is smaller or bigger.
View 1 Replies View RelatedAbout a month and a half ago, after a microsoft update, I cannot open .cdr files from the file/open list. When going to file/open, the programs hangs up, cannot even use "cancel", and have to go to Windows Task Manager to shut down the program. All is well until I try to open a file from file/open.
I can import .eps, and everything else seems fine.My work around is to open from My Documents --Which works fine. Just is a silly little aggravation.
I have uninstalled, reinstalled, repaired, etc....all the normal fixes.
I've got an SVG file, it was generated by a program which generates such things, its completely valid according to the W3C validator. If I try to open it or import it into Corel X5, X5 crashes. I send off a WER to Corel hopefully (it says it sends it but one never knows for sure.)
My system Win XP (32 bit, SP3), 3.5GB of RAM, 500+GB free hard drive space..Corel X5 - I am pretty sure it has SP2 applied it calls it self 10.2.0.661 in the About menu.
I have 1 or 2 files saved in x6 that don't open under 6.1 I sent a note to Gerard with a link on the forum here, is there another place we should send files?I believe the problem is the powerclip of the fade, or the fade itself. But I have no way to prove that as I only have one copy of x6 so I can't open it and test it.
View 10 Replies View RelatedOne day I save documents in X5 and next day when I try to open the same document...Its not working
My whole document is empty...And this is not with just one file....Many of my documents r empty or just not opening....I m switching back to X4
I get and error, mainfram 0519 and 0538. I am unable to open old or new Corel draw files. Any way to allow me to open my old files.
View 2 Replies View RelatedEverything I have designed/built in Corel Draw v11, will NOT open in Corel Draw X6.
This is what I get when I try to open (File --> Open AND File --> Import) a Corel Draw v11 file from within Corel Draw X6.
I have looked at the galleries and saw some excellent pictures. Since then I no longer can open any file . I uninstalled Coreldraw 15 and even went to repair mode, still no luck. (I reinstalled and removed many times).
I reinstalled Coreldraw 14 and any file I work on and save and close I cannot open the file.
It seems I have picked up a virus from the pictures I uploaded from Corel gallery.
I am Using Coral Draw X3 & when i drag & drop or copy & paste image ( small aswell as big) takes time and in between it gets stuck & not responding message.
View 9 Replies View RelatedHalf a year ago I started on a project with a CD-cover that wasn't finished. Now when I want to open them, It's impossible. If I click on the files X4 opens and immediately crashes. On all CDR files. Same thing with X5. but I can open a CDR file in the folder next to this. Even the backup files seem to be corrupt. The CPT-files do however open fine.
If I start the program first and then open or import a CDR file, the progress bar halts at about 50 % and then nothing much happens.
Any chance of recovering the files, or do I have to rebuild everything?
I know one strange thing happened when I created the first file. I saved the Digipak format as a new page format and then that format stuck as default page size. I tried many times to reset it to A4, but I didn't succeed with that until I reset the workspace.
I checked the CDR files in ZIP format. In the XML file I coud see that the industry was identified as "music". How could that happen?
I just replaced the hard drive in my laptop. I have installed Coreldraw 12 again and it opens and works fine.
Problem is when I create and save a file. The file appears on the desktop ( if that is where I save it ) but it has an odd icon with a red A on the bottom corner. If I click on it, I get a "not a valid win32 application" message.
However if I open Corel12 and import the file, it appears to be fine.
I have been having problems opening old corel drw 11 jobs that i did.
Once i finish designing and close the files, it will not open the following day.
also some times i get an error message that the application you are using has become unstable and will need to close, and i always lose any ongoing projects.
I've seen many messages about this problem, for people using Corel X5 (and maybe X3 and X6) and Windows XP.
You double-click on the .CDR file name, but instead of the file opening, you get this error message:
If I drag the file to CorelDRAW, it opens. Same applies to .JPG and other files associated with PHOTO-PAINT.
I love CorelDRAW, but I'm convinced this is a BUG that seems to be ignored. It's been around for years. It's basic to how Corel works and works with Windows--I don't understand why they don't fix it. This is quite an annoyance; the good thing is I can always open the file by dragging it.
CorelDRAW version is 15.2.0.695. WinXP is Professional Version 2002, SP3. Found no answer in the Corel Knowledgebase. Never had this problem with CorelDRAW v.2-12.
I tried to open file's that I created recently in X3 and they will not open. when i try to open them they appears as blank page and they show nothing
all of my Cdr files be corrupted . they show their real size (eg 23mb ) but when i open them it show white page. Even the tumbnail pic shows only corel draw pencil and when i want open them on corel or import in it This error message appears : D: 01.cdr" is not importable using the selected filter, or this format is not supported
Having trouble opening an svg file in X6. Crashes both X5 and X6.
File available here : [URL] ....
discovered a program crash while opening a Corel v.8 file created with Corel X5. Any other version of exported files works probably, only if exported compatible to v.8 reopening with Corel X5 causes a program crash.
View 2 Replies View RelatedI'm unable to open/import .ai files into corel x4. Getting "corrupted file" error.
View 5 Replies View RelatedEvery time when i open a .cdr, coreldraw open the file in same file that i have been open before.
How i can make coreldraw to open files into new files not into opened ones ?