Everything I have designed/built in Corel Draw v11, will NOT open in Corel Draw X6.
This is what I get when I try to open (File --> Open AND File --> Import) a Corel Draw v11 file from within Corel Draw X6.
I'm having issues with CS5 shutting down when I attempt to open a file. I have reinstalled it to no avail.
View 1 Replies View RelatedThe screen shot below shows a patently false error message when attempting to open a 13.3 MB .PICT file in Photoshop 13.0.5 under Lion 10.7.5, while there are clearly over 15 GB of free, unused RAM, and over 500 GB available for scratch.
I'm showing this only to highlight the unreliability of "not enough RAM" error messages that can send a user on a futile wild-goose chase.
The file is obviously corrupted, as it is the result of a futile attempt to extract any image files in a rescued archive of some sort (from the infamous Webshots by Smile site that recently caused millions of images from thousands of former Premium account holders to be lost). But there's definitely not a RAM problem here. Other, healthy files of over 1 GB open without any problem.
Just installed coreldraw 12 on new pc. but when i import any jpg picture coreldraw shuts down. I can open an old file and work on it ok but still shuts down when I import or paste any jpg.
View 5 Replies View RelatedHere are the specs on my hardware;
iMac 27" (2011)
OS X 10.8.4
HD 2Tb (1.2Tb Free)
12Gb RAM
3.4 GHz i7 processor
No other applications running and Photoshop has access too 100% of the RAM.
I made a mistake and attempted to install LRcc on mac os 10.6.8. I now understand that this in not supported. Now, when I go back to LR 4, it will open some catalogues, but not the one with the most work in it. Naturally, I have done quite a bit of work since my most recent backup.
View 2 Replies View RelatedI received PSE 8 in a bundle with a Bamboo tablet. I loaded it up and have been editing pictures just fine. Yesterday I downloaded and installed some actions from MCP's site and messed with a few of them. Today I downloaded and installed the MCP Facebook actions. I was able to mess around with it a bit along with some other action until after a few minutes I reveived a message from Adobe telling me that it has detected that a program closed unexpectedly and asked if I wanted to send an error report, which I have. I gave it a rest for a while but it is still crashing. I can get into the Organizer but when I attempt to go into any of the edit areas, it will load up and after a few seconds I get the message. I am using Windows 7
View 2 Replies View RelatedI have CorelDRAW X4, when I open some file(s), which takes long time to open, even which file size is smaller or bigger.
View 1 Replies View RelatedAbout a month and a half ago, after a microsoft update, I cannot open .cdr files from the file/open list. When going to file/open, the programs hangs up, cannot even use "cancel", and have to go to Windows Task Manager to shut down the program. All is well until I try to open a file from file/open.
I can import .eps, and everything else seems fine.My work around is to open from My Documents --Which works fine. Just is a silly little aggravation.
I have uninstalled, reinstalled, repaired, etc....all the normal fixes.
I'm using AutoCAD Mech 2008. is there a way to publish multiple dwg files to individual pdf's.
Right now I typically plot to Adobe PDF, extents/center to plot/fit to paper/monochrome.
Upon doing a search, someone mentioned "AutoPublish" upon closing. Is this an option, and if so, is it my only option?
All old saved files open OK, last 2 Days all saved files cannot open, but image is on thumbnail tried importing...says cannot import empty file..what have i done?
View 1 Replies View RelatedI've got an SVG file, it was generated by a program which generates such things, its completely valid according to the W3C validator. If I try to open it or import it into Corel X5, X5 crashes. I send off a WER to Corel hopefully (it says it sends it but one never knows for sure.)
My system Win XP (32 bit, SP3), 3.5GB of RAM, 500+GB free hard drive space..Corel X5 - I am pretty sure it has SP2 applied it calls it self 10.2.0.661 in the About menu.
I have 1 or 2 files saved in x6 that don't open under 6.1 I sent a note to Gerard with a link on the forum here, is there another place we should send files?I believe the problem is the powerclip of the fade, or the fade itself. But I have no way to prove that as I only have one copy of x6 so I can't open it and test it.
View 10 Replies View RelatedOne day I save documents in X5 and next day when I try to open the same document...Its not working
My whole document is empty...And this is not with just one file....Many of my documents r empty or just not opening....I m switching back to X4
I get and error, mainfram 0519 and 0538. I am unable to open old or new Corel draw files. Any way to allow me to open my old files.
View 2 Replies View RelatedI have looked at the galleries and saw some excellent pictures. Since then I no longer can open any file . I uninstalled Coreldraw 15 and even went to repair mode, still no luck. (I reinstalled and removed many times).
I reinstalled Coreldraw 14 and any file I work on and save and close I cannot open the file.
It seems I have picked up a virus from the pictures I uploaded from Corel gallery.
I am Using Coral Draw X3 & when i drag & drop or copy & paste image ( small aswell as big) takes time and in between it gets stuck & not responding message.
View 9 Replies View RelatedHalf a year ago I started on a project with a CD-cover that wasn't finished. Now when I want to open them, It's impossible. If I click on the files X4 opens and immediately crashes. On all CDR files. Same thing with X5. but I can open a CDR file in the folder next to this. Even the backup files seem to be corrupt. The CPT-files do however open fine.
If I start the program first and then open or import a CDR file, the progress bar halts at about 50 % and then nothing much happens.
Any chance of recovering the files, or do I have to rebuild everything?
I know one strange thing happened when I created the first file. I saved the Digipak format as a new page format and then that format stuck as default page size. I tried many times to reset it to A4, but I didn't succeed with that until I reset the workspace.
I checked the CDR files in ZIP format. In the XML file I coud see that the industry was identified as "music". How could that happen?
I just replaced the hard drive in my laptop. I have installed Coreldraw 12 again and it opens and works fine.
Problem is when I create and save a file. The file appears on the desktop ( if that is where I save it ) but it has an odd icon with a red A on the bottom corner. If I click on it, I get a "not a valid win32 application" message.
However if I open Corel12 and import the file, it appears to be fine.
I have been having problems opening old corel drw 11 jobs that i did.
Once i finish designing and close the files, it will not open the following day.
also some times i get an error message that the application you are using has become unstable and will need to close, and i always lose any ongoing projects.
I've seen many messages about this problem, for people using Corel X5 (and maybe X3 and X6) and Windows XP.
You double-click on the .CDR file name, but instead of the file opening, you get this error message:
If I drag the file to CorelDRAW, it opens. Same applies to .JPG and other files associated with PHOTO-PAINT.
I love CorelDRAW, but I'm convinced this is a BUG that seems to be ignored. It's been around for years. It's basic to how Corel works and works with Windows--I don't understand why they don't fix it. This is quite an annoyance; the good thing is I can always open the file by dragging it.
CorelDRAW version is 15.2.0.695. WinXP is Professional Version 2002, SP3. Found no answer in the Corel Knowledgebase. Never had this problem with CorelDRAW v.2-12.
I tried to open file's that I created recently in X3 and they will not open. when i try to open them they appears as blank page and they show nothing
all of my Cdr files be corrupted . they show their real size (eg 23mb ) but when i open them it show white page. Even the tumbnail pic shows only corel draw pencil and when i want open them on corel or import in it This error message appears : D: 01.cdr" is not importable using the selected filter, or this format is not supported
Having trouble opening an svg file in X6. Crashes both X5 and X6.
File available here : [URL] ....
discovered a program crash while opening a Corel v.8 file created with Corel X5. Any other version of exported files works probably, only if exported compatible to v.8 reopening with Corel X5 causes a program crash.
View 2 Replies View RelatedStill able to open files saved before yesterday just having problems to open recently saved files (all files since yesterday). It allows to save properly, on preview mode shows what is in the file, size of the file is correct as well. But when trying to open it opens as a blank page or is not opening at all.
Did a test- saved file with a simple objects / text only. Cant open.
plus- doesnt allow to copy & paste.
Reinstall all coreldraw package- still the same problem.
I'm unable to open/import .ai files into corel x4. Getting "corrupted file" error.
View 5 Replies View RelatedEvery time when i open a .cdr, coreldraw open the file in same file that i have been open before.
How i can make coreldraw to open files into new files not into opened ones ?
i hav a problem with x6 version
when iam open x5 files in x6 the Fonts are Disturbed, & change the places
how do i open pdf special edition files in Corel X4? i can view it as a pdf but I can't get it into corel to see it's dimensions or anything.
ps. haven't been here for quite a while. guess it's a good thing I haven't had a bunch of questions as usual
I have recently installed Corel X6 and have found it to be painfully slow when opening files. At first I had thought it might be a network issue so I copied the file to a local drive and experienced the same problem.
The file is only 819Kb but it takes about 3 minutes to open the file. When I first select the file in the File Open dialogue window Corel just hangs for about 1 minute. It finally responds then takes a further 2 minutes to process and open the file.
I have turned off my antivirus software as I thought this might be a file scanning issue but still the same result.
I use CorelDRAW on a daily basis and recently the program takes a lot of time to open/close/save my files, or sometimes it'll simply freeze.
View 6 Replies View Related
