I started a VSX5 project that my friend wanted to piggyback on with his VSX4 software . He tells me that VSX4 opens but nothing seems to happen afterwards. Does it mean that VSX4 is incompatible with VSX5 .vsp file projects ?
View 2 RepliesWhen I try to open a vsp project in X5 using Windows 7 I am getting an error message saying, File is already in use, and a number 15055:1:1. I have been using this computer with X5 and XP professional and it works fine. I have a selection of vsp files that I use as templates, the only time I have had this message before is when I had my template vsp files write protected, which I have stopped doing. I have now installed Windows 7 on this same computer but cant open any of my previous projects. These projects were created using X5.
View 3 Replies View RelatedIs there any way to copy a project from Final Cut Pro (fcp) and open in VideoStudio? I have someone who has done hundreds of hours of work on a video and I'd like to take over the project... but he used FCP.
I know I can have him produce a the video and then open it back up as a video, but I'm hoping to avoid the loss inherent in such a move.
My problem appears when I open a saved project. Only when I open one certain file. All run perfect when I open others saved files. The error is:
"The program has encountered an unspecified erros and has stopped functioning. Please contact Corel Technicial Support and send the dump file for analysis.
The name of this file is: C:/User/home/AppData/Local/Temp/vstudio_16.1...... DMP"
I've built a project up with several smaller project file components. It's an easier way to create a video than editing one big project.
Opening the overall project and running it on screen is not a problem. However, when I try to create a smart package of the composite project, I get a consistent error message rejecting the process because of the existence of the component vsp's.
Is there a way to avoid the error and create a smart package from a project file that has smaller component project files?
How do I open the project bin in PS cs6?
View 1 Replies View RelatedI was working on a rather large project in Adobe After effects (i spent 5 hours on it) The next day i went to reopen the file to make a few minor adjustments this error appeared : this project took a long time and i don't want to have to do it again!
View 2 Replies View RelatedI have build a project in CS6 and it was working fine until late last night.
When I try to open it, it get to 81% and then stops. The software then crashes if I try to do anything.
I have deleted some of the source file the project it useing but this should not stop it from opening.
PSE I have never seen the Project Bin, only 'show project bin' option 1. have tried Edit > Preferences > General> Autohide = no change 2. have tried Window > Project Bin = no recognition or change.
View 18 Replies View RelatedEverytime I try to open my Project File in After Effects CC, it tries to open it, but then freezes. Really frustrating and this project is for a job that I am doing. Put in a lot of work to start over again.
View 8 Replies View RelatedJust downloaded the demo of CS6, but am having a nightmare trying to open my CS5.5 project. I get the following error message After Effects error: crash occurred while invoking effect plug-in "Shadow/Highlight".
I tried opening a different project, and a similar error occurs, but with a different plugin. This time it's the Paint plugin. After Effects error: crash occurred while invoking effect plug-in "Paint".
Moved Videostudio X4 from a Win 7 machine to a new Win 8 PC.
Again it seems, audio plays fine when playing a clip from the preview window but not when playing on the timeline. (I had a similar problem with X10 and reported it in an older thread.)
Am searching now for more patches (and yes, I'm aware X6 is now the current version) but nothing obvious at the moment. Have found the SP 1/2/3 downloads on Corel's pages, but as it already upgraded to SP3 just after install, I'm guessing SP 1 and 2 are already covered..
In the past I've used a Panasonic SDR-S7 video camera which produces MPEG files with no problem.
I now have a Panasonic Lumix still camera which also takes AVCHD video. The individual files play perfectly in VS12, but as soon as I try to play the project to preview it, the picture keeps freezing. I thought this could be due to the new video's being HD but I don't think the individual files could be played either.
I have been doing this project in X5 and was putting a still picture at the end. When I review the project it stops about a second or so from the end. I thought it was the song, so I took that out.
I changed the picture, did the same thing. I lengthen the time on the picture, it will place and stop about the same time from the end. Doesn't matter how long the picture is playing. If I take the picture out, the video just before it plays fine. I put a picture back in, and it does the same thing? I thought the project time may be set someplace? Doesn't seem to matter because I change the timing on the picture at the end. Stops the same place?
Certainly couldn't open an X3 in X4. If I wanted to edit/burn my X4 in the "faster" X5, why should I essentially start from scratch to take advantage of X5?
Project would be SAVED as an X5 project file, of course.
I add a video to the timeline video track (not the overlay track), and with 'clip' selected and playing... I have audio just fine, for the most part... sometimes the audio jumps and skips, and sounds garbled. With 'project' selected and the video playing, either the same thing happens as the 'clip' or there is no audio at all.
What I have discovered, is that this is common with AVI files. Other files, such as WMV, don't seem to have this problem. It affects only AVI files. The video plays just fine in WMP and VLC, as well as other video editors such as PowerDirector... so why dos VideoStudio have this odd sound issue? And I'm sure as Hell not gonna convert all my videos to WMV just to edit them.
This is on a fresh install of VideoStudio Pro X4 (as well as Windows), no updates, no Service Packs, no nothing... even WITH SP1 it's still does it. I've also removed and reinstalled my codec packs (from K-Lite to Shark007) with no difference.
I've also hear that people are now having this issue with VS Pro X3 as well (I have X3 to) so I assume it's pointless to install X3 as well. I really do NOT like using any editing software other than X4, since it's the best one I've used... so I do not want a reason to use something else.
I've recently upgraded the PC and re-installed VS10 onto the new, improved, beast in front of me now, but have hit a hurdle.
Whether I'm looking at an imported project or starting a new one from scratch, I seem not to be able to get the audio tracks to play when playing the project as a whole.
I can select the music track and play it from within the timeline without a problem, but select the project and all I get is the sound of silence.
after scanning and searching the forum I can't find anything that fits my bill so far.
Drivers have been checked and updated where found wanting. I'm at a loss to explain why. I never had this problem back on the old slow-coach...!
For info I'm running Vista on a dual core 2600Ghz machine with Asus P5K Pro 'board (on-board audio) and a GeForce 8600 GTS graphics card.
I'm green with Videostudio as i use pinnacle before.
The version I use is X5, I want to make a very good quality photo album with the videostudio, I want to make the blu ray, what do I need to set before I start the project? What resolution should I set and where can I set? someone said the AVCHD is the same as bluray, I don't know!
I recently upgraded to x6. My question is, there were some hd project templates that came with x3 that id like to use with x6. How to do this, or import or find the files?
View 5 Replies View RelatedI want to burn my project I have created on VSX4 to a DVD. I don't want to create a menu or add chapters or anything else, I just want to burn my project to the DVD. I have followed the instructions in the user guide to bring my project in to be burnt, but the next button remains greyed out so I can't go to the next step to enable it to be burnt.
View 5 Replies View RelatedI finished the DVD, looks great, now I want to make another DVD the next day. How do I recover the project? In VSX3 made it really easly to recover DVD projects with all the menus, chapters and any other setting. Where does VSX4 save the finish project at?
View 2 Replies View RelatedI have VideoStudio X4 pro, think the sales man did a great job as i'm a beginner and man o man this isn't what i thought it woud be I'm trying to save my pictures to cd, it burns in and when i go to play it on the video, it won't work, just comes up black? Have slected create disk image, have used the cd-r before to do a similar thing and it won't work.
View 3 Replies View RelatedAudio in clips (video or audio) plays but will not play in project preview or in created video files or DVDs.
Devices:
No special devices just the normal PC setup (using 3 monitors).
Video Studio version:
VSX4 Pro: SP1, SP2 and SP3 added with nothing else added (templates etc).
Source files:
Codecs Note:
I first tried VSX4 with only the codecs on the PC from a new install - that is a total wipe of the two SSD drives in the PC and a reinstall from 'clean' of Windows 8 Pro on the 'c:' main SSD and a new install of VSX4.
The PC then had adobe flash player added - mainly just for 'YouTube', 'DivX' and 'Xilisoft - Video Convertor Platinum' - a package I have used extensively before and along sided VSX4 without issue.
When I found that the audio issue continued I installed the latest available 'K-Lite' package via 'CNet - Downloads'. Throwing codecs at the problem is not necessarily I have used 'K-Lite' on and off for years though and have had no issues from 'K-Lite' (with VSX4).
Regarding .avi:
I am told there are some 800 plus known versions of files that have the .avi extension and this is problematic. However, I have tried many files and converted some to the somewhat 'standard' DivX, Xvid or H.264/MPEG 4 and had no luck thus far!
Have tried various source files from various sources. Have mostly tried .avi (DivX /Xvid) files but have also tried mpeg and mpeg 2. Have tried converting files from one type to other also.
I use the audio as it is per file and have tried splitting the audio and saving it as a .wav directly from VSX4 then using that .wav as a voice or music track. Split audio works in independent player (Windows Media Player) and plays directly in VSX4 as a clip but not when playing the project.
Project Properties:
PAL (25 fps)
MPEG files
24 bits, 720 x 576, 25 fps
Upper Field First
(DVD-PAL), 16:9
I have not deliberately set any of the properties manually and they seem correct for my usage.
PAL or NTSC:
In the UK using Pal.
Error Codes:
None.
Trying to make:
So far just testing VSX4 in Win 8 and looking to make standard DVD of legally acquired old B&W movie(s) or home video only.
Additional:
All my PC drivers are up to date - I check video and audio drivers regularly and run windows update often.
I have .net as standard with Windows 8 but had to install an earlier version as it was reported as required by a game (Lord of the rings online).
End:
I know I have not given precise audio and video data but this is because no matter which video I use the problem is present - I have tried many videos and audio over the last week or so.
I wonder if this is a Windows 8 Pro issue only as when I had the same PC setup with the same VSX4 and the same software previously on Windows 7, VSX4 worked a treat! That is as close to 'same' as is possible - I know Windows 8 is a bit different to Windows 7.
I am using my older version of VideoStudio because I don't like the 14 - they switched too many things around.But I am trying to pull up a project that I was working on, and nothing happens. I go File/project and click on the .VSP and nothing happens. I also tried going to the .VSP on my hard drive and selecting "open with / Video Studio" and nothing happens.
This older version and the X14 are not in the same file folder.
Yesterday I re-loaded 11.5 and it worked for a while. I exited over night.Today it stopped fetching project files and NOW, it won't re-install. The disk is configured that it will only re-install twice..
Is there a way to open a Photoshop "video" project in After Effects? I have someone painting on video but I need to tweak it in AE. I can import it but it sees just the first frame and makes it a still image for the length of the comp.
Also, I am only seeing "Photoshop Sequence" and "h.264 Quicktime" as options for video export from PS. I have all the flavors of Quicktime when rendering from AE (ProRes HQ), etc. Couldn't PS do the same?
On my current project I get the error message "Software problem" when attempting to open the project file. This problem began last night and affects the project file and all automatic backup files of my current project. It does not seem to be affecting other projects.
how to recover this file?
I just installed the Smoke software and tried to open a new project as a test file, but after i made the file and made a user i clicked the "Start" button and it just says "Unable to load video device AJA_OE2K" and makes me quit out of the application.
View 1 Replies View RelatedI was taught in school that to set up a project location, go to File > Set Project... to choose a folder for saving all files and materials, and then go to File > Project Window. But for some reason, when I click on Project Window, it does absolutely nothing. The window does not pop up.
It works fine in computers in school, but at home on my Windows computer, it doesn't.
Luckily it still hasn't happened when the save as dialog box is open, but it's rather annoying when searching for a file in the open dialog box and the search takes more than 30 seconds. Crash. Also, it seems it only happens about 90% of the time. I've updated everything + drivers are good. (I use Windows 7 Home Premium on a Asus N53SN with 16gb RAM.)
View 1 Replies View RelatedI just opened up a project (.xcf) I hadn't worked on in a couple days only to find about half of the layers missing. I have no idea what's happened to them and I'd really like to get them back.
Using GIMP 2.6.11 and Windows Vista
When I try and open an Edge Animate 2.0 project its is stable until I click on anything on the stage and then the app crashes ( edge has found an error please quit the application)
View 1 Replies View Related