I just installed the Smoke software and tried to open a new project as a test file, but after i made the file and made a user i clicked the "Start" button and it just says "Unable to load video device AJA_OE2K" and makes me quit out of the application.
View 1 Repliescan 2012 open a flame 2013 file archive
View 2 Replies View RelatedI had to uninstall Smoke earlier to attempt to get the export function working. In doing so I had to run this line of code in the terminal: sudo rm -rf /usr/discreet/
When i reinstalled and eventually got it working again Smoke didn't see the project i had spent a day working on.
Is it possible Smoke deleted my project when i ran the line of code or uninstalled?
I just spent the last couple of hours programming 28 stills with edges in CFX. I phsically clicked on save project repeatedly in those hours, especially once I hit a MAJOR milestone. I added a shadow cast node in action and my system locked up. I was forced to force quit. When I reopened my project, I found that I lost a couple of hours worth of work. In the months going on year of using this editor, I find that smoke 2013 is very well intentioned, but seriously lacking in very basic functionality. Putting out a product that is touted as a powerful editor that doesn't have a audio cross-fade node (lost in EXT version), can't add a simple outline to a clip with a button click (the reason I spent hours adding a hard shadow and changing layer priority for each of the 28 clips and finally and MOST importantly, saving EACH AND EVERY TIME the editor clicks save to completion is simply doing a diservice to a quality product. when a person clicks file-save project, the project should save fully.
View 9 Replies View RelatedI have Smoke (same version) running on two seperate Macs. Each Mac has an external thunderbolt drive for the media storage.
I worked on my project at home on Mac #1, and assumed I could bring in my external drive and use it with Mac #2.
When I try to add my drive from home to Mac #2, it creates ManagedFolder1. Which of course doesn't have my project in it- my project is on ManagedFolder0.
I suppose this may be caused by the fact I already have a ManagedFolder0 on a different external drive for this Mac, right? So I removed that drive, assuming I could then re-add the drive from home and allow access to the 2nd ManagedFolder0 with my project.
It just shows my old projects from the other drive still, but everything is broken inside of them. This makes sense as the drive is disconnected.
What's the easiest way to send a project to a collaborator outside my facility? Everything will remain in Smoke. All media files exist at both locations so we just need to be able to share the project files. Is an archive the best bet?
View 1 Replies View RelatedI did a project in SMK2013 in trial mode on an iMac. Mostly unmanaged media - links to ProRes Qts from Resolve. Sadly, I forgot to archive it before the 30 day trial expired.
I just installed 2013 on my main Mac Pro, and it's all licensed, and good to go - beware of a licensing issue with OS 10.8, by the way... (I'll write another post about that.)
I copied all of the linked source media to the new system, and using the MediaHub, I can see the projects on the iMac (even though I can't launch the app anymore), so my plan was to bring the sequences and rendered files over via Wire, then re-link to the ProRes source media on the licensed system. Easy, right?
I can copy the sequences over just fine, but in the conform tab - I can't get any of the Resolve files to relink. I've unlinked the shots, and set the file path straight to the prores media folder - the only thing different is the name of the drive it's linked to.
any column I choose to match - every file turns red. I've double checked the file names, the timecodes, etc... Everything matches up exactly, and yet it never finds a match, showing a conflict in every field I try to use as a match.
I thought i might have better luck if the media folder was imported into the project, and then manually set that folder a conform search location - but I crash every time i've tried that.
SmokeUser since 2012
MacPro w/ K3
32 GB RAM
CalDigit HdPro2 RAID
I have a project with proxy is on. In some situation i want the proxy to be off. Like for example when viewing my timeline edit. the output resolution (in viewer) is using the proxy ( lores). How can i disable this ? can i do that without turn off the proxy in project setting ? how to tell the viewer to display the hires version not the proxy?
View 1 Replies View RelatedThis is similar to something I have asked for before regarding managing media in remote/networked machines. But I can't find a way to delete media (individual clips or folders) from a nother project within my machine without switching to/loading up that project. At present in 2012 and as far back as I can remember I have had the ability to move and manage media withing other projects on the host machine as well as remote/networked machine.
Is there a button/preference I'm missing as this is integral to the workflow I use.
Is there a way to change the project name after its been created?
View 4 Replies View Relatedsome projects suddenly disappeared from the selection list that comes up when you start Smoke. The project files are still there and I didn't mess with them either. Is there any way to "refresh" the project listing?
I am working with PreRelease 4
I lost an edit I was working on and Time Machine has complete backups for the past several days. I can see and find the backup copy in Time Machine in /usr/discreet/project/ . I can extract it from Time Machine. But how can I make Smoke aware of it and open it?
I tried a few things like I have an existing project called "/usr/discreet/project/Project1", I removed it and put my backup in the same place with the same name, but that doesn't work either.
Just deleted PR4, and installed PR5.Opening an existing project takes an extremely long time (maybe 20-30 mins? guessing here)The Smoke loading screen shows something like "Connecting Control Surfaces"..
View 9 Replies View RelatedWhen setting up a new project, I'm unable to change the bit depth for the project. It's set to 8-bit and ghosted. The graphics render button has a selector but when clicked it doesn't bring up the drop down.
My guess is that it has something to do with my hardware configuration (read: I need to upgrade my GPU) .
There was a time, probably 2012 SP1, when smoke startup would take max. 30seconds.Now with 2012 SP2 after selecting a project smoke just hangs at the "Initializing shades" phase for almost 1min. making startups a major 2min.
View 9 Replies View RelatedHow to create automatically for each project, a desktop library identical with the same folders (DigitCut, Elemts, Conformation, Rushes, Audio,...), each graphic artists will be able to work with the same tree?
View 8 Replies View Relatedwhat if wanna pass/share my project file to others for them to tinker with or to continue the work,what are the files/folders that i needed to share and where can i find them?
View 4 Replies View Relatedwhen i import r3d files to a project reel, will it create a file in project or it will only take the original red file?
is there any way to do the soft import r3d files?
what is the native support means?
First: I ordered the Smoke 2013 (floating-)licence through a german reseller a week ago and I still got no answer. Is this a normal "new years eve" delay?
Second: The Smoke installation is on a computer that's OS was actually cloned from another computer. The HostName, LocalHostName and ComputerName were changed, but Backburner still insists in using the "original" name given at the OS-Installation. So if the other "clone-computer" is running, Backburner gets in trouble and is stuck on waiting. During the troubleshooting process I turned on websharing to access [URL] ..... This led to the result, that anytime i restart the machine the computername is changed to 0.0.0.0 and the backburner wount work. No way, yet, to bring this back to normal.
Third: Waiting for the smoke-licence I already begun working on the project. Now it seems that I'll have to do a clean install of the system to get it finally running. But I do not want to loose the work so far. Is there a way to bring the actual project back into an new installation of OS/Smoke without having to archive it which does not work at the moment?
I just installed my Smoke2013 SP2 yesterday, and today I want to restore my project. From Mr. Grant Kay tutorial, I saw there's restore button once he double click the restore folder. But I can't see that Restore button.
I attach the snapshot of mine.
Using Smoke EXT1 and a previous user archived his project using the old school method; media and setups seperatly instead of just selecting the project as a whole.
I've draged the media into a library and restored that easy enough but can not find the details of how to recover the setups from the tar file in the archive. It does not show up in the media pannel at all, just an emply folder. How to get these setups loaded into a project?
Is it possible to archive setups without archiving the whole project?
View 5 Replies View RelatedHow do I revert back to an older autosaved project? I can't launch my current project. I was working away, in a cfx on my timeline, smoke crashed. I tried to log back in and now it just crashed every time.
View 4 Replies View RelatedI converted a project to PR4 and opened it in PR4.
When trying to open the Connect FX editor, I get the following error on all connect FXs: "The Connect FX has lost its setup and can no longer rendered or edited."
How to correct aspect ratio when put HD shot in SD project, such as FCP 7 do that...
Screen shot attached
I'm trying unArchive a project and having difficulty linking the footage. The project opens fine, but cannot locate any of the media. The footage is in the same location as it previouly was. What am I missing?
View 3 Replies View RelatedIn our enviroment we have an imaging server that is used to deploy Mac install images. I have successfully created one for our Smoke on Mac machine.
I would like to create a junction point or relocate the /hd/var/discreet folder to another drive. It would be nice to be able to refresh this machine at moments notice. It seems that this is one of the only points that need to be kept that reside on the local HD.
I have to say that so far, after an intensive week editing a project in Smoke, things are getting quite clear, though I didn't dive deep in CFX, apart for some white balance and curves modification, so I don't have experience with any other FX feature, 3D, etc...
I like Smoke for non multi-cam work, so I think I'm going to implement it in our workflow.
And about workflow is my question: We have a video format, opening title, footage with TV bug as an overlay, music background, and ending title.
When I was working in Final Cut Pro, I could open different projects at once, so it was easy to create a template sequence in a template project, copy and paste the footage in the current project while keeping the fixed elements on the timeline.
Now, Smoke can't open more than one project at a time. I don't even know how to duplicate a project to have a template sequence to modify each time I need.
What kind of workflow required in order to reduce editing time by keeping a template that we can modify each time we need?
I downloaded a trial version and installed but some reason I can not see my "Volume" (external FW800 G-Tech Drive 7200 rpm) in order to import files into the project that I created. I'm actually running a MacBook Pro (13 inch)and the latest version of OSX. I'm salivating to try this out but I'm stuck.
View 1 Replies View RelatedI'm trying to import some clips from Avid and the clips are playing back too fast.
In Avid, the clips originated as HDV 1440x1080i 59.94 fps. I transcoded them to DVCPro 1920x1080i 59.94fps. I exported the clips from Avid using "same as source."
In Smoke, I went through the library to select and import the clips. My Smoke Cfg settings are:
30i 1280x720@5994p, project settings 1280x720.
The clips playback as if they are running at 120% (best estimate).
in the Cfg template there are settings that are similar, such as 30i 1280x720@5994p and 1280x720@5994p. Is the "30i" for interlaced footage (ie HDV and uprezed SD)?
Smoke 2012 SAP SP1
Mac 10.6.7
each time I force quit Smoke with the service monitor in a project when I open the same project after it takes several time to load the clips (EDITDESK: LOADING CLIPS). Sometimes the project just didn't open and stay on the EDITDESK: LOADING CLIPS screen.
There's something I'm doing wrong or my project is totally corrupt ?
smoke201321_smack02_app.txt smoke201321_smack02_shell.txt