some projects suddenly disappeared from the selection list that comes up when you start Smoke. The project files are still there and I didn't mess with them either. Is there any way to "refresh" the project listing?
I am working with PreRelease 4
I had to uninstall Smoke earlier to attempt to get the export function working. In doing so I had to run this line of code in the terminal: sudo rm -rf /usr/discreet/
When i reinstalled and eventually got it working again Smoke didn't see the project i had spent a day working on.
Is it possible Smoke deleted my project when i ran the line of code or uninstalled?
I just spent the last couple of hours programming 28 stills with edges in CFX. I phsically clicked on save project repeatedly in those hours, especially once I hit a MAJOR milestone. I added a shadow cast node in action and my system locked up. I was forced to force quit. When I reopened my project, I found that I lost a couple of hours worth of work. In the months going on year of using this editor, I find that smoke 2013 is very well intentioned, but seriously lacking in very basic functionality. Putting out a product that is touted as a powerful editor that doesn't have a audio cross-fade node (lost in EXT version), can't add a simple outline to a clip with a button click (the reason I spent hours adding a hard shadow and changing layer priority for each of the 28 clips and finally and MOST importantly, saving EACH AND EVERY TIME the editor clicks save to completion is simply doing a diservice to a quality product. when a person clicks file-save project, the project should save fully.
View 9 Replies View RelatedI have Smoke (same version) running on two seperate Macs. Each Mac has an external thunderbolt drive for the media storage.
I worked on my project at home on Mac #1, and assumed I could bring in my external drive and use it with Mac #2.
When I try to add my drive from home to Mac #2, it creates ManagedFolder1. Which of course doesn't have my project in it- my project is on ManagedFolder0.
I suppose this may be caused by the fact I already have a ManagedFolder0 on a different external drive for this Mac, right? So I removed that drive, assuming I could then re-add the drive from home and allow access to the 2nd ManagedFolder0 with my project.
It just shows my old projects from the other drive still, but everything is broken inside of them. This makes sense as the drive is disconnected.
What's the easiest way to send a project to a collaborator outside my facility? Everything will remain in Smoke. All media files exist at both locations so we just need to be able to share the project files. Is an archive the best bet?
View 1 Replies View RelatedI did a project in SMK2013 in trial mode on an iMac. Mostly unmanaged media - links to ProRes Qts from Resolve. Sadly, I forgot to archive it before the 30 day trial expired.
I just installed 2013 on my main Mac Pro, and it's all licensed, and good to go - beware of a licensing issue with OS 10.8, by the way... (I'll write another post about that.)
I copied all of the linked source media to the new system, and using the MediaHub, I can see the projects on the iMac (even though I can't launch the app anymore), so my plan was to bring the sequences and rendered files over via Wire, then re-link to the ProRes source media on the licensed system. Easy, right?
I can copy the sequences over just fine, but in the conform tab - I can't get any of the Resolve files to relink. I've unlinked the shots, and set the file path straight to the prores media folder - the only thing different is the name of the drive it's linked to.
any column I choose to match - every file turns red. I've double checked the file names, the timecodes, etc... Everything matches up exactly, and yet it never finds a match, showing a conflict in every field I try to use as a match.
I thought i might have better luck if the media folder was imported into the project, and then manually set that folder a conform search location - but I crash every time i've tried that.
SmokeUser since 2012
MacPro w/ K3
32 GB RAM
CalDigit HdPro2 RAID
I have a project with proxy is on. In some situation i want the proxy to be off. Like for example when viewing my timeline edit. the output resolution (in viewer) is using the proxy ( lores). How can i disable this ? can i do that without turn off the proxy in project setting ? how to tell the viewer to display the hires version not the proxy?
View 1 Replies View RelatedI just installed the Smoke software and tried to open a new project as a test file, but after i made the file and made a user i clicked the "Start" button and it just says "Unable to load video device AJA_OE2K" and makes me quit out of the application.
View 1 Replies View RelatedThis is similar to something I have asked for before regarding managing media in remote/networked machines. But I can't find a way to delete media (individual clips or folders) from a nother project within my machine without switching to/loading up that project. At present in 2012 and as far back as I can remember I have had the ability to move and manage media withing other projects on the host machine as well as remote/networked machine.
Is there a button/preference I'm missing as this is integral to the workflow I use.
Is there a way to change the project name after its been created?
View 4 Replies View RelatedI cant view my exporting job list . I want to cancel all my current export and make it fresh. My sequence is exporting again and again in same location with same file name. I need a support number in india.
View 4 Replies View RelatedI lost an edit I was working on and Time Machine has complete backups for the past several days. I can see and find the backup copy in Time Machine in /usr/discreet/project/ . I can extract it from Time Machine. But how can I make Smoke aware of it and open it?
I tried a few things like I have an existing project called "/usr/discreet/project/Project1", I removed it and put my backup in the same place with the same name, but that doesn't work either.
Just deleted PR4, and installed PR5.Opening an existing project takes an extremely long time (maybe 20-30 mins? guessing here)The Smoke loading screen shows something like "Connecting Control Surfaces"..
View 9 Replies View RelatedWhen setting up a new project, I'm unable to change the bit depth for the project. It's set to 8-bit and ghosted. The graphics render button has a selector but when clicked it doesn't bring up the drop down.
My guess is that it has something to do with my hardware configuration (read: I need to upgrade my GPU) .
There was a time, probably 2012 SP1, when smoke startup would take max. 30seconds.Now with 2012 SP2 after selecting a project smoke just hangs at the "Initializing shades" phase for almost 1min. making startups a major 2min.
View 9 Replies View RelatedHow to create automatically for each project, a desktop library identical with the same folders (DigitCut, Elemts, Conformation, Rushes, Audio,...), each graphic artists will be able to work with the same tree?
View 8 Replies View Relatedwhat if wanna pass/share my project file to others for them to tinker with or to continue the work,what are the files/folders that i needed to share and where can i find them?
View 4 Replies View Relatedwhen i import r3d files to a project reel, will it create a file in project or it will only take the original red file?
is there any way to do the soft import r3d files?
what is the native support means?
First: I ordered the Smoke 2013 (floating-)licence through a german reseller a week ago and I still got no answer. Is this a normal "new years eve" delay?
Second: The Smoke installation is on a computer that's OS was actually cloned from another computer. The HostName, LocalHostName and ComputerName were changed, but Backburner still insists in using the "original" name given at the OS-Installation. So if the other "clone-computer" is running, Backburner gets in trouble and is stuck on waiting. During the troubleshooting process I turned on websharing to access [URL] ..... This led to the result, that anytime i restart the machine the computername is changed to 0.0.0.0 and the backburner wount work. No way, yet, to bring this back to normal.
Third: Waiting for the smoke-licence I already begun working on the project. Now it seems that I'll have to do a clean install of the system to get it finally running. But I do not want to loose the work so far. Is there a way to bring the actual project back into an new installation of OS/Smoke without having to archive it which does not work at the moment?
I just installed my Smoke2013 SP2 yesterday, and today I want to restore my project. From Mr. Grant Kay tutorial, I saw there's restore button once he double click the restore folder. But I can't see that Restore button.
I attach the snapshot of mine.
Using Smoke EXT1 and a previous user archived his project using the old school method; media and setups seperatly instead of just selecting the project as a whole.
I've draged the media into a library and restored that easy enough but can not find the details of how to recover the setups from the tar file in the archive. It does not show up in the media pannel at all, just an emply folder. How to get these setups loaded into a project?
Is it possible to archive setups without archiving the whole project?
View 5 Replies View RelatedMy media hub jobs list is now always empty. If I submit a job, although the export fails. It does show up in the backburner web gui. Just not in the Smoke app.
MacBook Pro Retina
2.7GHz Intel Core i7
16GB RAM
How do I revert back to an older autosaved project? I can't launch my current project. I was working away, in a cfx on my timeline, smoke crashed. I tried to log back in and now it just crashed every time.
View 4 Replies View RelatedI converted a project to PR4 and opened it in PR4.
When trying to open the Connect FX editor, I get the following error on all connect FXs: "The Connect FX has lost its setup and can no longer rendered or edited."
How to correct aspect ratio when put HD shot in SD project, such as FCP 7 do that...
Screen shot attached
I'm trying unArchive a project and having difficulty linking the footage. The project opens fine, but cannot locate any of the media. The footage is in the same location as it previouly was. What am I missing?
View 3 Replies View RelatedIn our enviroment we have an imaging server that is used to deploy Mac install images. I have successfully created one for our Smoke on Mac machine.
I would like to create a junction point or relocate the /hd/var/discreet folder to another drive. It would be nice to be able to refresh this machine at moments notice. It seems that this is one of the only points that need to be kept that reside on the local HD.
I'm attempting to get Smoke 2012 SP1 running on Mac OS X 10.7.2. After installation, I cannot get the application to launch -- instead I get a "DlVideo Error: No video list" error and then exit.
Hardware specs are attached, in short 2 x 6 core Mac Pro, 24GB RAM, Quadro FX 4800 and Kona 3G. This is built on a clean install of 10.7.2 using the Apple video driver for the 4800. The display is an Eizo ColorEdge CG303W, attached to the 4800.
I would like to install the 4.1.28 CUDA drivers to enable the Mercury playback engine (as this machine will probably also run Premiere Pro), however I'm trying to keep it as simple as possible until I can get Smoke running.
A Euphonix MC Transport and MC Color will be added to the station, however they are not currently attached.
My workstation name is bc118-s001. I'm using an external license server (macnv3), which is running properly.
Storage is currently set to the local disk, which I know is sub-optimal. Ultimately the storage volume will be a fiber-attached TerraBlock 24D, however I'm upgrading that device from 4.6.4 to 5 before I put the unit into production, and would rather not store any data on it before the upgrade.
I've attached the application and shell logs for your reference. The following lines are only the errors from the app.log:
bc118-s001:~ itservices$ less ~/Desktop/smoke201211_bc118-s001_app.log | grep -i error
2074786144 project.C:4713 02/04/12:11:36:35.936 PRJMGT : Load Project, failed to switch to group users
2074786144 video.C:1068 02/04/12:11:36:41.379 VIDEO: non-standard monitor refresh rate (0.000000). Audio/Video playback may not be in sync.
2074786144 EuTop.C:65 02/04/12:11:36:41.467 Control Surfaces : Initialisation failed (error 46)
2074786144 error.C:332 02/04/12:11:36:42.950 ERROR: DlVideo Error: No video list
2074786144 error.C:110 02/04/12:11:36:42.950 DlVideo Error: No video list
2074786144 messageAccumulator.C:268 02/04/12:11:36:42.959 Error: DlVideo Error: No video list (Press ESC)
I notice that the monitor refresh rate is not being detected properly, however the OS seems to detect it properly.
These lines are the errors from the shell.log:
bc118-s001:~ itservices$ less ~/Desktop/smoke201211_bc118-s001_shell.log | grep -i error
Feb 04 11:36:42 : ERROR: DlVideo Error: No video list
Feb 04 11:36:42 : DlVideo Error: No video list
I have been learning smoke on various machines and different versions of the prereleases and service packs. I'm using SP2 now and II see older local projects listed in the media hub but they don't show up in the start-up screen listing of projects. how to regain access to these projects?
View 7 Replies View Relatedin media list in action module, if i add new input/media, it will add new items in the list. Now the problem is when i delete the media , there will be empty slot (slot where media has been removed) in media list. Why can't i delete this empty slot ? can i have a clean media list ?
View 6 Replies View Related
