Certainly couldn't open an X3 in X4. If I wanted to edit/burn my X4 in the "faster" X5, why should I essentially start from scratch to take advantage of X5?
Project would be SAVED as an X5 project file, of course.
I first had Windows Vista Home Premium 32-bit. Sometimes I could open a project in DVD Factory 2010. Mostly the system crashed.
Now I have Windows 7 Home Premium 64-bit. I hoped things would be better now. When I open Corel DVD factory 2010 directly and click on "Project" on the left nothing happens?
I've built a project up with several smaller project file components. It's an easier way to create a video than editing one big project.
Opening the overall project and running it on screen is not a problem. However, when I try to create a smart package of the composite project, I get a consistent error message rejecting the process because of the existence of the component vsp's.
Is there a way to avoid the error and create a smart package from a project file that has smaller component project files?
When I open my .max file I always get the Missing External Files message: glare_streaks_star_camera_filter.tif. I've already tried to re-link it but where the .tif file is and why its added to my project..
View 2 Replies View RelatedI was working on a project just fine until when I went to open it this morning. When I open it, AE crashes with either this message:
OR this message:
and finally ends with a message like this:
There are no special plugins being utilized in the project I am working in, only several Illustrator files. I'm not sure how dynamic link has anything to do with this because i'm not using it with Premiere Pro. All I know is that the project worked fine when I closed it last night, and now this is happening. It's a paid job as well, so it's very important that I can open it again.
I tried uninstalling and reinstalling CS6 and my video card drivers. Just to be clear, AE opens just fine, it's only opening this specific project that gives the crash.
Specs:
Windows 7 Ultimate (updated)
Core i7 3770k
GeForce GTX 570 1.2 gb
16 gb ram
256gb SSD
1TB media drive
Grey Screen when opening a old or new project in CS 5.1....I can then click on the outside of the screen and see the project screen but as soon as I release the mouse button it goes grey again.
View 1 Replies View RelatedOften as a sole user of Revit when I open a project I have been working on I get the following message:
"This file is already open for editing by another user. You will be unable to save any changes before that user closes the file."
Since I am the only one working on the project there are no other users and as far as I can tell no other files open. Any insight into what has triggered this message?
My project crashed. I tried reopening it, but from then I've been getting the following error messages. While restarting my system or AE usually works, this time the project wouldn't reopen no matter how I approached this.
Steps I've taken so far:
-Restarting my computer.
-Restarting After Effects
-Importing the .aep file into AfterEffects
-Opening the file on a different computer.
-Trashing preferences and reopening the Project in AfterEffects.
-Opening one of my 5 at a 15 minute interval generated Auto-save files.
All result in the same error.
see attached images to see the error I'm getting.
The final message can't be clicked away and when I click the exit button at the top right of the application the application crashes and prompts me with a default windows error screen.
Used source footage: XDCAM files in a .xmf container
Some information about my system:
______________________
After Effects CC (version 12.0) with all recent updates from the cloud as of 21th of august
Windows 7 Professional
Service Pack 1
Dell Precision T3500
Intel(R) Xeon(R) CPU W3550 @ 3.07Ghz 3.07Ghz
8 GB RAM
64-bit operating system
Wacom Intuos 4 large pen tablet
QuickTime 7.7.4
I'm trying to work on a project I created a few months ago in Edge. However, when I try to open it in Edge Animate CC, it just displays a blank screen (See image).
The timeline, the canvas, the properties, nothing seems to be populated. If I drag the time line back to 0:00, an alert pops up saying "An error occured. Please save your work and restart Edge Animate." The exported HTML file still seems to work fine though. I've tried uninstalling and reinstalling Edge, but that hasn't seemed to work.
EDIT: This seems to be an intermittant problem. Sometimes, the file displays correctly, sometimes it doesn't. If I close the program and open it again, the issue re-occurs.
Adobe Premiere CC crashes when opening a project file error 3697 have to close application with Task Manager media files open separately OK
View 1 Replies View RelatedCreated a project for a client, saved it, and rendered out a preview. Today I open the same project which has not been touched since the render and it's a completely different image result.Left is in the project as of today. Right is same frame from render yesterday. As I said, no project changes have occurred since render.
I've messed around with the blending modes and opacity settings which are still as I left them originally, keyframes and all, yet I cannot get back to the exact same image on the right. Having funky oddities in AE CC?
On my primary Workstation I´ve created a project of medium complexity (150GB, approx. 200 files, 5 sequences).Here everything is working just fine.
On my laptop I also installed Adobe CC. I copied the whole projects' folder from workstation 1 onto my external HDD and connected it to my laptop.Opening and cutting works fine here too.
Now, when I save and take the project (project file only) back to workstation 1, here Premiere Pro CC fails to load it up.The loading bar proceeds to about 75% and then freezes. If I give it some time (10-15 minutes) it finally finishes loading, but Premiere isn't showing any reaction to mouse or keyboard, there are no panels at all visible. Basically it is crashed, allthough that´s not being indicated by the task manager.
I´ve tried all the tips from in here as well as the "usual stuff": Saving a new project file, nothing.Deleting preview files, then saving a new file, nothing.Importing the project into AE and exporting a new project (on my laptop), nope.Deleting all dynamic linked comps from the old project, saving then taking it to laptop 1, opening and saving it again, taking it back to the workstation, no.Completely deleting everything Adobe on my workstation 1 and re-installing CC, "great" experience, but to no avail.I also followed the solution of the similar problem on another thread here in the forums, with unzipping the xml and deleting certain lines of code and so forth, still nothing. Then I went ahead and installed CC on my second laptop (not at all to be considered a workstation). Here the projects saved on laptop 1 opened just fine (asking for media files of course...).
EDIT:I forgot to mention that a new and blank project from the laptops opens just fine on the workstation...
So I have to consider that something's wrong with my primary workstation. Right?
It´s a fresh installation of Windows 8.1 with 24GB of Ram, GeForce GTX 570, i7 950, WD drives only, Windows on a seperate hybrid disk...All CC installations are up to date.
I can edit a video, with resynced sound/dialogue in premiere cc. When I save and close the project, everything is okay. When I later reopen the project all or most of the audio tracks are blank. They are there with the right name and length, but no waveform and no sound. I have put them in manually resynced and then on save and close: again they are gone. So there really is no point in editing if I can`t save the result. How can i restore my edits and also why do I have to do so? I have now redone every scene 5 times and I need a solution asap. Autosave keeps the same useless projects.
on Mac Pro, 10Gb Ram, premiere cc.
I tried the pluraleyes extension (as I was using pluraleyes) but this makes no difference.
I need to make a sweep along the edge of the wall opening shown in the project, but Revit does not allow me to do it.
View 9 Replies View RelatedMoved Videostudio X4 from a Win 7 machine to a new Win 8 PC.
Again it seems, audio plays fine when playing a clip from the preview window but not when playing on the timeline. (I had a similar problem with X10 and reported it in an older thread.)
Am searching now for more patches (and yes, I'm aware X6 is now the current version) but nothing obvious at the moment. Have found the SP 1/2/3 downloads on Corel's pages, but as it already upgraded to SP3 just after install, I'm guessing SP 1 and 2 are already covered..
In the past I've used a Panasonic SDR-S7 video camera which produces MPEG files with no problem.
I now have a Panasonic Lumix still camera which also takes AVCHD video. The individual files play perfectly in VS12, but as soon as I try to play the project to preview it, the picture keeps freezing. I thought this could be due to the new video's being HD but I don't think the individual files could be played either.
I have been doing this project in X5 and was putting a still picture at the end. When I review the project it stops about a second or so from the end. I thought it was the song, so I took that out.
I changed the picture, did the same thing. I lengthen the time on the picture, it will place and stop about the same time from the end. Doesn't matter how long the picture is playing. If I take the picture out, the video just before it plays fine. I put a picture back in, and it does the same thing? I thought the project time may be set someplace? Doesn't seem to matter because I change the timing on the picture at the end. Stops the same place?
I add a video to the timeline video track (not the overlay track), and with 'clip' selected and playing... I have audio just fine, for the most part... sometimes the audio jumps and skips, and sounds garbled. With 'project' selected and the video playing, either the same thing happens as the 'clip' or there is no audio at all.
What I have discovered, is that this is common with AVI files. Other files, such as WMV, don't seem to have this problem. It affects only AVI files. The video plays just fine in WMP and VLC, as well as other video editors such as PowerDirector... so why dos VideoStudio have this odd sound issue? And I'm sure as Hell not gonna convert all my videos to WMV just to edit them.
This is on a fresh install of VideoStudio Pro X4 (as well as Windows), no updates, no Service Packs, no nothing... even WITH SP1 it's still does it. I've also removed and reinstalled my codec packs (from K-Lite to Shark007) with no difference.
I've also hear that people are now having this issue with VS Pro X3 as well (I have X3 to) so I assume it's pointless to install X3 as well. I really do NOT like using any editing software other than X4, since it's the best one I've used... so I do not want a reason to use something else.
I've recently upgraded the PC and re-installed VS10 onto the new, improved, beast in front of me now, but have hit a hurdle.
Whether I'm looking at an imported project or starting a new one from scratch, I seem not to be able to get the audio tracks to play when playing the project as a whole.
I can select the music track and play it from within the timeline without a problem, but select the project and all I get is the sound of silence.
after scanning and searching the forum I can't find anything that fits my bill so far.
Drivers have been checked and updated where found wanting. I'm at a loss to explain why. I never had this problem back on the old slow-coach...!
For info I'm running Vista on a dual core 2600Ghz machine with Asus P5K Pro 'board (on-board audio) and a GeForce 8600 GTS graphics card.
I'm green with Videostudio as i use pinnacle before.
The version I use is X5, I want to make a very good quality photo album with the videostudio, I want to make the blu ray, what do I need to set before I start the project? What resolution should I set and where can I set? someone said the AVCHD is the same as bluray, I don't know!
I recently upgraded to x6. My question is, there were some hd project templates that came with x3 that id like to use with x6. How to do this, or import or find the files?
View 5 Replies View RelatedI want to burn my project I have created on VSX4 to a DVD. I don't want to create a menu or add chapters or anything else, I just want to burn my project to the DVD. I have followed the instructions in the user guide to bring my project in to be burnt, but the next button remains greyed out so I can't go to the next step to enable it to be burnt.
View 5 Replies View RelatedI finished the DVD, looks great, now I want to make another DVD the next day. How do I recover the project? In VSX3 made it really easly to recover DVD projects with all the menus, chapters and any other setting. Where does VSX4 save the finish project at?
View 2 Replies View RelatedI have VideoStudio X4 pro, think the sales man did a great job as i'm a beginner and man o man this isn't what i thought it woud be I'm trying to save my pictures to cd, it burns in and when i go to play it on the video, it won't work, just comes up black? Have slected create disk image, have used the cd-r before to do a similar thing and it won't work.
View 3 Replies View RelatedAudio in clips (video or audio) plays but will not play in project preview or in created video files or DVDs.
Devices:
No special devices just the normal PC setup (using 3 monitors).
Video Studio version:
VSX4 Pro: SP1, SP2 and SP3 added with nothing else added (templates etc).
Source files:
Codecs Note:
I first tried VSX4 with only the codecs on the PC from a new install - that is a total wipe of the two SSD drives in the PC and a reinstall from 'clean' of Windows 8 Pro on the 'c:' main SSD and a new install of VSX4.
The PC then had adobe flash player added - mainly just for 'YouTube', 'DivX' and 'Xilisoft - Video Convertor Platinum' - a package I have used extensively before and along sided VSX4 without issue.
When I found that the audio issue continued I installed the latest available 'K-Lite' package via 'CNet - Downloads'. Throwing codecs at the problem is not necessarily I have used 'K-Lite' on and off for years though and have had no issues from 'K-Lite' (with VSX4).
Regarding .avi:
I am told there are some 800 plus known versions of files that have the .avi extension and this is problematic. However, I have tried many files and converted some to the somewhat 'standard' DivX, Xvid or H.264/MPEG 4 and had no luck thus far!
Have tried various source files from various sources. Have mostly tried .avi (DivX /Xvid) files but have also tried mpeg and mpeg 2. Have tried converting files from one type to other also.
I use the audio as it is per file and have tried splitting the audio and saving it as a .wav directly from VSX4 then using that .wav as a voice or music track. Split audio works in independent player (Windows Media Player) and plays directly in VSX4 as a clip but not when playing the project.
Project Properties:
PAL (25 fps)
MPEG files
24 bits, 720 x 576, 25 fps
Upper Field First
(DVD-PAL), 16:9
I have not deliberately set any of the properties manually and they seem correct for my usage.
PAL or NTSC:
In the UK using Pal.
Error Codes:
None.
Trying to make:
So far just testing VSX4 in Win 8 and looking to make standard DVD of legally acquired old B&W movie(s) or home video only.
Additional:
All my PC drivers are up to date - I check video and audio drivers regularly and run windows update often.
I have .net as standard with Windows 8 but had to install an earlier version as it was reported as required by a game (Lord of the rings online).
End:
I know I have not given precise audio and video data but this is because no matter which video I use the problem is present - I have tried many videos and audio over the last week or so.
I wonder if this is a Windows 8 Pro issue only as when I had the same PC setup with the same VSX4 and the same software previously on Windows 7, VSX4 worked a treat! That is as close to 'same' as is possible - I know Windows 8 is a bit different to Windows 7.
I started a VSX5 project that my friend wanted to piggyback on with his VSX4 software . He tells me that VSX4 opens but nothing seems to happen afterwards. Does it mean that VSX4 is incompatible with VSX5 .vsp file projects ?
View 2 Replies View RelatedI am using my older version of VideoStudio because I don't like the 14 - they switched too many things around.But I am trying to pull up a project that I was working on, and nothing happens. I go File/project and click on the .VSP and nothing happens. I also tried going to the .VSP on my hard drive and selecting "open with / Video Studio" and nothing happens.
This older version and the X14 are not in the same file folder.
Yesterday I re-loaded 11.5 and it worked for a while. I exited over night.Today it stopped fetching project files and NOW, it won't re-install. The disk is configured that it will only re-install twice..
My project is 11-minutes long. There is a lag of around 10-seconds when I am on the timeline and hit <space> or press [>] on the preview control. It wasn't like this when I started the project earlier today.
What can I do to get rid of this lag?
I have in my project a lot of video clip that I did a slip of the audio track.
If I need to delete one clip, by example in the middle of the project, the audio track corresponding is not deleted...and if I delete it manually, all the other audio track at right do not move to the left...so the audio track and the video clip are not sync anymore.
How can I correctly delete a part of my project?
When I try to open a vsp project in X5 using Windows 7 I am getting an error message saying, File is already in use, and a number 15055:1:1. I have been using this computer with X5 and XP professional and it works fine. I have a selection of vsp files that I use as templates, the only time I have had this message before is when I had my template vsp files write protected, which I have stopped doing. I have now installed Windows 7 on this same computer but cant open any of my previous projects. These projects were created using X5.
View 3 Replies View RelatedI am playing a section of a project in Timeline view. The section is marked by the Trim Markers. Starts fine but then pauses/stops when it reaches the end of the accompanying music (an mp3) rather than at the second Trim Marker. Theses two points are different because the video fades to black as the music finishes. The video should continue to run for 2 or 3 seconds more with a black screen.
I've noticed that if I select the Sound Mixer and then play the section between the Trim Markers it works fine i.e. plays up to the second Trim Marker.
Also, it seems that if I create a video of the selected part of the project this works fine too.
I just seem to be getting the problem in Timeline view when I have black video that runs after an mp3. I have checked multiple projects where I have the same effect (fade to black as music ends) and I am getting exactly the same problem. As the sound stops, so does the playback.
Background is that I am new to X3 and struggling. I had problems authoring in X3 so used X2,. Then had a problem with X2 so re-installed. Then found this problem when editing again in X3 so reinstalled X3!