Premiere Pro :: Get Blank Audio Tracks On Opening A Project
Dec 10, 2013
I can edit a video, with resynced sound/dialogue in premiere cc. When I save and close the project, everything is okay. When I later reopen the project all or most of the audio tracks are blank. They are there with the right name and length, but no waveform and no sound. I have put them in manually resynced and then on save and close: again they are gone. So there really is no point in editing if I can`t save the result. How can i restore my edits and also why do I have to do so? I have now redone every scene 5 times and I need a solution asap. Autosave keeps the same useless projects.
on Mac Pro, 10Gb Ram, premiere cc.
I tried the pluraleyes extension (as I was using pluraleyes) but this makes no difference.
View 5 Replies
ADVERTISEMENT
Jan 27, 2014
So the option to add Adding Video/Audio Tracks to Timeline are "grey'd out" and what's even more strange is that they don't even have the one or two tracks that are usually in the timeline when you open new project.
View 14 Replies
View Related
Feb 28, 2014
I'm having trouble figuring out how to edit multiple audio tracks. I put the clip on the timeline and I can hear both tracks but there is only one audio track showing. How do I seperate the tracks?
One track is from a rhodes external mic with phantom power using XLR. The other is from a powered lavalier mic attached by XLR. Is there something I have to do in project set up?
View 5 Replies
View Related
Dec 16, 2010
I would like to add a music file on one track, sound effects like bells, dramatic drums on another. Is this something that I can do with VSP x3? If so where can I find out how it is done? If not is there a way for me to say put special sound effects in back of the main music clip in different places in the timeline?
View 5 Replies
View Related
Jan 14, 2014
I recently started to work with the Adobe suit so i am not yet used to the workflow. We are serval people working on the post production of a short movie filmed with a red SCARLET in raw which means that the files are pretty big. The audio where captured in serval tracks who all have been merged with the video clips. The clips have thereafter been cut and placed in its right place. So now it is my job to work with the sound design. I have tryd to export the audio in both AAF and OMF and every time i open it up in Audition it sais that the media is offline. On my computer all i have is the orgininal Audio files. Is there anyway to get only the audio (all the tracks) to Audition, without having them searching for the merged files. For example creating new Audio from the cutted tracks?
View 1 Replies
View Related
Mar 21, 2014
We are recording in two languages, one in left and the other in right channel. However, in Adobe Premiere Pro we are not able to split the track when we take up for rought cut. Both the tracks are found mixed. Since we need to maintian the split track to dubb into other languages.
View 2 Replies
View Related
Feb 2, 2014
In Adobe Prem Pro, I'm finishing a short film. All, of a sudden I am bringing over one last clip, and I can't get an audio track. So, if I select a clip and drag it over, only the video shows up.
View 5 Replies
View Related
Jan 22, 2014
My video clip, brought over into Premiere CS6 from Final Cut Pro 5, has the usual left and right audio tracks, but in Premiere they are not linked into a stereo pair. Thus the volume level has to be adjusted separately in each track.
In Final Cut, I can quickly convert two independent audio tracks into a stero pair by selecting the tracks and then going to the menu Modify > Stereo Pair. I can't figure out how to do this in Premiere.
When two audio tracks are not linked, the volume level has to be adjusted separately in each track, which wastes time. But after two tracks are linked into a Stereo Pair in Final Cut, adjusting either track adjusts them both, together. That's what I want to do now in Premiere.
So, how do I make two separate audio tracks into a linked Stereo Pair in Premiere?
View 14 Replies
View Related
Nov 28, 2013
I am new to working with bigger projects in Premiere, I moved from FCP last year. I am currently editing a show which is based of Line recorded cameras.
I have 6 Tracks of video, plus mulitple audio tracks and 2 hrs long
My problem. Having made and lifted my selects in the timeline I now am finding the timeline to be very unresponsive to the point of pinwheeling even just to open the sequence. I can't zoom, move or edit anything in this timeline without a pinwheel and a 30 second delay. None of my other sequences are having this issue. All are the same codec.
Is there a way to set up larger sequences so that this does not happen? I find premiere 7.1 is fine until I build bigger sequences/projects. My inital thought was drive speed, however the issues only arose when I had lifted all the selects.
Could it be that I have too many tracks of video for premiere to handle? I have no problem playing the timeline (although it will initally pinwheel) its mainly navigation/clip selction along the timeline which causes an issue
I tried multicam also but that had too many issues
I work on a 2012 Mac Pro 2.4 Ghz 12-cores with 12 GB ram 9 of which is allocated to premiere. I also have my working caches on a dedicated single 3.5" 7200 rpm drive 1gb graphics card.
View 1 Replies
View Related
Nov 25, 2013
I'm trying to work on a project I created a few months ago in Edge. However, when I try to open it in Edge Animate CC, it just displays a blank screen (See image).
The timeline, the canvas, the properties, nothing seems to be populated. If I drag the time line back to 0:00, an alert pops up saying "An error occured. Please save your work and restart Edge Animate." The exported HTML file still seems to work fine though. I've tried uninstalling and reinstalling Edge, but that hasn't seemed to work.
EDIT: This seems to be an intermittant problem. Sometimes, the file displays correctly, sometimes it doesn't. If I close the program and open it again, the issue re-occurs.
View 28 Replies
View Related
Dec 27, 2013
Adobe Premiere CC crashes when opening a project file error 3697 have to close application with Task Manager media files open separately OK
View 1 Replies
View Related
Mar 1, 2014
On my primary Workstation I´ve created a project of medium complexity (150GB, approx. 200 files, 5 sequences).Here everything is working just fine.
On my laptop I also installed Adobe CC. I copied the whole projects' folder from workstation 1 onto my external HDD and connected it to my laptop.Opening and cutting works fine here too.
Now, when I save and take the project (project file only) back to workstation 1, here Premiere Pro CC fails to load it up.The loading bar proceeds to about 75% and then freezes. If I give it some time (10-15 minutes) it finally finishes loading, but Premiere isn't showing any reaction to mouse or keyboard, there are no panels at all visible. Basically it is crashed, allthough that´s not being indicated by the task manager.
I´ve tried all the tips from in here as well as the "usual stuff": Saving a new project file, nothing.Deleting preview files, then saving a new file, nothing.Importing the project into AE and exporting a new project (on my laptop), nope.Deleting all dynamic linked comps from the old project, saving then taking it to laptop 1, opening and saving it again, taking it back to the workstation, no.Completely deleting everything Adobe on my workstation 1 and re-installing CC, "great" experience, but to no avail.I also followed the solution of the similar problem on another thread here in the forums, with unzipping the xml and deleting certain lines of code and so forth, still nothing. Then I went ahead and installed CC on my second laptop (not at all to be considered a workstation). Here the projects saved on laptop 1 opened just fine (asking for media files of course...).
EDIT:I forgot to mention that a new and blank project from the laptops opens just fine on the workstation...
So I have to consider that something's wrong with my primary workstation. Right?
It´s a fresh installation of Windows 8.1 with 24GB of Ram, GeForce GTX 570, i7 950, WD drives only, Windows on a seperate hybrid disk...All CC installations are up to date.
View 3 Replies
View Related
Nov 29, 2012
I am wondering if there is another method to control volume levels on the audio and voice over tracks. I am thinking particularly about a method to easily (automatically) reduce the volume of the background music when a voiceover starts and raising it again after the voiceover is finished.
I find the existing process of capturing a volume node fiddly and, for me, a bit hit and miss.
View 11 Replies
View Related
May 1, 2011
Is there a way to add an additional audio track to either the music track or voice tracks? In other words, instead of one voice track and one music track is there a way to add a third track? I have many sound effects and music and there are parts of my project that need more than two audio tracks.
View 3 Replies
View Related
Jan 11, 2011
I have been using VS since version 9 and I seem to get the same thing on each version. After I have completed the project and burn to DVD the audio track seems too loud. I don't seem to notice it playing back the file (computer speakers aren't much chop) but once in the DVD player you always have to quickly turn down the volume once it starts playing. There is no static or distortion its just too loud. I now go into every song I input on the audo track and lower the levels. And it only appears to be the music. Audio in the video clips comes out at normal levels and does not need adjusting. If anything I have to boost the video clip audio because it's too low. The songs I import are directly from CD's or MP3's from my music folder.
Its not a real problem as I can fix by constantly lowering each song but is there a way to set the preference to lower the output on the audio tracks? That is to see the level automatically set below the 0 line when music is added. Or is it something in the burn proceedure in MF7?
View 2 Replies
View Related
Dec 27, 2012
I am editing in the timeline in Smoke 2013. I bring in a music track onto track 4. I bring in a interview clip on track 1. Only one or the other will playback and not together at the same time. I also notice on the audio tracks patch area a small square that when you place the cursor over and drag left or right I assume channels are being selected. What is this square box for and how do I get all my audio tracks to playback together?
I am using Panasonic P2 footage at 1920 x 1080. 29.97 NDF. I have brought them in through the media hub and created folders that correspond to each P2 card I stored on my Video Array. I am using a ProAvio Video Box with a RocketRAID 644 controller. What gives? Why am I not able to hear all the audio tracks during playback?
View 1 Replies
View Related
Nov 14, 2013
How do I add multiple audio tracks to a slideshow in Lightroom 5
View 1 Replies
View Related
Mar 3, 2012
Using Pro X4
I have a video file, I have an audio file. Video is loaded in the video track, audio in the Voice track.
HOW in the ... do I sync them? I have the mixer on, I can see the wav graphics, I can see where I want them to line up but either the Video track must slide forward ( and it won't, it's locked on 0 ) or the audio track must slide backward (but it won't slide below 0 start) I've tried splitting, clipping... I can't get it cut just right. All I want is time frame 0 for the video to start at positive time frame within the audio.
View 2 Replies
View Related
Mar 4, 2014
Any way of locking all the audio tracks at once. I am using Smoke 2013 on Mac with Smoke Classic Keys Set up, I can lock all the video tracks at once by shift-clicking on the Lock icon of any video track, the same doesn't seem to apply to audio track...
View 9 Replies
View Related
May 4, 2013
How can I disable, when using of multiple audio tracks, one or more audio tracks?
I use a audio recorder for the sound, so I want to disable the soundtracks of all other cameras.
The settings of the audio mixer are not saved. I am using Premier Elements 11.
View 2 Replies
View Related
Dec 24, 2013
Have reinstalled Premiere Pro 6.0.5 because I cannot drag Audio Transitions or Effects to any Timeline sequences in my Projects. Have tried modifier keys, but to no avail.
View 1 Replies
View Related
Mar 21, 2012
I just downloaded the trial version of this software (Video Studio X5 Pro) to try it before I buy it. I am importing RAW and AVI footage capture from a program called DXtory. I am recording those videos with three audio tracks, one track covers the sound of the video game being played, one track covers my microphone input, and the last track covers the sound that comes through my teamspeak server.
When I import a video into Corel am I able to separately edit each audio track? IE change the volume of one input but not the other?
View 3 Replies
View Related
Apr 19, 2011
In Smoke 2012 attempting to select two audio tracks for merging and/or splitting results in the message "two layers must be fully selected". I have the two layers are selected in the far left-hand-side of the timeline with the selection buttons. The manual is not specific either.
Conversely, selecting a stereo audio track and applying stereo 'stereo split' results in the message "At least one stereo track needs to be selected". Selection was performed, as above, with the far left-hand-side track selection box.
The point is that creating a 'new sequence' results in a single video track. When two mono audio tracks are created to accomodate the audio portion of the clips they have to be converted to stereo.
View 2 Replies
View Related
Mar 29, 2014
I'm trying to get back into making youtube videos and I am running into an issue. I have an Hauppauge HD PVR 2 gaming edition. Now one of the features that makes it easier for commentators like me is the ability to have all of the audio channels [game, mic, PC (aka skype chat)] all on seperate "layers" that way you can go into your video/audio editor and have the different audios so you can tweak them individually.
The problem that I have and wondering about is this, is there a way to import the files and have the different audio tracks be seperate? The files that they come in are either .ts [raw] or .mp4 [in program compression]. I would like to keep it in .ts even though its a bigger file as I like my compression style after I've edited that gives the best look without loss when uploading to youtube.
I have see the free program at any-video-converter.com mentioned, but the issue is last time I used it I somehow ended up with a virus. I also have handbrake, the Master collection cs 5.5, and VLC.
Operating System: Windows 7
Software Version: 10.5.0.253
Device: HD PVR 2 gaming edition
View 4 Replies
View Related
Jul 31, 2013
I'm trying to get my source audio to patch to tracks 3 and 4 in my record timeline. It looks like I should be able to drag on the source clips patch to change it from A1.L and A1.R to A2.L/A2.R.
View 5 Replies
View Related
Apr 17, 2014
OK, I love the new method of scrolling to expand tracks in PP CC. I only see the bottom half of my audio. Is there a way to have the old view?
View 4 Replies
View Related
Mar 1, 2014
I can see the chosen video on the right side but I cannot see the previews of the other tracks or switch from one to the other. This project was working just fine and I didn't change any settings when it decided not to work. I just hopped over to make some adjustments to another timeline and then when I jumped back over to the master with the multicam nested inside it decided to stop giving me previews and prevents me from switching camera angles.
This shows my multicam monitor:
And this shows the timeline that contains all the tracks for the multicam:
I have multicam editing enabled on the multicam sequence with the above tracks nested inside.
View 3 Replies
View Related
Sep 17, 2013
I love CC's multicam feature, but keep having this problem:
In Pluraleyes, I would lay all my Cam 1 material on video track 1 (multiple clips), then Cam 2 on video track 2 (multiple clips), add my audio, and create a multicam track that kept all Cam 1 clips on track 1 and all Cam 2 clips on track 2.
in Premiere Pro CC, multicam creation can only be exectued via the browser, not the timeline. So Premiere syncs everything up and throws each clip onto the next video track up, leaving you with a mountain of timeline media that reads out tiny and jumps all over the place when viewed in the multicam monitor (see picture).
What I'm after:
- the ability to create multicam sequences based on the timeline (lay out all clips from each cam on whichever video track I want, select all, then choose "create multicam sequence") so that the end result isn't 20 video tracks I have to manually collapse into 2 (time waster).
View 6 Replies
View Related
Jan 13, 2014
I want to take a sequence that I had in an old project and put it into a current project, but I dont want it to be one rendered file... i still want too see the fades and make changes to it...
View 5 Replies
View Related
Sep 8, 2007
My video material holds two voices that were recorded on CH1 and CH2 in mono, resulting in a stereo clip that has one voice on the left channel and one voice on the right channel. So far I always duplicated the audio clips and use fill right and fill left. I just found out about channel mappings in CS2 and CS3, but for my actual project it is too late since it is cut already. It is my first project I'm doing in CS2 and after it is finished I will install CS3. So my first question is: When I use the channel mapping command, how are the resulting mono channels handled in the master? Will each mono channel fill the right AND the left channel of the stereo master track?
With delight I found out that the channel mixer in CS2 allows to use fill right and fill left effects, so I don't have to drag the effects on each clip separatley.
My second question is regarding the mixing of the two voices. Since we couldn't afford to have a professional sound engenieer at the shoot the channel of the voice that was not talking wasn't turned down, so the second voice will be heard on the other channel when the two people stood close together. Is there a more efficient way to mix the two voices instead of using rubber bands to bring down one voice when it is not talking? It's a hell lot of work.
View 6 Replies
View Related
Jan 2, 2014
i´m having a problem opening a premiere pro cs6 project from another computer. My partner can open the project in her computer, but when she sends me the project by mail and i try to open it in my computer i I get t the mesasage " Cannot load project". I´ve tried importing the project into another project but it doesn´t work.
View 2 Replies
View Related
