AutoDesk Smoke :: Selecting / Splitting / Merging Audio Tracks?

Apr 19, 2011

In Smoke 2012 attempting to select two audio tracks for merging and/or splitting results in the message "two layers must be fully selected". I have the two layers are selected in the far left-hand-side of the timeline with the selection buttons. The manual is not specific either.

Conversely, selecting a stereo audio track and applying stereo 'stereo split' results in the message "At least one stereo track needs to be selected". Selection was performed, as above, with the far left-hand-side track selection box.

The point is that creating a 'new sequence' results in a single video track. When two mono audio tracks are created to accomodate the audio portion of the clips they have to be converted to stereo.

View 2 Replies


ADVERTISEMENT

AutoDesk Smoke :: How To Get All Audio Tracks To Playback Together

Dec 27, 2012

I am editing in the timeline in Smoke 2013. I bring in a music track onto track 4. I bring in a interview clip on track 1. Only one or the other will playback and not together at the same time. I also notice on the audio tracks patch area a small square that when you place the cursor over and drag left or right I assume channels are being selected. What is this square box for and how do I get all my audio tracks to playback together?

I am using Panasonic P2 footage at 1920 x 1080. 29.97 NDF. I have brought them in through the media hub and created folders that correspond to each P2 card I stored on my Video Array. I am using a ProAvio Video Box with a RocketRAID 644 controller. What gives? Why am I not able to hear all the audio tracks during playback?

View 1 Replies View Related

AutoDesk Smoke :: Shortcut For Locking All Audio Tracks At Once?

Mar 4, 2014

Any way of locking all the audio tracks at once. I am using Smoke 2013 on Mac with Smoke Classic Keys Set up, I can lock all the video tracks at once by shift-clicking on the Lock icon of any video track, the same doesn't seem to apply to audio track...

View 9 Replies View Related

AutoDesk Smoke :: Get Source Audio To Patch To Tracks 3 And 4 In Record Timeline

Jul 31, 2013

I'm trying to get my source audio to patch to tracks 3 and 4 in my record timeline. It looks like I should be able to drag on the source clips patch to change it from A1.L and A1.R to A2.L/A2.R.

View 5 Replies View Related

AutoDesk Smoke :: Mixdown Of 5.1 Dts Tracks?

Nov 3, 2011

how can I mixdown 5.1 dts Audio tracks to stereo in smoke.

View 1 Replies View Related

AutoDesk Smoke :: How To Insert A Gap In All Tracks At Once

Feb 21, 2013

i have an edit. I got about 5 layers (text , mograph etc). Now if i go to the middle of my edit and i want just to insert a gap at my current position so it will push away any clips at any track to the right side away from my positioner. So i want to make a room to add more clip in the middle of my edit and i want it to ripple all clips in all tracks. I found that i can ripple only in current track.

I will normally select all clips located in the right side of my positioner (all track). then drag them to make a space (gap).

View 9 Replies View Related

AutoDesk Smoke :: Hidden Tracks Appear In Export

Dec 20, 2013

Turned off tracks will NOT be ignored when exporting. This is a trap!

View 1 Replies View Related

AutoDesk Smoke :: Moving Clips Between Tracks?

Aug 1, 2013

Is there an equivalent command to the FCP alt up/down arrow to move a clip up and down between tracks? I can drag but it doesn't snap to the anything ie where the clip originally was on another track.

View 3 Replies View Related

AutoDesk Smoke :: Why Can't See Video On Lower Tracks

Nov 8, 2013

I've got an issue seeing video on video track 1 when I have something on a track above it.  I have video on track 1, and above that I have a gap with a text fx placed on it (it's a lower third name key).  The track indicator is located on the track with the text fx (see the attached "timeline" shot), yet all I see is that key without seeing the video below it (see attached "canvas")  Everything has been rendered, so I don't understand what's wrong.  And when I export the timeline, the black remains.

View 6 Replies View Related

AutoDesk Smoke :: Edit Keyframe Using Tracks (or Dopesheet)?

Nov 27, 2012

In tracks editor, if let say i have 5 keyframes then i select 3 of them in the middle , then how to do the X-scale ? Among the available operation, i can't find scaling.

View 5 Replies View Related

AutoDesk Smoke :: No Audio Of WAV Files?

Aug 6, 2013

I imported 24-bit, 48 khz audio-mono .wav-files and dont get an output of them. The Audio from the camera files are no problem. The debug mode shows me that I dont have audio dropframes.

View 7 Replies View Related

AutoDesk Smoke :: Import Audio File

Apr 13, 2011

I´ve a problem when import all types of audio file, the application crash...but is curios that if I export the file that crash the application (in Lost and found) to the desktop and try import this audio there aren´t problem..import ok...and if this audio is edited with a image and import with import media tool (audio and video) import ok.

Another question about import / export...when a tried export a quick time in the column of status of background tasks appear the message that my "host" does not seem to exist, and not process the quicktime move.

View 9 Replies View Related

AutoDesk Smoke :: How To Get Audio Playback In CFX And Action

Apr 2, 2013

How to get audio playback in CFX and Action?

I have the Main Audio loaded the Timebar but can hear anything when I press play.

I'm needing to sync animations to places in the audio but Smoke 2013 can't seem to do it.

View 6 Replies View Related

AutoDesk Smoke :: Audio (WAV) Files Empty

May 30, 2012

I have a bunch of audio files. They are all wave files, but Smoke says they are empty....(but they aren't)

Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)

View 9 Replies View Related

AutoDesk Smoke :: Audio Sample Rate

Oct 17, 2011

I am trying to convince Smoke to import audio @48kHz. I have a new project within Smoke reading the input sample rate from my AJA card at 48K. The file that I am importing is 48K and it plays at 48K from the Mac desktop. When I import the file into smoke it sample rate converts it to 44.1 KHz.: Option_click on the file in the Smoke desktop confirms this. All hardware input and output sample rates are set to 48K. Is there a setting that I am missing in Smoke?

The default sound for my Mac is set to the AJA card and no other audio software is running.

View 5 Replies View Related

AutoDesk Smoke :: Cannot Put Cut On Stereo Audio Track

Oct 26, 2012

Merged two mono tracks into a stereo one, then highlighted the clip and tried to cut the clip using ctrl-V - all that happens is the track becomes unhighlighted.

If i use shift Ctrl-V, then the track does get cut but so does every other track!

I checked the keyboard shortcuts and i'm pressing the right keys, just not seeing anything happen...

I'm using the PR5 version on OSX10.7.3

View 1 Replies View Related

AutoDesk Smoke :: Match Frame With Audio

Nov 15, 2012

I use pr5. I got a clip (.mov with audio) and imported the clip and enable the cache source media so it will be transcoded into stone. Now after i edit the clip into the timeline , i want to reveal the master clip. so i select the clip and the audio as well (sync) and try to do match frame (F key). I got new clip reveal in my desktop but only the video, it got no audio. How to get the audio back from the original source ? why the match-frame is ignoring the audio ? so far i have to do silly steps by re edit the source clip back to the timeline to pair back with the audio. is this a bug ?

View 2 Replies View Related

AutoDesk Smoke :: Audio Distorted At Export?

Aug 13, 2013

When exporting a sequence I'm having problems with my audio being distorted, like it was peaking. Audio in the timeline sounds good, I did have some gain adjustments on some clips which I removed to see if that was the issue and the same problem is happening. No other effects other than some reverb are present.
 
Faders were normalised and audio peaked at -1dB only for a few seconds, the normal audio levels are about what is shown in the screenshot, around -6 to -5 dB.
 
This was exporting via the iPod preset with not further adjustments. 

MacBook Pro Retina 15" - OS X 10.8.4 - 4TB G-tech G-Raid - Smoke 2013
MacPro 5,1 - OSX 10.8.5 - 64GB Ram - 12TB Pegasus RAID - 24 inch HP DreamColor - Smoke 2013 - Maya 2013

View 1 Replies View Related

AutoDesk Smoke :: Reverse Audio Clip

Dec 7, 2012

I need my audio to reverse with my video clip, doesn't seem like Smoke wants to do that or am I missing something?

View 4 Replies View Related

AutoDesk Smoke :: Audio Starts Too Early?

Nov 4, 2011

I have a timeline where the actual movie and music start at 10:00:00:00. Before that, I have a black chart with names on it. There is no audio underneath. But when I export a quicktime file, it pulled the music up front to the first frame of my chart (therefore, the music is too short now and out of sync...) Why is smoke doing that and how can I get Smoke to output the qt correctly?

Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)

View 1 Replies View Related

AutoDesk Smoke :: How To Keep Sync With Clips That Have Audio

Apr 30, 2013

How is the best way to keep sync with clips that have audio. In Premiere for example, when a clip contains audio it handles both video and audio as a single thing until I explicitly unlink them. But in Smoke, even with the option Select linked, which as far as I can tell it only works for selecting and activate that little arrow (do not remember the name of the function) in the tracks table, keeps all ok but only on that track.

This is the normal operation of Smoke? He really will always treat the audio and video of same clip as separate things? Am I missing something? Because at least for me, that's came from Premiere, always be remembering to set all the tracks and always go to the menu and select Enable linked is what most complicates the editorial work in Smoke.

View 6 Replies View Related

AutoDesk Smoke :: Select Audio Only In Linked Selection

Jun 27, 2012

How do I dynamically select within a link selection instead of turning it on and of every-time I want to select audio only for deletion.

View 5 Replies View Related

AutoDesk Smoke :: File Export - New Audio Settings

Jul 17, 2012

I'm working on Smoke 2013 on LINUX. There are new Options to export a File with Audio. Where can I read what each option is doing, because we had some mistakes on some Files because of the Audio.

How I can check my export setting.

View 1 Replies View Related

AutoDesk Smoke :: Losing Audio Playback Every Few Minute

Aug 5, 2011

Every minute or so, I loose audio on playback (timeline or sources). The only thing that seems to fix the issue is cycling between AES BNC (or XLR) to Embedded and back, and the audio will playback fine again . . . for a few minutes, and then I need to recycle it again. I've restarted Smoke, restarted the computer, and down a full shut down and restarted . . . and the issue continues.

View 9 Replies View Related

AutoDesk Smoke :: Import 8 Channels Of Audio - Only First 6 Come In Correctly

Sep 27, 2013

Using Extension 1, I am importing an RGB Uncompressed clip with 8 channels of audio with 7&8 a stereo pair.  Only the first 6 come in correctly, the 7th channel has no audio and is not marked as a stereo channel.  The 8th channel is not shown at all.  
 
I tested the same clip in Flame 2012 and all 8 channels import correctly.

View 1 Replies View Related

AutoDesk Smoke :: Quicktime Imports Won't Play Audio

Feb 26, 2014

Every Quicktime I import and cache into my project won't play audio, even though the audio tracks show up in the timeline with waveforms and the seqeunce specs match that of the source audio.  Apparently Flame users are having similar problems.  I'm having to strip out the audio into AIF for separate import and re-sync.

Oddly enough, I can hear the audio prior to import when playing the preview clip in Media Hub.

View 5 Replies View Related

AutoDesk Smoke :: Imported AAF - Audio Separate From Video

Jun 21, 2012

I imported an AAF from Premiere Pro and the media came in separately from the video. So I have a video clip and a separate audio clip instead of the two together. Is this because I chose "Save Sources Separately"?

View 6 Replies View Related

AutoDesk Smoke :: Audio / Video Keyword Mismatch?

Jul 16, 2013

I am currently trying to set my audio to coreaudio line out, and video to my kona.
 
I quit smoke, changed to coreaudio in the smoke setup, hit apply, and then quit the app. when I restart smoke it tells me that it is disabling the audio output due to an audio / video mismatch.
 
Below I have three screen shots. The error message, my system sound panel, and the smoke setup window. Why I am geting this error?
 
I'm running 10.8.4 with a kona 3g, and smoke 2013 ext1

View 2 Replies View Related

AutoDesk Smoke :: Why Doesn't Selecting Clips In Timing View

Jan 15, 2013

Why doesn't Selecting clips in the "Timing" view in CFX reveal which clip it is the Schematic? I realize there is a very small corresponding number, but a nice yellow surround would be nice.

View 4 Replies View Related

Lightroom :: 4.3 - Splitting And Merging Catalogs

Jan 13, 2013

My main catalog (LR4.3) has grown quite big containing about 122000 pictures, mostly RAW and the lrcat -file is 2.24Gb. In the beginning of this year I decided to start a new catalog, year 2013, a "working catalog" and when this year's works are done, I'll merge it to the main catalog and start a new catalog for year 2014, and so on.

It's just that I'm a little concerned about how well LR behaves in this kind of fusion. I mean all metadata transfer, especially the keywords.
 
The reason for this operation was that the big catalog is quite slow to use.  This new and this far tiny catalog though behaves almost lightning fast.

View 2 Replies View Related

AutoDesk Smoke :: Audio Effects On Right Side Of Standard Player?

Jun 15, 2012

Yesterday while playing with Smoke 2013 I activated the audio desk whiles in the standard player. It showed up as expected on the left side of the player BUT the Audio FX desk we used to see in the classic interface showed up on the right side of the player. That was awesome but today I activated the audio desk and only the mixer on the left showed up.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved