Every minute or so, I loose audio on playback (timeline or sources). The only thing that seems to fix the issue is cycling between AES BNC (or XLR) to Embedded and back, and the audio will playback fine again . . . for a few minutes, and then I need to recycle it again. I've restarted Smoke, restarted the computer, and down a full shut down and restarted . . . and the issue continues.
View 9 RepliesHow to get audio playback in CFX and Action?
I have the Main Audio loaded the Timebar but can hear anything when I press play.
I'm needing to sync animations to places in the audio but Smoke 2013 can't seem to do it.
I am editing in the timeline in Smoke 2013. I bring in a music track onto track 4. I bring in a interview clip on track 1. Only one or the other will playback and not together at the same time. I also notice on the audio tracks patch area a small square that when you place the cursor over and drag left or right I assume channels are being selected. What is this square box for and how do I get all my audio tracks to playback together?
I am using Panasonic P2 footage at 1920 x 1080. 29.97 NDF. I have brought them in through the media hub and created folders that correspond to each P2 card I stored on my Video Array. I am using a ProAvio Video Box with a RocketRAID 644 controller. What gives? Why am I not able to hear all the audio tracks during playback?
I have just tried plugging a Samsung SSD capable of 400+MB/s into a thunderbolt caddy. In action and on the desktop it behaves as normal. But in the player it plays at about 100fps. how to get it to play at speed.
The project config is HD 25 psf free. Smoke SAP2 SP2ssd_storageplaybackspeedissue.mov
[URL]
both playback and GUI use the GPU? I wonder if it would be possible to able to change GUI setup while playback. For example. I would like to play the sequence for my client (on the client monitor) while changeling the UI to the 1up view (alt-1) and zooming out the timeline. Basicly, i would like to maintain UI interactivity while Smoke continues to play. Currently this stops playback.
Another example would be; I would like to hit play as soon as the client asks but then still be able to resize my viewer or turn on the PPM meters without having to stop.
MacBook Pro Retina
2.7GHz Intel Core i7
16GB RAM
How can I change the playback and still player resolution for my timeline or for a clip?
I would like to be able to switch between full-resolution, 1/2, 1/4, 1/8, 1/16ths etc... (with one setting for playback and another, separate setting for still image/paused frames) e.g. via a right click on a clip/player.
PS Just like in Redcine-X or Adobe Premiere or AE...
When i scrub playback control in the cfx , it's slower compare to if i scrub the same thing (same viewport layout) inside the timing editor timeline. In timing editor the scrubbing response is a lot smoother even when we're looking at the same objects on the viewer. The playback control need to be fixed.
View 2 Replies View RelatedI've cut a 23.98 1080HD teaser via imported R3D source. Brought the source in at half res, so a little bigger than 1080HD however have been processing re-sizes in SoftFX.
The program plays perfectly fine in smoke, but I'm getting stuttering playback anytime I export a Quicktime. It's a constant, intermittent stutter every second or so.
In the desktop i can playback the thumbnail (space bar key), the problem is i will play the thumbnail under my current cursor position NOT the SELECTED thumbnail ? is there any preference i can set to switch this behavior?
Let say i'm hovering a thumbnail (clip) , i can play it by pressing space bar directly , but what if i want to scrub it first coz i don't want it to play from the beginning. While doing the scrubbing , my cursor will definitely then out of thumbnail. it might accidentally hovering (on top of) other clip/thumbnail. now pressing space bar will definitely play the wrong clip. so every time i scrub the clip, i got to reposition the cursor on top of the clip over and over again.
So i think it's more useful to change the behavior.
I have a clip that play perfectly fine in my timeline. When I export it, either as a Quicktime or image sequence, the playback stutters every few seconds; basically it double prints a frame every few seconds or something. It's extremely annoying and preventing me from a client delivery in the morning.
View 3 Replies View RelatedThe GUI and broadcast monitors in all 3 of our Smokes (Mac) are out of sync by 2 frames.
I know there is a Audio offset, but that will always throw one of the monitors out.
Is there a playback delay or offset that can be used to sync bother the UI monitor and the Broadcast Monitor?
Currently having to use the shortcut Shift+B+F13 to switch between Sync to Hi-Res and Sync to Broadcast depending on the situation.
I'm trying to import some clips from Avid and the clips are playing back too fast.
In Avid, the clips originated as HDV 1440x1080i 59.94 fps. I transcoded them to DVCPro 1920x1080i 59.94fps. I exported the clips from Avid using "same as source."
In Smoke, I went through the library to select and import the clips. My Smoke Cfg settings are:
30i 1280x720@5994p, project settings 1280x720.
The clips playback as if they are running at 120% (best estimate).
in the Cfg template there are settings that are similar, such as 30i 1280x720@5994p and 1280x720@5994p. Is the "30i" for interlaced footage (ie HDV and uprezed SD)?
Smoke 2012 SAP SP1
Mac 10.6.7
I imported 24-bit, 48 khz audio-mono .wav-files and dont get an output of them. The Audio from the camera files are no problem. The debug mode shows me that I dont have audio dropframes.
View 7 Replies View RelatedI´ve a problem when import all types of audio file, the application crash...but is curios that if I export the file that crash the application (in Lost and found) to the desktop and try import this audio there aren´t problem..import ok...and if this audio is edited with a image and import with import media tool (audio and video) import ok.
Another question about import / export...when a tried export a quick time in the column of status of background tasks appear the message that my "host" does not seem to exist, and not process the quicktime move.
I have a bunch of audio files. They are all wave files, but Smoke says they are empty....(but they aren't)
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
I am trying to convince Smoke to import audio @48kHz. I have a new project within Smoke reading the input sample rate from my AJA card at 48K. The file that I am importing is 48K and it plays at 48K from the Mac desktop. When I import the file into smoke it sample rate converts it to 44.1 KHz.: Option_click on the file in the Smoke desktop confirms this. All hardware input and output sample rates are set to 48K. Is there a setting that I am missing in Smoke?
The default sound for my Mac is set to the AJA card and no other audio software is running.
Merged two mono tracks into a stereo one, then highlighted the clip and tried to cut the clip using ctrl-V - all that happens is the track becomes unhighlighted.
If i use shift Ctrl-V, then the track does get cut but so does every other track!
I checked the keyboard shortcuts and i'm pressing the right keys, just not seeing anything happen...
I'm using the PR5 version on OSX10.7.3
I use pr5. I got a clip (.mov with audio) and imported the clip and enable the cache source media so it will be transcoded into stone. Now after i edit the clip into the timeline , i want to reveal the master clip. so i select the clip and the audio as well (sync) and try to do match frame (F key). I got new clip reveal in my desktop but only the video, it got no audio. How to get the audio back from the original source ? why the match-frame is ignoring the audio ? so far i have to do silly steps by re edit the source clip back to the timeline to pair back with the audio. is this a bug ?
View 2 Replies View RelatedWhen exporting a sequence I'm having problems with my audio being distorted, like it was peaking. Audio in the timeline sounds good, I did have some gain adjustments on some clips which I removed to see if that was the issue and the same problem is happening. No other effects other than some reverb are present.
Faders were normalised and audio peaked at -1dB only for a few seconds, the normal audio levels are about what is shown in the screenshot, around -6 to -5 dB.
This was exporting via the iPod preset with not further adjustments.
MacBook Pro Retina 15" - OS X 10.8.4 - 4TB G-tech G-Raid - Smoke 2013
MacPro 5,1 - OSX 10.8.5 - 64GB Ram - 12TB Pegasus RAID - 24 inch HP DreamColor - Smoke 2013 - Maya 2013
I need my audio to reverse with my video clip, doesn't seem like Smoke wants to do that or am I missing something?
View 4 Replies View RelatedI have a timeline where the actual movie and music start at 10:00:00:00. Before that, I have a black chart with names on it. There is no audio underneath. But when I export a quicktime file, it pulled the music up front to the first frame of my chart (therefore, the music is too short now and out of sync...) Why is smoke doing that and how can I get Smoke to output the qt correctly?
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
How is the best way to keep sync with clips that have audio. In Premiere for example, when a clip contains audio it handles both video and audio as a single thing until I explicitly unlink them. But in Smoke, even with the option Select linked, which as far as I can tell it only works for selecting and activate that little arrow (do not remember the name of the function) in the tracks table, keeps all ok but only on that track.
This is the normal operation of Smoke? He really will always treat the audio and video of same clip as separate things? Am I missing something? Because at least for me, that's came from Premiere, always be remembering to set all the tracks and always go to the menu and select Enable linked is what most complicates the editorial work in Smoke.
How do I dynamically select within a link selection instead of turning it on and of every-time I want to select audio only for deletion.
View 5 Replies View RelatedI'm working on Smoke 2013 on LINUX. There are new Options to export a File with Audio. Where can I read what each option is doing, because we had some mistakes on some Files because of the Audio.
How I can check my export setting.
Any way of locking all the audio tracks at once. I am using Smoke 2013 on Mac with Smoke Classic Keys Set up, I can lock all the video tracks at once by shift-clicking on the Lock icon of any video track, the same doesn't seem to apply to audio track...
View 9 Replies View RelatedUsing Extension 1, I am importing an RGB Uncompressed clip with 8 channels of audio with 7&8 a stereo pair. Only the first 6 come in correctly, the 7th channel has no audio and is not marked as a stereo channel. The 8th channel is not shown at all.
I tested the same clip in Flame 2012 and all 8 channels import correctly.
Every Quicktime I import and cache into my project won't play audio, even though the audio tracks show up in the timeline with waveforms and the seqeunce specs match that of the source audio. Apparently Flame users are having similar problems. I'm having to strip out the audio into AIF for separate import and re-sync.
Oddly enough, I can hear the audio prior to import when playing the preview clip in Media Hub.
I imported an AAF from Premiere Pro and the media came in separately from the video. So I have a video clip and a separate audio clip instead of the two together. Is this because I chose "Save Sources Separately"?
View 6 Replies View RelatedI am currently trying to set my audio to coreaudio line out, and video to my kona.
I quit smoke, changed to coreaudio in the smoke setup, hit apply, and then quit the app. when I restart smoke it tells me that it is disabling the audio output due to an audio / video mismatch.
Below I have three screen shots. The error message, my system sound panel, and the smoke setup window. Why I am geting this error?
I'm running 10.8.4 with a kona 3g, and smoke 2013 ext1
Yesterday while playing with Smoke 2013 I activated the audio desk whiles in the standard player. It showed up as expected on the left side of the player BUT the Audio FX desk we used to see in the classic interface showed up on the right side of the player. That was awesome but today I activated the audio desk and only the mixer on the left showed up.
View 4 Replies View RelatedAny way to scrub the audio in the timeline using the arrow keys or the sequence positioner? Also, with "Snap" on, is it possible to have the positioner snap to a marker in the timeline?
View 2 Replies View Related