I imported an AAF from Premiere Pro and the media came in separately from the video. So I have a video clip and a separate audio clip instead of the two together. Is this because I chose "Save Sources Separately"?
View 6 Replies
When I import an audio file into Smoke it ends up being longer, and plays slower than it does outside of Smoke.
The file is a stereo mp3, 16 bit, 44kHz
Its normal duration is 13:19
In Smoke it shows up as 13:30
I tried applying a Time Warp to speed it back up but I can't apply the speed change. It is reset back to 100% after trying to change it.
Even if I don't import the file, in the MediaHub, in preview mode it shows up with a duration of 13:30 and plays slowly.
The project has a 24P frame rate in case that has any influence.
I am currently trying to set my audio to coreaudio line out, and video to my kona.
I quit smoke, changed to coreaudio in the smoke setup, hit apply, and then quit the app. when I restart smoke it tells me that it is disabling the audio output due to an audio / video mismatch.
Below I have three screen shots. The error message, my system sound panel, and the smoke setup window. Why I am geting this error?
I'm running 10.8.4 with a kona 3g, and smoke 2013 ext1
New update seems to have caused any QT with audio and video to be locked together....ie if I lift the video, it'll lift the audio, or if I apply an effect to audio, the video becomes unrendered, where previously it wasn't. Used to be able to modify or edit without V&A locked together.....
smoke2014advsp2
Any tips for synching audio with on-camera reference mic? Also, once synched in timeline, is it possible to merge audio with video and create a clip that can be organized in media hub/bins?
View 2 Replies View RelatedIs it possible to nudge a video segment or audio clip in timeline with a short cut key?In FCP7 I used this all the time.
View 4 Replies View RelatedIs there any way to apply auto safe white/black point limiter to video and the same with audio?
View 2 Replies View RelatedI am newer to using Adobe CS 6, but I am having a problem I have never had before. When I play the video I edited in adobe timeline everything is perfect. But when I export the video, the video and audio export in different files. The video has no audio, and the audio has no video.
View 6 Replies View RelatedI just bought VideoStudio Pro x6 from Amazon last night and got to tinkering around with it. I have a MP4 video that I imported in and half way through previewing it, the audio drops. The original plays all the audio fine, but VideoStudio just can't get past a certain point with the audio.
I copied this from my system info. Not sure what's needed:
I am on Windows 7 Ultimate 64 bit (6.1 Build 7601)
Processor i7 CPU 920 @ 2.67GHz
Memory: 6144MB RAM
DirextX 11
Audio sync problem I'm experiencing with videos recorded with the latest iPad 3 (well, that's what I'm calling it anyway).
I believe the iPad 3 recording format is 1080/30p with 44.1Khz / 16 bit audio, but when I match those settings on a Premiere Pro CS5.5 project (or try 48KHz audio as a test), the audio gradually goes out of sync. If the video is several minutes long, it becomes quite obvious, and by 10 minutes, it's terrible!
I should add the file plays back fine on the iPad itself and was imported to a Mac via iTunes. It also plays fine on the Mac itself in Quicktime.
On a related note, I additionally captured the audio using a Zoom H2n which i intended to replace in Premiere, but foolishly I captured it at 48KHz, rather than the 44.1KHz of the iPad video file. Should I resample it?
I actually managed to line-up the 48 and 44.1KHz waveforms from the iPad and Zoom in Premiere quite accurately, but again both gradually go out of sync with the video...
I'm running Premiere Pro 5.5.2 on Mac OSX 10.7.3.
I am looking for a way to easily view the separate rgb channels as grey values for key pulling on each channel. Also, I am looking for a way to change the viewer gamma value without changing the fx value.
View 4 Replies View RelatedI was trying to find in the documentation a section about importing media and replacing media. I work at a VFX facility where we mostly work with EXR sequences and getting our footage as RED files.
So in an ideal world we would do the conform in Smoke and push out EXR files for the vfx/nuke/maya guys. And then be given back a EXR sequence with the timecode still intact.And in an ideal world, we would not get new EDL's from the offline facility in the middle of the project.
All of the above is a urban myth, the ideal world doesn't exist.And now for some questions from a not-so-ideal-world-situation.
1.) So how would you in Smoke2013 go about and compare EDL's so that you don't need to conform things that you already have?
2.) What if a clip is just 15 frames longer in the new EDL, would it be possible to extend a already existing clip?
3.) EXR's has lost their timecode, but we know with clip it is, how do we replace the clip? And would it be possible to "tag it" with a new timecode.
I have a huge series of PNG images (name 1, name 2 ...) and I want to import them individually not as a sequence. I also like to set them to a specific length, if possible.
View 3 Replies View RelatedI imported 24-bit, 48 khz audio-mono .wav-files and dont get an output of them. The Audio from the camera files are no problem. The debug mode shows me that I dont have audio dropframes.
View 7 Replies View RelatedI've imported a PSD to animate in action. I need the grey blade area to be transparent and show the background image. As I change the transparency in the Axis node, the grey area gets darker and lighter in color but does not show the background image through.
View 2 Replies View RelatedI´ve a problem when import all types of audio file, the application crash...but is curios that if I export the file that crash the application (in Lost and found) to the desktop and try import this audio there aren´t problem..import ok...and if this audio is edited with a image and import with import media tool (audio and video) import ok.
Another question about import / export...when a tried export a quick time in the column of status of background tasks appear the message that my "host" does not seem to exist, and not process the quicktime move.
How to get audio playback in CFX and Action?
I have the Main Audio loaded the Timebar but can hear anything when I press play.
I'm needing to sync animations to places in the audio but Smoke 2013 can't seem to do it.
I have a bunch of audio files. They are all wave files, but Smoke says they are empty....(but they aren't)
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
I am trying to convince Smoke to import audio @48kHz. I have a new project within Smoke reading the input sample rate from my AJA card at 48K. The file that I am importing is 48K and it plays at 48K from the Mac desktop. When I import the file into smoke it sample rate converts it to 44.1 KHz.: Option_click on the file in the Smoke desktop confirms this. All hardware input and output sample rates are set to 48K. Is there a setting that I am missing in Smoke?
The default sound for my Mac is set to the AJA card and no other audio software is running.
Merged two mono tracks into a stereo one, then highlighted the clip and tried to cut the clip using ctrl-V - all that happens is the track becomes unhighlighted.
If i use shift Ctrl-V, then the track does get cut but so does every other track!
I checked the keyboard shortcuts and i'm pressing the right keys, just not seeing anything happen...
I'm using the PR5 version on OSX10.7.3
I use pr5. I got a clip (.mov with audio) and imported the clip and enable the cache source media so it will be transcoded into stone. Now after i edit the clip into the timeline , i want to reveal the master clip. so i select the clip and the audio as well (sync) and try to do match frame (F key). I got new clip reveal in my desktop but only the video, it got no audio. How to get the audio back from the original source ? why the match-frame is ignoring the audio ? so far i have to do silly steps by re edit the source clip back to the timeline to pair back with the audio. is this a bug ?
View 2 Replies View RelatedWhen exporting a sequence I'm having problems with my audio being distorted, like it was peaking. Audio in the timeline sounds good, I did have some gain adjustments on some clips which I removed to see if that was the issue and the same problem is happening. No other effects other than some reverb are present.
Faders were normalised and audio peaked at -1dB only for a few seconds, the normal audio levels are about what is shown in the screenshot, around -6 to -5 dB.
This was exporting via the iPod preset with not further adjustments.
MacBook Pro Retina 15" - OS X 10.8.4 - 4TB G-tech G-Raid - Smoke 2013
MacPro 5,1 - OSX 10.8.5 - 64GB Ram - 12TB Pegasus RAID - 24 inch HP DreamColor - Smoke 2013 - Maya 2013
I need my audio to reverse with my video clip, doesn't seem like Smoke wants to do that or am I missing something?
View 4 Replies View RelatedI have a timeline where the actual movie and music start at 10:00:00:00. Before that, I have a black chart with names on it. There is no audio underneath. But when I export a quicktime file, it pulled the music up front to the first frame of my chart (therefore, the music is too short now and out of sync...) Why is smoke doing that and how can I get Smoke to output the qt correctly?
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
I am editing in the timeline in Smoke 2013. I bring in a music track onto track 4. I bring in a interview clip on track 1. Only one or the other will playback and not together at the same time. I also notice on the audio tracks patch area a small square that when you place the cursor over and drag left or right I assume channels are being selected. What is this square box for and how do I get all my audio tracks to playback together?
I am using Panasonic P2 footage at 1920 x 1080. 29.97 NDF. I have brought them in through the media hub and created folders that correspond to each P2 card I stored on my Video Array. I am using a ProAvio Video Box with a RocketRAID 644 controller. What gives? Why am I not able to hear all the audio tracks during playback?
How is the best way to keep sync with clips that have audio. In Premiere for example, when a clip contains audio it handles both video and audio as a single thing until I explicitly unlink them. But in Smoke, even with the option Select linked, which as far as I can tell it only works for selecting and activate that little arrow (do not remember the name of the function) in the tracks table, keeps all ok but only on that track.
This is the normal operation of Smoke? He really will always treat the audio and video of same clip as separate things? Am I missing something? Because at least for me, that's came from Premiere, always be remembering to set all the tracks and always go to the menu and select Enable linked is what most complicates the editorial work in Smoke.
How do I dynamically select within a link selection instead of turning it on and of every-time I want to select audio only for deletion.
View 5 Replies View RelatedI'm working on Smoke 2013 on LINUX. There are new Options to export a File with Audio. Where can I read what each option is doing, because we had some mistakes on some Files because of the Audio.
How I can check my export setting.
Every minute or so, I loose audio on playback (timeline or sources). The only thing that seems to fix the issue is cycling between AES BNC (or XLR) to Embedded and back, and the audio will playback fine again . . . for a few minutes, and then I need to recycle it again. I've restarted Smoke, restarted the computer, and down a full shut down and restarted . . . and the issue continues.
View 9 Replies View RelatedAny way of locking all the audio tracks at once. I am using Smoke 2013 on Mac with Smoke Classic Keys Set up, I can lock all the video tracks at once by shift-clicking on the Lock icon of any video track, the same doesn't seem to apply to audio track...
View 9 Replies View RelatedUsing Extension 1, I am importing an RGB Uncompressed clip with 8 channels of audio with 7&8 a stereo pair. Only the first 6 come in correctly, the 7th channel has no audio and is not marked as a stereo channel. The 8th channel is not shown at all.
I tested the same clip in Flame 2012 and all 8 channels import correctly.
