Merged two mono tracks into a stereo one, then highlighted the clip and tried to cut the clip using ctrl-V - all that happens is the track becomes unhighlighted.
If i use shift Ctrl-V, then the track does get cut but so does every other track!
I checked the keyboard shortcuts and i'm pressing the right keys, just not seeing anything happen...
I'm using the PR5 version on OSX10.7.3
I have seen a number people new to smoke get confused when trying to edit mono audio source to a stereo track only to find the audio doesn't doesn't appear.
How about a preference that automatically splits the mono audio so that it edits to the stereo track?
If it was on by default it would definitely be of less confusion to new users
Or perhaps a dialogue box explaining why the edit did not work due to the differing audio properties.
Great work with getting smoke to where it is!
When I import an audio file into Smoke it ends up being longer, and plays slower than it does outside of Smoke.
The file is a stereo mp3, 16 bit, 44kHz
Its normal duration is 13:19
In Smoke it shows up as 13:30
I tried applying a Time Warp to speed it back up but I can't apply the speed change. It is reset back to 100% after trying to change it.
Even if I don't import the file, in the MediaHub, in preview mode it shows up with a duration of 13:30 and plays slowly.
The project has a 24P frame rate in case that has any influence.
I am using VSX3 and have a question about whether it is possible to mix/edit the audio track for the MTS files added to the project when the audio is 2ch stereo?
Basically what I want to know is how to remove or lessen voices that are close to the camera's mic, when I am really interested in keeping the audio of the subject I am focused/zoomed in on?
Case in point, my wife was filming my son's pre-k moving up ceremony and we have some priceless video of him singing up on the stage. But a portion of the soundtrack is ruined by her yelling at my mother-in-law that she is holding the point-n-shoot camera upside down and the ensuing conversation. In this case, editing the clip or adding music and fading out the clip audio won't cut it.
Or can I? "Link" is greyed out
View 8 Replies View RelatedCan Smoke on Mac 2012 sp2 output dual stream stereo to HDCam SR?
View 5 Replies View Relatedhow to track a bicubic or extended bicubic ? i found no track button like i have in bilinear mode. I want to do 4 point track and also want to bend/warp the edges.
View 1 Replies View RelatedIs there any short cut for moving the clip from one track to other(above or below track)?
like we have in FCP.
Is there any shortcut key or provision for disabling the view of an individual clip on the video track, like in FCP CNTRL + B is used.
View 1 Replies View RelatedWhat would be the short cut key for creating a gap effect of the clip on the track below?
View 4 Replies View RelatedI imported 24-bit, 48 khz audio-mono .wav-files and dont get an output of them. The Audio from the camera files are no problem. The debug mode shows me that I dont have audio dropframes.
View 7 Replies View RelatedI´ve a problem when import all types of audio file, the application crash...but is curios that if I export the file that crash the application (in Lost and found) to the desktop and try import this audio there aren´t problem..import ok...and if this audio is edited with a image and import with import media tool (audio and video) import ok.
Another question about import / export...when a tried export a quick time in the column of status of background tasks appear the message that my "host" does not seem to exist, and not process the quicktime move.
How to get audio playback in CFX and Action?
I have the Main Audio loaded the Timebar but can hear anything when I press play.
I'm needing to sync animations to places in the audio but Smoke 2013 can't seem to do it.
I have a bunch of audio files. They are all wave files, but Smoke says they are empty....(but they aren't)
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
I am trying to convince Smoke to import audio @48kHz. I have a new project within Smoke reading the input sample rate from my AJA card at 48K. The file that I am importing is 48K and it plays at 48K from the Mac desktop. When I import the file into smoke it sample rate converts it to 44.1 KHz.: Option_click on the file in the Smoke desktop confirms this. All hardware input and output sample rates are set to 48K. Is there a setting that I am missing in Smoke?
The default sound for my Mac is set to the AJA card and no other audio software is running.
I use pr5. I got a clip (.mov with audio) and imported the clip and enable the cache source media so it will be transcoded into stone. Now after i edit the clip into the timeline , i want to reveal the master clip. so i select the clip and the audio as well (sync) and try to do match frame (F key). I got new clip reveal in my desktop but only the video, it got no audio. How to get the audio back from the original source ? why the match-frame is ignoring the audio ? so far i have to do silly steps by re edit the source clip back to the timeline to pair back with the audio. is this a bug ?
View 2 Replies View RelatedWhen exporting a sequence I'm having problems with my audio being distorted, like it was peaking. Audio in the timeline sounds good, I did have some gain adjustments on some clips which I removed to see if that was the issue and the same problem is happening. No other effects other than some reverb are present.
Faders were normalised and audio peaked at -1dB only for a few seconds, the normal audio levels are about what is shown in the screenshot, around -6 to -5 dB.
This was exporting via the iPod preset with not further adjustments.
MacBook Pro Retina 15" - OS X 10.8.4 - 4TB G-tech G-Raid - Smoke 2013
MacPro 5,1 - OSX 10.8.5 - 64GB Ram - 12TB Pegasus RAID - 24 inch HP DreamColor - Smoke 2013 - Maya 2013
I need my audio to reverse with my video clip, doesn't seem like Smoke wants to do that or am I missing something?
View 4 Replies View RelatedI have a timeline where the actual movie and music start at 10:00:00:00. Before that, I have a black chart with names on it. There is no audio underneath. But when I export a quicktime file, it pulled the music up front to the first frame of my chart (therefore, the music is too short now and out of sync...) Why is smoke doing that and how can I get Smoke to output the qt correctly?
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
I am editing in the timeline in Smoke 2013. I bring in a music track onto track 4. I bring in a interview clip on track 1. Only one or the other will playback and not together at the same time. I also notice on the audio tracks patch area a small square that when you place the cursor over and drag left or right I assume channels are being selected. What is this square box for and how do I get all my audio tracks to playback together?
I am using Panasonic P2 footage at 1920 x 1080. 29.97 NDF. I have brought them in through the media hub and created folders that correspond to each P2 card I stored on my Video Array. I am using a ProAvio Video Box with a RocketRAID 644 controller. What gives? Why am I not able to hear all the audio tracks during playback?
How is the best way to keep sync with clips that have audio. In Premiere for example, when a clip contains audio it handles both video and audio as a single thing until I explicitly unlink them. But in Smoke, even with the option Select linked, which as far as I can tell it only works for selecting and activate that little arrow (do not remember the name of the function) in the tracks table, keeps all ok but only on that track.
This is the normal operation of Smoke? He really will always treat the audio and video of same clip as separate things? Am I missing something? Because at least for me, that's came from Premiere, always be remembering to set all the tracks and always go to the menu and select Enable linked is what most complicates the editorial work in Smoke.
I see that you can split the audio from the video. Can you do the reverse and link the audio back into the video say after you split, cut and mute an off camera scream? It would just make it easier to add clips before the edited one, although it's not all that hard to sync things up.
View 2 Replies View RelatedHow do I dynamically select within a link selection instead of turning it on and of every-time I want to select audio only for deletion.
View 5 Replies View RelatedI'm working on Smoke 2013 on LINUX. There are new Options to export a File with Audio. Where can I read what each option is doing, because we had some mistakes on some Files because of the Audio.
How I can check my export setting.
Every minute or so, I loose audio on playback (timeline or sources). The only thing that seems to fix the issue is cycling between AES BNC (or XLR) to Embedded and back, and the audio will playback fine again . . . for a few minutes, and then I need to recycle it again. I've restarted Smoke, restarted the computer, and down a full shut down and restarted . . . and the issue continues.
View 9 Replies View RelatedAny way of locking all the audio tracks at once. I am using Smoke 2013 on Mac with Smoke Classic Keys Set up, I can lock all the video tracks at once by shift-clicking on the Lock icon of any video track, the same doesn't seem to apply to audio track...
View 9 Replies View RelatedUsing Extension 1, I am importing an RGB Uncompressed clip with 8 channels of audio with 7&8 a stereo pair. Only the first 6 come in correctly, the 7th channel has no audio and is not marked as a stereo channel. The 8th channel is not shown at all.
I tested the same clip in Flame 2012 and all 8 channels import correctly.
Every Quicktime I import and cache into my project won't play audio, even though the audio tracks show up in the timeline with waveforms and the seqeunce specs match that of the source audio. Apparently Flame users are having similar problems. I'm having to strip out the audio into AIF for separate import and re-sync.
Oddly enough, I can hear the audio prior to import when playing the preview clip in Media Hub.
I imported an AAF from Premiere Pro and the media came in separately from the video. So I have a video clip and a separate audio clip instead of the two together. Is this because I chose "Save Sources Separately"?
View 6 Replies View RelatedI am currently trying to set my audio to coreaudio line out, and video to my kona.
I quit smoke, changed to coreaudio in the smoke setup, hit apply, and then quit the app. when I restart smoke it tells me that it is disabling the audio output due to an audio / video mismatch.
Below I have three screen shots. The error message, my system sound panel, and the smoke setup window. Why I am geting this error?
I'm running 10.8.4 with a kona 3g, and smoke 2013 ext1
Yesterday while playing with Smoke 2013 I activated the audio desk whiles in the standard player. It showed up as expected on the left side of the player BUT the Audio FX desk we used to see in the classic interface showed up on the right side of the player. That was awesome but today I activated the audio desk and only the mixer on the left showed up.
View 4 Replies View Related