How to get audio playback in CFX and Action?
I have the Main Audio loaded the Timebar but can hear anything when I press play.
I'm needing to sync animations to places in the audio but Smoke 2013 can't seem to do it.
I am editing in the timeline in Smoke 2013. I bring in a music track onto track 4. I bring in a interview clip on track 1. Only one or the other will playback and not together at the same time. I also notice on the audio tracks patch area a small square that when you place the cursor over and drag left or right I assume channels are being selected. What is this square box for and how do I get all my audio tracks to playback together?
I am using Panasonic P2 footage at 1920 x 1080. 29.97 NDF. I have brought them in through the media hub and created folders that correspond to each P2 card I stored on my Video Array. I am using a ProAvio Video Box with a RocketRAID 644 controller. What gives? Why am I not able to hear all the audio tracks during playback?
Every minute or so, I loose audio on playback (timeline or sources). The only thing that seems to fix the issue is cycling between AES BNC (or XLR) to Embedded and back, and the audio will playback fine again . . . for a few minutes, and then I need to recycle it again. I've restarted Smoke, restarted the computer, and down a full shut down and restarted . . . and the issue continues.
View 9 Replies View RelatedI have just tried plugging a Samsung SSD capable of 400+MB/s into a thunderbolt caddy. In action and on the desktop it behaves as normal. But in the player it plays at about 100fps. how to get it to play at speed.
The project config is HD 25 psf free. Smoke SAP2 SP2ssd_storageplaybackspeedissue.mov
[URL]
both playback and GUI use the GPU? I wonder if it would be possible to able to change GUI setup while playback. For example. I would like to play the sequence for my client (on the client monitor) while changeling the UI to the 1up view (alt-1) and zooming out the timeline. Basicly, i would like to maintain UI interactivity while Smoke continues to play. Currently this stops playback.
Another example would be; I would like to hit play as soon as the client asks but then still be able to resize my viewer or turn on the PPM meters without having to stop.
MacBook Pro Retina
2.7GHz Intel Core i7
16GB RAM
How can I change the playback and still player resolution for my timeline or for a clip?
I would like to be able to switch between full-resolution, 1/2, 1/4, 1/8, 1/16ths etc... (with one setting for playback and another, separate setting for still image/paused frames) e.g. via a right click on a clip/player.
PS Just like in Redcine-X or Adobe Premiere or AE...
When i scrub playback control in the cfx , it's slower compare to if i scrub the same thing (same viewport layout) inside the timing editor timeline. In timing editor the scrubbing response is a lot smoother even when we're looking at the same objects on the viewer. The playback control need to be fixed.
View 2 Replies View RelatedI've cut a 23.98 1080HD teaser via imported R3D source. Brought the source in at half res, so a little bigger than 1080HD however have been processing re-sizes in SoftFX.
The program plays perfectly fine in smoke, but I'm getting stuttering playback anytime I export a Quicktime. It's a constant, intermittent stutter every second or so.
In the desktop i can playback the thumbnail (space bar key), the problem is i will play the thumbnail under my current cursor position NOT the SELECTED thumbnail ? is there any preference i can set to switch this behavior?
Let say i'm hovering a thumbnail (clip) , i can play it by pressing space bar directly , but what if i want to scrub it first coz i don't want it to play from the beginning. While doing the scrubbing , my cursor will definitely then out of thumbnail. it might accidentally hovering (on top of) other clip/thumbnail. now pressing space bar will definitely play the wrong clip. so every time i scrub the clip, i got to reposition the cursor on top of the clip over and over again.
So i think it's more useful to change the behavior.
I have a clip that play perfectly fine in my timeline. When I export it, either as a Quicktime or image sequence, the playback stutters every few seconds; basically it double prints a frame every few seconds or something. It's extremely annoying and preventing me from a client delivery in the morning.
View 3 Replies View RelatedThe GUI and broadcast monitors in all 3 of our Smokes (Mac) are out of sync by 2 frames.
I know there is a Audio offset, but that will always throw one of the monitors out.
Is there a playback delay or offset that can be used to sync bother the UI monitor and the Broadcast Monitor?
Currently having to use the shortcut Shift+B+F13 to switch between Sync to Hi-Res and Sync to Broadcast depending on the situation.
I'm trying to import some clips from Avid and the clips are playing back too fast.
In Avid, the clips originated as HDV 1440x1080i 59.94 fps. I transcoded them to DVCPro 1920x1080i 59.94fps. I exported the clips from Avid using "same as source."
In Smoke, I went through the library to select and import the clips. My Smoke Cfg settings are:
30i 1280x720@5994p, project settings 1280x720.
The clips playback as if they are running at 120% (best estimate).
in the Cfg template there are settings that are similar, such as 30i 1280x720@5994p and 1280x720@5994p. Is the "30i" for interlaced footage (ie HDV and uprezed SD)?
Smoke 2012 SAP SP1
Mac 10.6.7
I imported 24-bit, 48 khz audio-mono .wav-files and dont get an output of them. The Audio from the camera files are no problem. The debug mode shows me that I dont have audio dropframes.
View 7 Replies View RelatedI created a comp with 30 image planes and an animated camera. Now we want to work with the result in Fusion so I need an FBX. Is there a way to output it directly from action? And how can I export the camera with the animation?
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
I created a 3D text and a 3D path. Now I simply want the text to follow the path (the text should always look at me, so I can read it). But as soon as I connect the path to my axis of my text, the letters are being pushed together. No matter what path settings I try (Look at... etc) the letters don't extend back to their original "position"
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
I have a 10 sec clip that I want to track. It's a girl driving on her bike a long a street. The camera is always parallel to her, so that the scene behind her keeps on changing. How can I track such a shot? I know, that if I want to track something going off screen, I have to jump to the last frame and adjust the tracker, but this clip is just too long, to just place the tracker at the very last frame (almost randomly).
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
I´ve a problem when import all types of audio file, the application crash...but is curios that if I export the file that crash the application (in Lost and found) to the desktop and try import this audio there aren´t problem..import ok...and if this audio is edited with a image and import with import media tool (audio and video) import ok.
Another question about import / export...when a tried export a quick time in the column of status of background tasks appear the message that my "host" does not seem to exist, and not process the quicktime move.
I have a bunch of audio files. They are all wave files, but Smoke says they are empty....(but they aren't)
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
I am trying to convince Smoke to import audio @48kHz. I have a new project within Smoke reading the input sample rate from my AJA card at 48K. The file that I am importing is 48K and it plays at 48K from the Mac desktop. When I import the file into smoke it sample rate converts it to 44.1 KHz.: Option_click on the file in the Smoke desktop confirms this. All hardware input and output sample rates are set to 48K. Is there a setting that I am missing in Smoke?
The default sound for my Mac is set to the AJA card and no other audio software is running.
Merged two mono tracks into a stereo one, then highlighted the clip and tried to cut the clip using ctrl-V - all that happens is the track becomes unhighlighted.
If i use shift Ctrl-V, then the track does get cut but so does every other track!
I checked the keyboard shortcuts and i'm pressing the right keys, just not seeing anything happen...
I'm using the PR5 version on OSX10.7.3
I use pr5. I got a clip (.mov with audio) and imported the clip and enable the cache source media so it will be transcoded into stone. Now after i edit the clip into the timeline , i want to reveal the master clip. so i select the clip and the audio as well (sync) and try to do match frame (F key). I got new clip reveal in my desktop but only the video, it got no audio. How to get the audio back from the original source ? why the match-frame is ignoring the audio ? so far i have to do silly steps by re edit the source clip back to the timeline to pair back with the audio. is this a bug ?
View 2 Replies View RelatedWhen exporting a sequence I'm having problems with my audio being distorted, like it was peaking. Audio in the timeline sounds good, I did have some gain adjustments on some clips which I removed to see if that was the issue and the same problem is happening. No other effects other than some reverb are present.
Faders were normalised and audio peaked at -1dB only for a few seconds, the normal audio levels are about what is shown in the screenshot, around -6 to -5 dB.
This was exporting via the iPod preset with not further adjustments.
MacBook Pro Retina 15" - OS X 10.8.4 - 4TB G-tech G-Raid - Smoke 2013
MacPro 5,1 - OSX 10.8.5 - 64GB Ram - 12TB Pegasus RAID - 24 inch HP DreamColor - Smoke 2013 - Maya 2013
I need my audio to reverse with my video clip, doesn't seem like Smoke wants to do that or am I missing something?
View 4 Replies View RelatedI have a timeline where the actual movie and music start at 10:00:00:00. Before that, I have a black chart with names on it. There is no audio underneath. But when I export a quicktime file, it pulled the music up front to the first frame of my chart (therefore, the music is too short now and out of sync...) Why is smoke doing that and how can I get Smoke to output the qt correctly?
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
How is the best way to keep sync with clips that have audio. In Premiere for example, when a clip contains audio it handles both video and audio as a single thing until I explicitly unlink them. But in Smoke, even with the option Select linked, which as far as I can tell it only works for selecting and activate that little arrow (do not remember the name of the function) in the tracks table, keeps all ok but only on that track.
This is the normal operation of Smoke? He really will always treat the audio and video of same clip as separate things? Am I missing something? Because at least for me, that's came from Premiere, always be remembering to set all the tracks and always go to the menu and select Enable linked is what most complicates the editorial work in Smoke.
The short cut key to maximize actions outputs was Ctrl + C. What is it now?
View 4 Replies View RelatedI was wondering if i could have an object reflect in a surface inside Action? I mean getting the geometry to reflect in a ground plane f. ex.?
View 1 Replies View Relatedwhat going on if I use gap effect as back clip and add action node,
How come no result in result (f4) view all is black.
But if I add clip as a back everything goes normal??
GAP effect will work just fine If I not using action node on the schematic in cfx.
I have a camera move in action to move between a couple of still images. This is going into an interlaced programme so I'd like the move to be interlaced (50i). Currently the ouput is rendering progressive frames and I can't see how to change this within cfx/action.
View 5 Replies View RelatedI have a shot with a white background. There is some text that has to disappear somewhere into the white, so I figured, I'm just gonna load in a white color source, lay it on top, and put it in front of the text in z space. But nope, the white doesn't match the background white. It looks grey. I tried to apply a CC, but that doesn't change anything.... I already restarted smoke, but that didn't fix it either.
What else can I do?
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
I have a shot where I added a lensflare to my light. Now, in the picture you see, I separated couple parts of the picture, so some can be affected by the light and some won't.
I always thought I would achieve that by hitting Space+L and drag a line from the light node to the image I want to affect and hold down ALT to connect the light node to the image that I want to exclude. But as you can see in the picture, the glow of the lensfalre is not only on my headlamps of the car, but it's also on the pillar next to it.
I also arranged everything in Z space, so the light would be behind the pillar, but it doesn't work the way I want it to....
Plus, I was wondering, is there a way to do a defocus on the lights, so they look like the ones in the upper left corner?
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)