VideoStudio :: X3 - Audio Track Be Mixed When It Is 2ch Stereo?
Jun 20, 2011
I am using VSX3 and have a question about whether it is possible to mix/edit the audio track for the MTS files added to the project when the audio is 2ch stereo?
Basically what I want to know is how to remove or lessen voices that are close to the camera's mic, when I am really interested in keeping the audio of the subject I am focused/zoomed in on?
Case in point, my wife was filming my son's pre-k moving up ceremony and we have some priceless video of him singing up on the stage. But a portion of the soundtrack is ruined by her yelling at my mother-in-law that she is holding the point-n-shoot camera upside down and the ensuing conversation. In this case, editing the clip or adding music and fading out the clip audio won't cut it.
View 1 Replies
ADVERTISEMENT
Oct 26, 2012
Merged two mono tracks into a stereo one, then highlighted the clip and tried to cut the clip using ctrl-V - all that happens is the track becomes unhighlighted.
If i use shift Ctrl-V, then the track does get cut but so does every other track!
I checked the keyboard shortcuts and i'm pressing the right keys, just not seeing anything happen...
I'm using the PR5 version on OSX10.7.3
View 1 Replies
View Related
Jan 28, 2013
My mic I'm using to record is a mono (single channel) and I find that no matter what I do in VSPX5, the audio to my video stays in mono. I've tried saving an audio file of the clip as mono or stereo. I've tried saving the video using different compressions as well. Still, the audio only comes out of one speaker.
View 1 Replies
View Related
Jan 17, 2012
I see that you can split the audio from the video. Can you do the reverse and link the audio back into the video say after you split, cut and mute an off camera scream? It would just make it easier to add clips before the edited one, although it's not all that hard to sync things up.
View 2 Replies
View Related
Feb 20, 2014
Or can I? "Link" is greyed out
View 8 Replies
View Related
Dec 28, 2012
I decided to make the jump from X3 to X5 ultimate to give Corel a try again, actually the deciding factor for me was the included mercalli stabilization as it seems to be pretty good.
Anyway, I created about a 10 minute movie from a few videos, which is divided into many clips. Now I want to disable the audio from the video track and add a sound track. I found a nice sound track with the included auto music, but I can't figure out a way to mute the entire audio track from the video so I only hear the added music. I can only see how to do it one clip at a time. Is there a way to do all the clips at once?
I guess in hindsight I should have muted the audio from the video before splitting them into clips, but I've been used to using Vegas which allows you to mute the audio from the entire video track and thought I could do it later with X5.
Am I stuck with doing one clip at a time? Or do I have to save the movie then bring it in as one large clip then mute the audio from the video so I can replace it with a music track? the mercalli seems to work pretty good - which version it is they bundle with X5?
View 2 Replies
View Related
Sep 30, 2013
I am using VS4. Is there a way to equalize audio music tracks? I know that there is a "normalize audio " option just prior to burning but that is for videos only. For whatever reason the last two videos I have made have varying audio volumes on different music.
View 2 Replies
View Related
Sep 10, 2012
I am trying to remove the original audio track and replace it with a new one. Is the only way to do this by muting the original audio track, or can you delete it completely?
View 1 Replies
View Related
May 23, 2012
Upon uploading a video clip that already has video sound attached, why am I not able to hear that video sound when I try to edit my video?
View 4 Replies
View Related
May 27, 2012
I am evaluating Video Prox5,and wanted to know if it nis possible to place cue markers on Audio track as an aid to sync particular points of video and Audio.
View 1 Replies
View Related
Mar 1, 2012
I am assembling a project with a few video, overlay and audio clips. Everything is timed the way I want, but I decide to add a few seconds to the beginning. I insert the additional clip and all the video clips move over, but all the other clips (overlay and audio) do not move. It takes a long time to adjust everything and get the timing correct again.
Is there anyway to LOCK the audio and overlay clips to their corresponding video, and have them move together when I insert video in the beginning?
View 3 Replies
View Related
Mar 31, 2012
I want to keep the original audio captured with video footage but remove the actual video and replace it with other video footage taken and still images. I'm guessing that this is possible using the overlay track, but ideally, I would like to just remove the original video so that I can use two new images between the main track and other "images" on the overlay track. I have no need for the original video, just the audio. Is this possible? If not, is there any way to insert audio from video onto either a music or narration track scrap the video portion?
View 3 Replies
View Related
May 13, 2013
I have split the audio from the video track and I am now trying to "lift" a copy to put through a sound editor. I then intend to replace the original audio track. (or to put on audio track 2 and mute 1). I haven't as yet found a way to lift the audio track and load into a separate file.
View 2 Replies
View Related
Mar 6, 2013
I just got done installing the Corel Videostudio Pro x6, I am trying to import my own personal music-audio file into the music track, however when I do the system crashes or another way of saying it, a window pops open saying Corel has stop working. This same problem happen with the x5 Pro version. I notice that the pre-loaded audio files in Corel are files of MPEG-1...do I need to convert my MP3s into MPEG-1 in order for this to work?
I have a few converting tools but none of them can convert MP3s into MPEG-1..
View 2 Replies
View Related
Sep 20, 2011
I know this is an easy one, but how do you change audio levels (volume) inside a song track, including length of fade in and fade out?
View 2 Replies
View Related
Jun 20, 2012
I have seen a number people new to smoke get confused when trying to edit mono audio source to a stereo track only to find the audio doesn't doesn't appear.
How about a preference that automatically splits the mono audio so that it edits to the stereo track?
If it was on by default it would definitely be of less confusion to new users
Or perhaps a dialogue box explaining why the edit did not work due to the differing audio properties.
Great work with getting smoke to where it is!
View 1 Replies
View Related
May 22, 2013
When I import an audio file into Smoke it ends up being longer, and plays slower than it does outside of Smoke.
The file is a stereo mp3, 16 bit, 44kHz
Its normal duration is 13:19
In Smoke it shows up as 13:30
I tried applying a Time Warp to speed it back up but I can't apply the speed change. It is reset back to 100% after trying to change it.
Even if I don't import the file, in the MediaHub, in preview mode it shows up with a duration of 13:30 and plays slowly.
The project has a 24P frame rate in case that has any influence.
View 7 Replies
View Related
Jan 22, 2014
My video clip, brought over into Premiere CS6 from Final Cut Pro 5, has the usual left and right audio tracks, but in Premiere they are not linked into a stereo pair. Thus the volume level has to be adjusted separately in each track.
In Final Cut, I can quickly convert two independent audio tracks into a stero pair by selecting the tracks and then going to the menu Modify > Stereo Pair. I can't figure out how to do this in Premiere.
When two audio tracks are not linked, the volume level has to be adjusted separately in each track, which wastes time. But after two tracks are linked into a Stereo Pair in Final Cut, adjusting either track adjusts them both, together. That's what I want to do now in Premiere.
So, how do I make two separate audio tracks into a linked Stereo Pair in Premiere?
View 14 Replies
View Related
Jan 28, 2012
When cutting video shots in sync with a music track how can I remove part of a clip and replace with a new shot. I know there is a replace clip facility but there appears to be no way of editing the new clip. What I would like to do is leave blanks in sync with the music and fill in correct length of shot later. The same question for overlaying video shots of an interview and holding sync when returning to interviewee.
View 4 Replies
View Related
Dec 9, 2013
In VideoStudio 6, how does one connect the voice track to the video during the editing process?
My specific issue is that I have to go back and edit material sometimes that precedes the voice track I already have laid down, but when the time frame of the material after my new edit I have to go back and drag the voice track to the proper location. I would like to be able to permanently "attach" the voice track to the specific video clip and have it follow that clip as it is moved, time wise, during the editing process.
Is there a means to make this happen?
PS - I realize there is a work around way - just publish each clip and then rebuild the final project but that is NOT what I want to do.
View 2 Replies
View Related
Oct 16, 2013
I am trying to export my 3D project as 3D (MVC) but I can't get VS to preserve the 5.1 sound. Either I get a 3D movie file with stereo sound or a movie with surround sound but then it's only 2D.
How to do this properly? I also tried creating a new movie template but it doesn't offer any 3D/MVC export option.
View 3 Replies
View Related
Mar 18, 2013
I captured video that is mono, and want to make it stereo? VS5 . I tried splitting the audio and trying to place it in another track which didn't work the closest I can get is to set it on 5.1 channel. But it doesn't quite sound correct in the right speaker.
View 2 Replies
View Related
Aug 8, 2013
I am using a JVC GY-HMZ1 stereo video camera with Videostudio 6X so my files don't need to be tagged 3D so my question is how can i add titles and effects and still retain 3D stereo in my final output?I am new to Videostudio 6X pro
View 1 Replies
View Related
Nov 10, 2012
I recently burned video footage to DVD with VS Pro X5 (with the parameters already set in the VS Pro Burning module), and played the DVD on my DVD player...the DVD played pretty well on my player, though some "striations" or moire appeared in the background on some building sidings early on--but it didn't distort the overall play-ability of a particular sequence...
However, when I played the DVD on a friend's DVD player, the beginning of the DVD broke up and "de-pixillated," for want of a better word--though 2/3rds of the DVD's later footage played OK (and a commercial DVD played just fine on my friend's DVD player just before all this)...
That result left me very puzzled, why it should play more-or-less OK on my own DVD player, but so horrendously on another DVD player...
Is there some VS Pro (or a utility program) filter that I can run the footage through prior to/during a DVD Burn in VS Pro to get a smooth rendering of the footage?
View 4 Replies
View Related
Jan 31, 2012
Is there a way to adjust left or right stereo volume separately? I recorded a live performance with vocals to left and music to right so I can have more control of the mixing levels. So far the only thing I can figure out is to import the same video file into the music track and duplicate the audio so that it plays left, and the video track plays the right.
View 2 Replies
View Related
Jul 20, 2012
I am bringing DPX files into Photoshop as Image Sequences. Afterwards, I am using Export…Render Video, set to Adobe Media Encoder, H.264.
The resulting H.264 files have an AAC audio track (presumably, with nothing but zeros, because there is no audio with this material.) How do I prevent Photoshop from adding an audio track?
I don't see a way to delete the audio track from the timeline. I don't see a way to export only video in the Render Video settings.
View 3 Replies
View Related
Feb 6, 2012
I am using Corel Video Studio Pro x4 Ultimate with SP2 and I getting significantly lower audio volume in left channel for all stereo downmix streams. The problem is consistent regardless if I make an AVCHD video with background music, or create slide show form still images with music.
I want to eliminate any possible PC setup or installation issues and narrow down the problem to program itself. I have attached sample of stereo 1 KHz 0db test tone, which could be used for this test.
1. Open new project
2. Choose Settings --> Enable 5.1 Surround sound and Wide screen 16:9
3. Import to the library few pictures and 1KHz 0dB.wav
4. Place on the time line pictures (I used 5 sec duration for display and 1 sec cross-fade transition)
5. Add 1 KHz 0 dB.wav to the Music track
6. Select Share tab --> Create Video file --> Custom
7. Choose MPEG Transport Stream .m2ts
8. Select Options --> General 1920x1080 --> 29pfs --> upper field first
9 Select Compression --> Quality 100% --> Dolby Digital Audio --> 3/2 (L,C,R,SL, RL) --> 448 kbps --> OK
4. Name the file and save it.
5. Play rendered file on 2 speaker system (TV or PC)
Playing 5.1 surround sound movies on 2 speaker (i.e. stereo) system will likely force to play Stereo downmix stream only from 5.1 sound. You then should be able to observe that the left channel volume is reduced by -14 dB. (at least this is what I get) which causes significant stereo balance shift.The same test can be done with music files, but if you want to measure the volume drop, test tone is the best way to quantify it.
View 5 Replies
View Related
Apr 11, 2013
I recently started using my DSLR (Nikon D800) to shoot some video. My wife has several musical projects and I'm just shooting some basic demo videos. But since these are musical projects, the audio is important. And while I plug the camera microphone port directly into the mixing board, and get really good audio, I still want to be able to work with the audio track separately to do some basic equalization, volume adjustment, etc.
Photoshop's video handling is pretty basic, and it seems all I can do with the audio track is delete it, adjust the master levels, or add an outside track.
Is there a way I can strip off and save the audio to a separate file and process it with audio software (what software?) so I can then re-add it Photoshop?
Am I approaching this from the wrong angle? I don't want to spend tons of money on a full video editing package. Is there audio software that can open the video file and just edit the audio track?
View 1 Replies
View Related
Feb 16, 2011
Is there any way to push the video in the video track after the title track is completed ....
View 4 Replies
View Related
Oct 24, 2012
How do I remove the audio track from a video clip which I am using in a Elements 10 slideshow?
View 4 Replies
View Related
Feb 13, 2013
Is it possible to edit and play sound from a video clip and Audio sound track in a Slide show?
View 1 Replies
View Related
