I am trying to remove the original audio track and replace it with a new one. Is the only way to do this by muting the original audio track, or can you delete it completely?
View 1 RepliesI want to keep the original audio captured with video footage but remove the actual video and replace it with other video footage taken and still images. I'm guessing that this is possible using the overlay track, but ideally, I would like to just remove the original video so that I can use two new images between the main track and other "images" on the overlay track. I have no need for the original video, just the audio. Is this possible? If not, is there any way to insert audio from video onto either a music or narration track scrap the video portion?
View 3 Replies View RelatedI see that you can split the audio from the video. Can you do the reverse and link the audio back into the video say after you split, cut and mute an off camera scream? It would just make it easier to add clips before the edited one, although it's not all that hard to sync things up.
View 2 Replies View RelatedI decided to make the jump from X3 to X5 ultimate to give Corel a try again, actually the deciding factor for me was the included mercalli stabilization as it seems to be pretty good.
Anyway, I created about a 10 minute movie from a few videos, which is divided into many clips. Now I want to disable the audio from the video track and add a sound track. I found a nice sound track with the included auto music, but I can't figure out a way to mute the entire audio track from the video so I only hear the added music. I can only see how to do it one clip at a time. Is there a way to do all the clips at once?
I guess in hindsight I should have muted the audio from the video before splitting them into clips, but I've been used to using Vegas which allows you to mute the audio from the entire video track and thought I could do it later with X5.
Am I stuck with doing one clip at a time? Or do I have to save the movie then bring it in as one large clip then mute the audio from the video so I can replace it with a music track? the mercalli seems to work pretty good - which version it is they bundle with X5?
I am using VS4. Is there a way to equalize audio music tracks? I know that there is a "normalize audio " option just prior to burning but that is for videos only. For whatever reason the last two videos I have made have varying audio volumes on different music.
View 2 Replies View RelatedUpon uploading a video clip that already has video sound attached, why am I not able to hear that video sound when I try to edit my video?
View 4 Replies View RelatedI am using VSX3 and have a question about whether it is possible to mix/edit the audio track for the MTS files added to the project when the audio is 2ch stereo?
Basically what I want to know is how to remove or lessen voices that are close to the camera's mic, when I am really interested in keeping the audio of the subject I am focused/zoomed in on?
Case in point, my wife was filming my son's pre-k moving up ceremony and we have some priceless video of him singing up on the stage. But a portion of the soundtrack is ruined by her yelling at my mother-in-law that she is holding the point-n-shoot camera upside down and the ensuing conversation. In this case, editing the clip or adding music and fading out the clip audio won't cut it.
I am evaluating Video Prox5,and wanted to know if it nis possible to place cue markers on Audio track as an aid to sync particular points of video and Audio.
View 1 Replies View RelatedI am assembling a project with a few video, overlay and audio clips. Everything is timed the way I want, but I decide to add a few seconds to the beginning. I insert the additional clip and all the video clips move over, but all the other clips (overlay and audio) do not move. It takes a long time to adjust everything and get the timing correct again.
Is there anyway to LOCK the audio and overlay clips to their corresponding video, and have them move together when I insert video in the beginning?
I have split the audio from the video track and I am now trying to "lift" a copy to put through a sound editor. I then intend to replace the original audio track. (or to put on audio track 2 and mute 1). I haven't as yet found a way to lift the audio track and load into a separate file.
View 2 Replies View RelatedI just got done installing the Corel Videostudio Pro x6, I am trying to import my own personal music-audio file into the music track, however when I do the system crashes or another way of saying it, a window pops open saying Corel has stop working. This same problem happen with the x5 Pro version. I notice that the pre-loaded audio files in Corel are files of MPEG-1...do I need to convert my MP3s into MPEG-1 in order for this to work?
I have a few converting tools but none of them can convert MP3s into MPEG-1..
I know this is an easy one, but how do you change audio levels (volume) inside a song track, including length of fade in and fade out?
View 2 Replies View RelatedAll I am trying to do is cut out small portions of a video just to get rid of the parts I don't want. However, when I use the multi-trim feature, it strips the original audio. I know it does this so you can create your own video and then overlay your own audio. However, all I want to do is just cut out a few portions of the video while retaining the original audio minus the parts I cut out (i.e. I don't want to have to overlay any audio for this project, I just want a simple way to cut a few parts out and be done).
View 8 Replies View RelatedWhen cutting video shots in sync with a music track how can I remove part of a clip and replace with a new shot. I know there is a replace clip facility but there appears to be no way of editing the new clip. What I would like to do is leave blanks in sync with the music and fill in correct length of shot later. The same question for overlaying video shots of an interview and holding sync when returning to interviewee.
View 4 Replies View RelatedIn VideoStudio 6, how does one connect the voice track to the video during the editing process?
My specific issue is that I have to go back and edit material sometimes that precedes the voice track I already have laid down, but when the time frame of the material after my new edit I have to go back and drag the voice track to the proper location. I would like to be able to permanently "attach" the voice track to the specific video clip and have it follow that clip as it is moved, time wise, during the editing process.
Is there a means to make this happen?
PS - I realize there is a work around way - just publish each clip and then rebuild the final project but that is NOT what I want to do.
I am bringing DPX files into Photoshop as Image Sequences. Afterwards, I am using Export…Render Video, set to Adobe Media Encoder, H.264.
The resulting H.264 files have an AAC audio track (presumably, with nothing but zeros, because there is no audio with this material.) How do I prevent Photoshop from adding an audio track?
I don't see a way to delete the audio track from the timeline. I don't see a way to export only video in the Render Video settings.
I recently started using my DSLR (Nikon D800) to shoot some video. My wife has several musical projects and I'm just shooting some basic demo videos. But since these are musical projects, the audio is important. And while I plug the camera microphone port directly into the mixing board, and get really good audio, I still want to be able to work with the audio track separately to do some basic equalization, volume adjustment, etc.
Photoshop's video handling is pretty basic, and it seems all I can do with the audio track is delete it, adjust the master levels, or add an outside track.
Is there a way I can strip off and save the audio to a separate file and process it with audio software (what software?) so I can then re-add it Photoshop?
Am I approaching this from the wrong angle? I don't want to spend tons of money on a full video editing package. Is there audio software that can open the video file and just edit the audio track?
Merged two mono tracks into a stereo one, then highlighted the clip and tried to cut the clip using ctrl-V - all that happens is the track becomes unhighlighted.
If i use shift Ctrl-V, then the track does get cut but so does every other track!
I checked the keyboard shortcuts and i'm pressing the right keys, just not seeing anything happen...
I'm using the PR5 version on OSX10.7.3
Is there any way to push the video in the video track after the title track is completed ....
View 4 Replies View RelatedHow do I remove the audio track from a video clip which I am using in a Elements 10 slideshow?
View 4 Replies View RelatedIs it possible to edit and play sound from a video clip and Audio sound track in a Slide show?
View 1 Replies View RelatedI am exporting dailes clips.We record dual system and there are two different audio levels - on the two different channels.However, when I export a clip from Premiere and set the audio option tol the uncompressed codec it defaults to a "single track" audio layout with no option to change. However, if i change the codec to AAC or any other I am allowed to chose whether I want a single mono track or a stereo track.
Additionally - if that single uncompressed track is an amalgamation of my original two tracks - or if it has just defaulted to one or the other.
I have recently upgraded my old VideoStudio 12.00 to VideoStudio Pro X4 and have only just started using the program again after a couple of years of absence so I am still on a learning curve.
Can I extract the audio from a video clip and if so how and how can I convert it, if necessary into an Audio Interchange File Format, so that I can export it to a program such as Audacity for removing background wind noise before importing the Audio back into the videoStudio project.
I have tried using all the audio filter functions in VS to remove the background noise, to no avail.
If I have a picture with a transparent overlay, along with a nontransparent version of the overlay, is there a way I can remove the overlay from the original image?
One application for this would be removing GUIs from video game screenshots.
I remeber at one time I was able to convert a color image into black & white by reassing Control, Shift, U. Then there was another command that would allow be to add teh original colors back in where I wanted them, giving me a color and black & white image. I just cannot remeber how I did the second step.
View 2 Replies View RelatedI have a problem with Video-Studio ProX 4: If I insert a new file in the midst of a cued sequence of files, than the cued video-files of the video track give place and stay synchronized, but NOT the subtitles on the title track - therefore I must they all manual synchronize again with the video-track, - what can I do?
View 2 Replies View RelatedI've installed NewBlue ColorFast, and it shows up in VS X6 as expected. If I drag and drop it onto the video track, the changes I make apply, no problem. But if I drag and drop it onto the overlay track, then make the changes I need, they don't stick … they go away when the dialogue is closed. Is this filter limited to the video track only? Or do I have a problem here?
View 6 Replies View RelatedI rendered (in animation software) a series of .png files with transparency for an overlay in VidStudio. 150 of them that all need to be shortened from the default photo duration of 3:00 seconds. Plus, for each one, I will need to adjust the size of the overlay track. Is there a way to manage the entire track for these adjustments? Or a place to adjust the preferences..?
View 6 Replies View RelatedWhen I try to combine 2 videos to play over each other (i.e. one full screen one anchored in a corner) the overlay track plays at an accelerated rate with no sound, whereas the main video will play as normal. However if I switch them around the same problem arises, the overlay video plays fine the main accelerated with no sound.
If I play them separately they will both play fine. The video I am trying to anchor was recorded with a webcam and therefore may be the problem. If I need to give more details w/ specs etc.
I have been recording some narration in little chunks (for easier editing if needed), but they are called uvs130819-011.WAV. I understand about the date, but I would rather have them named by the first few words of the "paragraph" read, or something else that would make more sense to me.
Is there a way to change the name of the sound clips ?
I have googled about changing the height of individual tracks and couldn't find much. Is it adjustable? If not, is this planned for the future?
View 1 Replies View Related