Any tips for synching audio with on-camera reference mic? Also, once synched in timeline, is it possible to merge audio with video and create a clip that can be organized in media hub/bins?
View 2 RepliesIs it possible to nudge a video segment or audio clip in timeline with a short cut key?In FCP7 I used this all the time.
View 4 Replies View RelatedI need my audio to reverse with my video clip, doesn't seem like Smoke wants to do that or am I missing something?
View 4 Replies View RelatedI imported an AAF from Premiere Pro and the media came in separately from the video. So I have a video clip and a separate audio clip instead of the two together. Is this because I chose "Save Sources Separately"?
View 6 Replies View RelatedI am currently trying to set my audio to coreaudio line out, and video to my kona.
I quit smoke, changed to coreaudio in the smoke setup, hit apply, and then quit the app. when I restart smoke it tells me that it is disabling the audio output due to an audio / video mismatch.
Below I have three screen shots. The error message, my system sound panel, and the smoke setup window. Why I am geting this error?
I'm running 10.8.4 with a kona 3g, and smoke 2013 ext1
New update seems to have caused any QT with audio and video to be locked together....ie if I lift the video, it'll lift the audio, or if I apply an effect to audio, the video becomes unrendered, where previously it wasn't. Used to be able to modify or edit without V&A locked together.....
smoke2014advsp2
Is there any way to apply auto safe white/black point limiter to video and the same with audio?
View 2 Replies View RelatedI have recently upgraded my old VideoStudio 12.00 to VideoStudio Pro X4 and have only just started using the program again after a couple of years of absence so I am still on a learning curve.
Can I extract the audio from a video clip and if so how and how can I convert it, if necessary into an Audio Interchange File Format, so that I can export it to a program such as Audacity for removing background wind noise before importing the Audio back into the videoStudio project.
I have tried using all the audio filter functions in VS to remove the background noise, to no avail.
1. I put a clip in a timeline , then i put a cfx clip on top of the first clip. Add axis clip to cfx clip, set transparancy to 100% (fully transparent) , when hit render , this cfx is still calculated.
2. if i have stack of cfx clips, the clips are solid (no matte or transparancy ). one clip is on top of the other. In the top layer , i add a axis fx and cut a very small hole. We can see even a very small hole ( that will exposed small part of the bg ) will trigger smoke to render both of the clip full frame. Actually i only will see small part of the BG so i'm expecting smoke to render only that visible pixel. How to control this ? In some case i will waste my time waiting smoke to render part that i don't need.
I have video clips on several layers in the timeline and want to mute the audio of specific video clips - they are on video lines, not the audio line.
View 4 Replies View RelatedI am attempting to completely strip and/or delete the audio from a video clip after I drag it into the time line.
The purpose is to not only eliminate the audio entirely since it will never be used with the video, but to also make the total file size smaller.
I notice that when I "split the audio" from the video clip, the audio clip is still present in the video and the file size is the same -- even after I have deleted the "now split audio" from the time line. When I right click on the video clip, I also notice that the audio is simply muted, not deleted.
Is there any way to totally delete the audio?
This is a daily occurrence. As I go along editing, I inevitably come upon some video clip (or audio clip) on my timeline that is missing it's original audio (or video) counterpart. I've previously deleted the audio portion (or video) at some point earlier in the edit, when it made sense to do so. Now, though, I change my mind, or I need to hear the audio to sync other clips, or just hear the audio for reference, etc.
How do I bring back the corresponding media? I love the new "Join Through Edits" command in Premiere Pro CC, it seems that a companion feature would be something like "Restore Original Linked Audio / Video"
Match Frame seems close to what I need, but involves a few more steps than a right-click, or keyboard shortcut (maybe I don't properly understand how it works). Does any command exist that would do what I'm needing? I can't imagine I'm the only one who would need this function DAILY.
How do I remove the audio track from a video clip which I am using in a Elements 10 slideshow?
View 4 Replies View RelatedIt was working before. Now I can't insert any audio at all. I even tried using some of the video clips that I have already extracted audio from and they no longer work. When I have it up in the source box I can play it and the aeudio is there. But if I ovrwrite the clip or drag the clip it adds the video only with no audio. Even if I try to drag just the audio it won't allow me to put it in any ofc the audio trays. Did I acidentally push a button and turn iaudio off. How do I fix this?
View 1 Replies View RelatedAll of a sudden, I'm unable to scroll through clips with real time feedback. Did I turn on some preference?
Also, I've noticed that when I'm in Action, I don't get realtime feedback going to the broadcast monitor, but rather the image catches up upon pen up. I don't see anything about it in the options in Action or global preferences.
is there a way to put a LUT on a clip, without having to 'bake' (process) it? So I can turn it on and off?
Our process is:
import R3E Raw files with User Settings in Red Log (so the image looks flat, with most color information).
then turn on a Display LUT (which settings would I use here?)
then do the color correction with the LUT on and after I'm finished, turn the LUT of and then export a dpx 10 Bit sequence to the vfx department, so they can work with it (in fusion).
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
I just started playing around with Smoke 2013. I played around with the CFX and did some keying. Now, on the timeline, I have a clip with CFXa and an axis effect. Now I thought, that it should be a container, and that I could simply double click the clip, step into the container and copy out the matte. But that doesn't work anymore, since double clicking now enters the editor again.
So, how can I access the matte (and how can I step into the container)?
Oh, and now that the unrendered clip is on the timeline, I only get the message Unrendered Frame. Obviously Smoke can't play back an unrendered clip, but why doesn't it at least show the frame I'm parked on? And also, I started rendering, but it took forever, so I stopped after 10 min. In Smoke 2012 it rendered at least partially, but now I still only have a dotted line......
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
Tell me that I'm wrong on this but with the new CFX clip in SP3, it looks like you can't update the original CFX Clip and have it update/link to all shots where it is placed. It would be so perfect. Now it is just another "fancy" way to copy&paste comps?
View 6 Replies View RelatedIs there a way to remove/delete the history from a rendered clip, other than re-rendering the clip without history enabled? Flame has a desktop function that can delete the history from an entire desktop (which would be convenient in my case here on Smoke 2012).
View 2 Replies View RelatedIs there any short cut for moving the clip from one track to other(above or below track)?
like we have in FCP.
can i clone (not copy) cfx clip ? so any update made to the cfx clip will automatically update all the instance ?
View 2 Replies View RelatedI created a stereoscopic timeline in Smoke. That seems to work so far, but now I want to output it in full resolution on a 3D TV (Samsung). The TV only supports HDMI in.
I'm working on a Smoke for Mac 2012 with a NVIDIA Quadro 4000 (which has 1xDVI and 2x Display Ports). And we have the AJA Kona 3G (SDI out and mini HDMI). We have a reference monitor which is connected via SDI and that works.
We tried to connect the Mac via mini HDMI to HDMI. We did get a signal from Final Cut Pro, but we didn't get a signal out of Smoke.
I tried all kinds of settings, but there is no way of outputting an image from Smoke. What options do we have, so we can get a 3D signal out?
I heard that Smoke for Mac doesn't support Dual SDI out. Is that right? Would it work to simply buy a converter from SDI to HDMI? Would I still get full res HD out then?
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
I have R3D footage which I imported in 2K. For a couple shots I need a higher resolution, so I matched out my original clip from my timeline, saved it to my library, double clicked and selected Modify Clip History, where I set my layering to full. I don't change anything else, however, now my In and Out TC are not correct anymore! Everything is fine, just until I hit the Modify Clip History and Apply the changes.
View 5 Replies View RelatedIf there is still an option somewhere where I can force my import to be frames and set duration to 5 or 10 frames like in 2012. or force a set of sequences o be imported as one clip.
Update: Found the frames option but no frame durations available. But no single clip available in case of importing multiple sequences or frames that need to be in a single sequence.
Currently dancing between Flame Premium 2013x2sp3/2013Sp4 nd Smoke on mac 2013Ext1
I am trying to export a :30 spot and only :04 clips are exported.
View 1 Replies View Relatedwhat does exactly mean the red line under a clip in the timeline ?
I noticed the clip with red timeline has red effect, but it doesn't seems to mean i have to render them.
in paint module, when i do the 'wipe' , i only can wipe the single/current frame. I can't find the setting to wipe the whole clip. am i allowed to wipe the whole clip using a single click ?
View 1 Replies View RelatedHow to hide selected clips in timeline without turn off layer visibility (eye icon) ? i found no hotkey and also there's such option in contextual (RMB) menu.
View 1 Replies View RelatedSo I have a soft imported clip with cfx applied...right click consolidate handles...and it seems to work...
But then archiving gives a crazy size estimate so I checked handles again...it turns out the handles haven't been consolidated at all. Timeline says it has been consolidated but entering cfx and exiting again the handles come back.
I got a clip in timeline, apply connect fx then cut the clip (ctrl-v). The problem i cannot uncut this clip immediately , even if i haven't changed/modified anything yet. The simple solver will be throw out one part and trim back the clip. I'm just curious .. Is this normal ?
View 2 Replies View RelatedKind of at my wits end with this software. Decided to give it a proper test on a job involving some wire removal and a bit of 3D comping. Every day brings hourly crashes, corrupted sequences, black frame renders, inability to archive projects, on and on. It's like every shot on this project is a minefield of troubleshooting and trying to find workarounds just to get a render complete. I'm spending easily an extra 20 hours a week just trying to overcome problems with the software.
Now I've got a sequence that I literally spent 4 hours on and just trying to open it brings smoke to a hard crash. Trying to make a cfx clip of the sequence takes half an hour to save so I've only been doing that once a day.
Smoke 2013 EXT1
iMac i7 3.4Ghz
NVIDIA GeForce GTX 680MX 2048 MB
32GB RAM
MAC OS X 10.8.3
Promise R6