New update seems to have caused any QT with audio and video to be locked together....ie if I lift the video, it'll lift the audio, or if I apply an effect to audio, the video becomes unrendered, where previously it wasn't. Used to be able to modify or edit without V&A locked together.....
smoke2014advsp2
I've been trying to import a XML from FCP (xml version 2), bun everytime I only get a timeline with unlinked media...
I placed the XML one directory above my media. But when I drag the XML into my library (having Store Local Copy turned on), I only get the "empty" timeline...
When I try to relink my media from the gateway, it's not relinking anything (it says, no video and audio found). Is there no way to import an XML without having to import the original media into my library? Also, no matter what kind of clip I'm importing, it always soft imports my clips, although store local copy is turned on...
Attached is a picture with the settings for my xml import (and on top the unlinked xml, which says SOFT, although, as you can see on the bottom of the screen store local copy is enabled).
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
I'm having some difficulties in importing the material for the 2013 Smoke PR-2, when he gets care LINKED with the file, if I change the file folder on the desktop it disappears. How should I proceed?
View 9 Replies View RelatedI imported an AAF from Premiere Pro and the media came in separately from the video. So I have a video clip and a separate audio clip instead of the two together. Is this because I chose "Save Sources Separately"?
View 6 Replies View RelatedI am currently trying to set my audio to coreaudio line out, and video to my kona.
I quit smoke, changed to coreaudio in the smoke setup, hit apply, and then quit the app. when I restart smoke it tells me that it is disabling the audio output due to an audio / video mismatch.
Below I have three screen shots. The error message, my system sound panel, and the smoke setup window. Why I am geting this error?
I'm running 10.8.4 with a kona 3g, and smoke 2013 ext1
Any tips for synching audio with on-camera reference mic? Also, once synched in timeline, is it possible to merge audio with video and create a clip that can be organized in media hub/bins?
View 2 Replies View RelatedI´ve a problem when import all types of audio file, the application crash...but is curios that if I export the file that crash the application (in Lost and found) to the desktop and try import this audio there aren´t problem..import ok...and if this audio is edited with a image and import with import media tool (audio and video) import ok.
Another question about import / export...when a tried export a quick time in the column of status of background tasks appear the message that my "host" does not seem to exist, and not process the quicktime move.
When I try to import clips into Smac 2013 using the 'Create Project Media' option, I get the following error:
Cannot Connect to Back Burner Manager
Using Extension 1, I am importing an RGB Uncompressed clip with 8 channels of audio with 7&8 a stereo pair. Only the first 6 come in correctly, the 7th channel has no audio and is not marked as a stereo channel. The 8th channel is not shown at all.
I tested the same clip in Flame 2012 and all 8 channels import correctly.
Is it possible to nudge a video segment or audio clip in timeline with a short cut key?In FCP7 I used this all the time.
View 4 Replies View RelatedIs there any way to apply auto safe white/black point limiter to video and the same with audio?
View 2 Replies View RelatedI get this prompt while copying sequences between projects with gateway-linked footage, and I'm not sure what it means.
---------------------------------------------------------------------
CLIP MGT: Unmanaged media contained in selection. Store media on Wire?
---------------------------------------------------------------------
Is it asking me if I want to store a local copy or stonifize the media?
When I import the xml it says connected but shows no video.
View 7 Replies View RelatedI can't render anything and I know this has been addressed before, but I still don't see a solution, I have no Available Local Services under my Preferences/Backburner. We wan't to purchase smoke but can't trust that it will work on our system.
View 2 Replies View RelatedIs there a way to save a CFX set up with its media (in my case, still images) as a preset to be used in other projects?
View 9 Replies View RelatedI have just tried plugging a Samsung SSD capable of 400+MB/s into a thunderbolt caddy. In action and on the desktop it behaves as normal. But in the player it plays at about 100fps. how to get it to play at speed.
The project config is HD 25 psf free. Smoke SAP2 SP2ssd_storageplaybackspeedissue.mov
[URL]
Working in Smoke 2013 pre-trial v3, and I've been wondering why every clip I import has the resize filter? Every video and graphic in the XML has a resize filter even though they are they same aspect ratio as the sequence. I've tried this with a NTSC and 1080i sequence and they've both had the same issues. I even imported a clip through the media hub and I had the same result. When I look at the clip in Final Cut, it is the same setting as the sequence so I don't have to render. In Smoke, I enter the resize editor and I don't see any resizing.
View 6 Replies View RelatedPR5. Up until this release, I haven't had a problem exporting quicktime movies. I have a 2:30 long video that I'm trying to export with no success, at best I'll get 30 seconds of my project. I'm not as familiar with Smoke setups and preferences
View 9 Replies View RelatedI got a clip imported with cache ON. So it's transcoded into stone and not linked to original file. When i check the file info, there's no path to original file, so i don't know where is the source path. I put that clip on timeline, and press 'pre-processing' button, i got error msg : 'cannot find the original media'. How can i fix this since the clip's info itself shows no track to the original file.
Actually, i know where the location of the original clip is. It's in one of my external drive, if i reconnect the drive then it will fix the error.
Trying to conform Canon C300 MXF media from 3 different drives. My source footage is spread across 3 TB of portable drives, so I'm trying to conform each drive's footage, cache the media, then move on to the next drive.
This mostly worked, but there's about a half dozen clips that refuse to cache for some reason. Everything looks fine when the drive is plugged in - then I consolidate handles, then go to the sequence and choose CACHE MEDIA - Backburner kicks in and says 100% complete.
But then I have to quit Smoke to eject the drives and connect a different one, and when I start Smoke again, MOST of the clips are there, but some of the clips are not. They do not say Unlinked or checkboards - but they are just black. (One time it showed RED frames - WTF??). If I reconnect the HD, the clips show up, so it's obviously still reading it from the portable drive.
Is there an option to force cache individual clips?.
I tried unlinking/relinking thos problem clips, and even Hard Committing the GAP layer above - and those few clips still do not cache - even the hard commit goes black when the drive is disconnected. How is that even possible? Do I need to add an Axis Effect to force a render, then commit those frames?
why the BB would say 100% complete, but not all clips are truly cached?
SmokeUser since 2012
MacPro w/ K3
32 GB RAM
CalDigit HdPro2 RAID
I've been archiving then deleting projects out of Smoke. However, my media hard drive is not gaining available space.
Is there a safe way to purge any unused media?
This is similar to something I have asked for before regarding managing media in remote/networked machines. But I can't find a way to delete media (individual clips or folders) from a nother project within my machine without switching to/loading up that project. At present in 2012 and as far back as I can remember I have had the ability to move and manage media withing other projects on the host machine as well as remote/networked machine.
Is there a button/preference I'm missing as this is integral to the workflow I use.
I was trying to find in the documentation a section about importing media and replacing media. I work at a VFX facility where we mostly work with EXR sequences and getting our footage as RED files.
So in an ideal world we would do the conform in Smoke and push out EXR files for the vfx/nuke/maya guys. And then be given back a EXR sequence with the timecode still intact.And in an ideal world, we would not get new EDL's from the offline facility in the middle of the project.
All of the above is a urban myth, the ideal world doesn't exist.And now for some questions from a not-so-ideal-world-situation.
1.) So how would you in Smoke2013 go about and compare EDL's so that you don't need to conform things that you already have?
2.) What if a clip is just 15 frames longer in the new EDL, would it be possible to extend a already existing clip?
3.) EXR's has lost their timecode, but we know with clip it is, how do we replace the clip? And would it be possible to "tag it" with a new timecode.
I wonder how many of you would love to have that back. Cant find a poll option here. So guess just reply. Not that its gonna change anything. But atleast we would know how many wish to see it as it used to be. May be AD might have second thoughts.
Currently dancing between Flame Premium 2013x2sp3/2013Sp4 nd Smoke on mac 2013Ext1
Few times already, deleted one media storage in smoke setup and tried to ad another one, and it doesn't want to add. every time i reload it's empty. Only work around is to to uninstall Smoke and install again and then to add new volume.
View 3 Replies View RelatedI have a timeline made in Smoke and I'm wanting to only export a section of it. In other programs I would set an In and Out point and it would export just the range I've selected, but in Smoke.
View 2 Replies View RelatedJust spent about 4 hours working on a cfx in a timeline then came back and discovered the clip it was linked to had disappeared from the timeline. Luckily I'd been saving setups along the way. But when I reload the setup, all I see are black frames with red text underneath as my sources. It's all copies of the file the connectfx was originally attached to, and the new clip name and length is the same, but somehow smoke doesn't know to connect them in the same way. Each of these clips were locked on a particular frame which I then had a paint node attached to (trying to paint up individual clean plates). I can replace each of the clip nodes manually, but how do I see which frame it was locked on originally?
Smoke 2013 EXT1
iMac i7 3.4Ghz
NVIDIA GeForce GTX 680MX 2048 MB
32GB RAM
MAC OS X 10.8.3
Promise R6
I am trying to cache some exr files and for some reason Smoke can´t read the files:
Using the media hub I am able to view the exr file and can work with them as long as I don´t cache them. As soon as I cache them they are black and I get the message "unable to read media"
Is this some known bug? Backburner works perfectly (after tweaking some things with Mikes great tutorial), I can cache other files but not these exrs.
The Thumbnail in the media library are not useable. They need to be larger. I know the desktop is also an option, but for quick scanning, they don't serve there purpose.
View 3 Replies View Relatedi have done a new media storage on the smoke setup window, how do i delete it now?
View 4 Replies View RelatedHow I can reload my media when it is updated on server. Imagine I conformed and few shots got graded and I have to reload them. I just look for a simple trick to reload my media and see the update version on my timeline.
Smoke 2013 Ext1
Mac OS X 10.7.5
2*2.4 Ghz Quad-Core Intel Xeon
14 GB RAM
Quadro 4000
AJA Kona 3